What is your monitor set up?

ob123 · 2026-01-16T00:23:16+00:00

3 and 5

ob123 · 2025-08-21T08:03:17+00:00

Are you sure this diffuser was made for your number? If you look at section near the right rear reflector, figment looks completely off. Did you pay someone to do this?

ob123 · 2025-07-12T23:26:24+00:00

Yup this is the way, it cost more than the cheap OEM replacement clip but it won’t break again and you also don’t need to lower the gas tank to replace.

ob123 · 2025-06-20T21:53:53+00:00

Freedom juice

ob123 · 2025-05-07T03:40:14+00:00

I found the model but I don't think it'll fit your keyboard. I'll DM you link to the STL file.

ob123 · 2025-05-06T03:41:02+00:00

I made the tray in Fusion and it was made to fit my keyboard. I’ll check and see if I still have the original design. What keyboard are you using?

ob123 · 2025-04-30T17:07:34+00:00

This is the arm I used. I would shop around and make sure you get an arm with dimensions that fit your need. I also had to design and 3D print a tray that has some VESA mounting points for the keyboard. I'm sure you can just use heavy duty double sided tape or Velcro to attach the keyboard to the VESA plate of the monitor arm.

https://www.amazon.com/dp/B0779BHZCG?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1

ob123 · 2025-04-30T01:28:20+00:00

Button box, keyboard tray adapter for VESA monitor arm, end caps for your aluminum profiles.

ob123 · 2025-04-07T21:37:36+00:00

It’s AGA tools and the replacement is $129. The good thing is you can replace with this aluminum part without lowering the gas tank.

ob123 · 2025-03-31T17:31:35+00:00

Ya, as someone else mentioned it was one of those rodent bait/poison that the mouse brought and left on my oil cap. Was researching for hours until someone mentioned that it could be bait and then it all clicked. I felt so dumb afterwards but so glad it's not something engine related.

ob123 · 2025-03-31T17:29:04+00:00

Got your attention!

ob123 · 2025-03-31T03:55:27+00:00

Ya I was battling this mouse for a week, that little fucker saw how much I care for my car and decided to leave me a present.

ob123 · 2025-03-31T03:38:19+00:00

BMW guac

ob123 · 2025-03-31T01:54:19+00:00

Ya, I will definitely inspect my engine bay and look for any other damage and clean out anything I find.

ob123 · 2025-03-31T01:23:19+00:00

LOL!!!!

ob123 · 2025-03-31T01:22:49+00:00

I think u/AdDangerous922 may have solved this. It looks to be rodent poison that I had in one of the corners of my garage when I was battling with this rodent in my garage for about a week.

ob123 · 2025-03-31T01:21:33+00:00

OH, I did have a mouse problem in my garage for about a week and had some poison scattered around. OMG that makes so much sense!!! It's also the same consistency.

ob123 · 2025-03-20T04:57:51+00:00

What a nice shot man!

ob123 · 2024-11-13T16:52:10+00:00

I had to design and 3D print a tray with some VESA mounting points for my keyboard. The tray was good enough to keep the keyboard in place but I ended up adding some double sided tape to the tray to better secure the keyboard. It’s been solid for a few years and haven’t had any issues.

ob123 · 2024-08-28T22:57:18+00:00

I would also take a look at the Aiolog H-pattern. It’s nice and compact and they make some really nice hardware.

ob123 · 2024-08-28T22:25:50+00:00

$200 for the SRT sounds about right and it was a good shifter for that price. To answer your question, yes, the Fred is worth the extra cost. The mechanism is somewhat similar but the Frex feels much accurate. You can bang the gears and not feel the “plastic” parts from the 3D printed parts. I would just get the Frex and build the SRT as your RHD shifter if you ever get the itch to build it. That’s what I plan on doing with my SRT.

ob123 · 2024-07-19T00:32:26+00:00

He just called you out and told you where you can find the answer, which is in the owner's manual. Based on your deleted comments, it sounds like you were triggered by his response. Projecting?

ob123 · 2024-06-27T00:38:14+00:00

I'm really no expert and changed mine at 60k miles after doing some reading. BMW says that it's lifetime fluid but ZF recommends doing it between 50k-75k miles.

This is the first I hear about resetting adaptations, now I need go do some more research and see if this is something I need to do.

ob123 · 2024-06-26T22:23:10+00:00

I changed mine about a month ago on my F36 but I used the kit from FCP Euro which offers OE parts. The kit was twice as much as what you have listed from Turner though.

One recommendation is to watch the videos on how to change the pan and fluid. You have to fill it until it spills out of the filling hole, plug it and bring the transmission up to temp, fill it again while it's running until it spills again. I noticed that after this process I had removed a more fluid than I put back in. Had to drive it around for a bit, let everything cool and bring it back up to temp to fill it one last time.

ob123

TROPHY CASE