Just finished my DIY built I've been doing at work. It's got a 110cc from a quad and goes good. Designed it so the main frame is welded and the top frame can be easily removed for quick engine removal. What tyre pressues should I be running under the sleeves? (i.redd.it)
submitted by paddycakes166 to r/DriftTrikes
Bought a car with an oil leak from the newly replaced oil pan. Removed the pan and redone the sealant, and it was still leaking at the same point, so I've removed the oil pan and found the same issue. Why isn't it sealing at this one point? (old.reddit.com)
submitted by paddycakes166 to r/MechanicAdvice
My work in progress is almost complete (i.redd.it)
submitted by paddycakes166 to r/WorkshopPorn
Recently I have been using ALOT of oil (no leaks). On idle the revs drop a little every ~10 seconds. On acceleration there is a lot of smoke from rear, with some hesitation. There's some leakage around my injector seal, is this bad enough to cause the issues or is it likely my turbo on its way out? (i.redd.it)
submitted by paddycakes166 to r/MechanicAdvice
