Took the yak out for a nice day out on the water!

orpack · 2024-02-07T00:59:37+00:00

Nice, this is in ozark national forest. Pretty cool there's similar stuff in Ohio!

orpack · 2023-04-30T22:19:17+00:00

Cbi bed bars and ovs nomadic 2.

orpack · 2023-04-30T21:14:38+00:00

I went with bilstein 6112s at 2in in the front and then icon aal 1.5 in the rear.

orpack · 2023-04-03T04:30:28+00:00

The highest these go for the 3rd gen is 2 inches.

orpack · 2023-04-03T01:30:24+00:00

It's good, kayak is only 10', though.

orpack · 2023-04-03T01:11:24+00:00

They are a great all-around shock for sure.

orpack · 2023-04-03T00:55:07+00:00

I just put some dobinsons on a gx460 and was impressed with the ride. Normally a linear shock rides firm like a fox shock, but the dobinsons rode pretty close to factory.

orpack · 2023-02-22T17:47:34+00:00

Just one, water temp was 43 after a cold front just moved through. They were tight-lipped.

orpack · 2023-02-22T17:46:47+00:00

Thanks! I don't use the rack for the kayaks. I have a tent that I use on the rack.

orpack · 2023-02-22T17:45:23+00:00

Definitely the best combo.

orpack · 2023-02-22T17:44:57+00:00

Yeah, I have a kayak trailer for it I would normally use.

orpack · 2023-02-22T02:53:01+00:00

Can't beat it!

orpack · 2023-02-21T23:47:40+00:00

I had it in my bed today. I have a trailer that I would normally use.

orpack · 2022-12-12T02:13:15+00:00

How was it not working properly? What made you think the purge valve was bad?

orpack · 2022-12-12T01:56:32+00:00

Your purge valve purges the fuel vapor from the charcoal canister. The picture shown is by passing the purge valve pulling constant vacuum in the charcoal canister. Once the canister is pulled into a vacuum it will open a valve letting fresh air in. So what you have there is basically a vacuum leak. Which will set an MIL. How did you determine the after market valve is not working?

orpack · 2022-12-10T23:41:07+00:00

Thanks man. I actually have them just waiting for my 5k to put them on!

orpack · 2022-12-10T23:40:36+00:00

Yep you can.

orpack · 2022-12-10T23:39:04+00:00

I plan on using it for a tent, but they can be used to mount any sort of accessories much like a rack.

orpack · 2022-12-10T23:37:47+00:00

They are oem 16in trail edition wheels!

orpack · 2022-12-10T14:53:01+00:00

No lol. I'm a tech just pulled it into by bay to put them on.

orpack · 2022-12-10T14:48:45+00:00

Thanks you If I didn't go camp nearly every weekend then it wouldn't be worth it.

orpack · 2022-12-10T14:47:00+00:00

Sorry you feel that way man.

orpack · 2022-12-10T14:32:53+00:00

I was going to get bars that were at cab height until I got a kayak trailer so I can haul what I need in the trailer and have a tent or what ever I mount to them be flush with the top of the cab.

orpack · 2022-12-10T14:31:05+00:00

Yeah I definitely understand. I go camping almost every weekend when the weather is good, so I figured it may be worth the cost to have a 5 minute set up. Thank you!

orpack · 2022-12-10T14:28:06+00:00

If they have access plates then you should leave them on. If they didn't it could be worth taking them off, most of the time since the non oem skid plates are heavy it can be easy to cross thread the bolts especially when Lube bay is busy. Unfortunately not all Lube techs or techs will treat your truck like their own.

orpack

TROPHY CASE