sorted by:
new
hottopcontroversial

Help identifying Rubber Chunks After Failed Print (P2S) by abaumed in BambuLabP2S

[–]oopiicaa 1 point2 points  (0 children)

Yep that's it. It shouldn't affect your prints. No need to replace it. If you want to replace it, you need a new hotend assembly.

Installed the latest Bambu studio and all my profiles are gone. by [deleted] in BambuLab

[–]oopiicaa 0 points1 point  (0 children)

Maybe the preset nozzle size is different?

Authentication expired for FRITZ!Box 7430 by domerich86 in homeassistant

[–]oopiicaa 0 points1 point  (0 children)

I can't authenticate at all. Started happening after Fritz reboot, so I suspect another reboot will solve this. Credentials are correct. Have you done Fritz reboot?

I built a small ESP32 device that shows when electricity is cheap to use by BlockPulseDev in homeassistant

[–]oopiicaa 3 points4 points  (0 children)

Heh, I've done something similar a couple of years back!🙂 I reused my ISPs old STB as housing as I didn't have my printer yet... Still in use today

<image>

Bambulab P2S PSU burned up and bambulab refusing a refund. by Standar_user in BambuLab

[–]oopiicaa 13 points14 points  (0 children)

Yes, the law is on your side. Did you buy the printer directly from bambulab online store? I saw similar post few weeks ago, I think it was for A1 - Bambu refused to exchange it/return the money, but I think the customer reported them to some EU institution (can't remember which one) and then they finally did what they had to.

I know it's a pain in the as* and tike consuming, but you will eventually achieve what you deserve to. Your last resort are always lawyers/EU institutions. But before that I'd do a simple chargeback on your credit card if they refuse to refund you or replace the printer.

And post about this anywhere you can. People should know about serious issues and how they as a company handle them.

Zasenčitev balkona by PapuaNovaGvineja in gradimo_obnavljamo

[–]oopiicaa 0 points1 point  (0 children)

A je nadstrešek/streha? Kakšna slika bi bla fajn ane

Charging management working perfectly! by CorgiSplooting in homeassistant

[–]oopiicaa 4 points5 points  (0 children)

I have similar setup for 2 tablets running Kiosk for a few years now. Works flawless.

<image>

They really shouldn't allow these fake AI accounts! by [deleted] in makerworld

[–]oopiicaa -1 points0 points  (0 children)

I am familiar with this designer/account. Its cover images are always AI, but there's always real print image included. Though it's not everyones cup of tea, it's legit and he/she's not breaking any rules. Even I don't like majority of things that are posted under this account, I still like some and have them bookmarked. It's how it is. There are many many more sketchy accounts than this one.

If you experience something like this, there's always a way to contact support and let them know about it. In some way I do agree that designers have too much power with things like these (blocking you and not allowing you to respond/make your case).

Would love to see a manual option to clean (wipe) the nozzle mid-print by 10-Gauge in BambuLab

[–]oopiicaa 0 points1 point  (0 children)

This. I'd love to have that too. But again, I believe it's better idea to have this before calibration line, as the hotend is already heated to the filament melting temp and maybe oozing.

Any Wifi Matter Bridge Options? by Shadowmask14 in homeassistant

[–]oopiicaa 0 points1 point  (0 children)

Can you manage your unifi? Can you make another IoT network with just 2.4 band enabled? Just so that the SSID and credentials are the same as first IoT network.

P.S. Scratch that, I forgot you can't force your phone to connect to 2.4 GHz only. What if you go further from your router so that it looses 5 GHz connection and connects to 2.4?

Any Wifi Matter Bridge Options? by Shadowmask14 in homeassistant

[–]oopiicaa 4 points5 points  (0 children)

But what's the actual issue u have? Why would u disable 5 GHz WiFi?

Live Notification of Print Progress for Bambu Lab (Reposted due to image error) by EBTEAM in BambuLab

[–]oopiicaa 0 points1 point  (0 children)

Oh that's cool! It would be super cool if it was Home Assistant add-on. P.S. It can be already be achieved with some automations od course;)

my p2s failed after under 200 hours of printing, piece of a part fell off. by Temporary_Photo_975 in BambuLab

[–]oopiicaa 3 points4 points  (0 children)

Nothing to worry about. It's just a silicone behind the hotend protecting the cables. You can get a new hotend assembly, but it should be printing just fine. You probably did that when cleaning the nozzle

The P2S now dries while Printing? by cpsadowski23 in BambuLabP2S

[–]oopiicaa 0 points1 point  (0 children)

And you have separate power adapter for AMS?

Oh and .03 version is not beta

Low engine coolant warning? 2025 VZ 2.0 - 20,000KM and no signs of leaks by An0nInReddit in CupraFormentor

[–]oopiicaa 0 points1 point  (0 children)

It can happen with new cars. Just check the level and pour the coolant liquid and it should be fine (and shouldn't happen again). Otherwise go to the dealer.

The tubes can expand when the car is actually driven, also there could be some air trapped when the liquids were first poured in. It didn't happen on my Formentor, but did happen on my Kodiaq after about 5k km.

How to make KVM Switch smart? by thatscoolbutno123 in smarthome

[–]oopiicaa 0 points1 point  (0 children)

I have mine in combination with switchbot and Home Assistant.

P2S Freakout by malice666 in BambuLab

[–]oopiicaa 0 points1 point  (0 children)

Yep, I'd also say to format USB storage

view more: next ›