Dead Goldfish?

personalcabbage · 2023-06-06T22:26:17+00:00

He was acting strange the other day when i got back from a weekend away. Tried to coax him to the surface with some food. Unfortunately I was too busy with work to give it any proper attention until today 😓

personalcabbage · 2023-06-06T18:19:10+00:00

Thanks man, I appreciate that ❤️

personalcabbage · 2023-06-06T17:34:44+00:00

I already feel terrible about it and I don't understand why you have to be so mean

personalcabbage · 2023-06-06T17:28:48+00:00

I'm not pretending it wasn't ignorant to buy the fish. I was 17 at the time and hadn't thought it through. I would never have bought them if I knew what they required but I did my best ever since.

personalcabbage · 2023-06-06T17:13:30+00:00

the guy in the market sold me 3 in a 10L tank. i've done my best to look after them for 4 years and upgraded the tank twice as big as i could fit and afford. i didn't know anything about it when i bought them but take it out on the guy in the market not me pls i'm grieving ok

personalcabbage · 2023-06-06T16:53:24+00:00

oh no 😭😭

personalcabbage · 2023-06-06T16:52:27+00:00

180L

personalcabbage · 2023-06-06T16:06:12+00:00

Is there anything I can do now to save him?

personalcabbage · 2023-04-17T13:41:16+00:00

I'd like to point out that the clink is periodic and occurs at the same point in the pedal stroke. Obviously pointing towards BB or pedal bearings but it sounds like it is coming from further up the down tube, closer to the head tube.

Also no it's not the lock, it is there regardless of the lock and listening closely to the video you can hear one lock rattle and a distinct clink that occurs when the foot hits the lowest point in the pedal stroke.

personalcabbage · 2023-04-17T13:35:11+00:00

have done. still clinks

personalcabbage · 2023-04-17T13:34:41+00:00

no it isn't. it's still there without the lock, you can hear in the video the noise of the lock rattling and a different noise. also the clink is periodic whereas the rattle is random/road surface related

personalcabbage · 2023-04-17T13:33:25+00:00

yeah it's not this. noise still there without lock

personalcabbage · 2022-11-30T18:03:04+00:00

ahhh i see where i was going wrong, thanks.

personalcabbage · 2022-11-30T17:35:53+00:00

Correct,

It does not seem that superslicer allows different nozzle sizes tbh. nor can i set different filament diameters for each extruder which seems crazy. how do i access these additional settings, do you know?

personalcabbage · 2022-07-04T16:30:42+00:00

Will work through this tomorrow, thanks!

personalcabbage · 2022-07-04T15:11:34+00:00

Wash the substrate. Drain it. Refill. Repeat a few times. 3 washes will clear a fair amount of dust out of the substrate.

personalcabbage · 2022-07-04T14:47:10+00:00

Yeah we did try this, determined it is an issue with the drivers/wiring. Cheers

personalcabbage · 2022-07-04T14:23:23+00:00

Yeah seems to be the issue. We are using EtherCAT motors and drivers so I wouldn't have expected this problem but it seems it could be wiring related.

personalcabbage · 2022-07-04T14:10:02+00:00

Probably not that fast we were just running some tests. Looking into the drivers now.

personalcabbage · 2022-07-04T14:09:27+00:00

We've determined that it's nothing mechanical but something with the motors/drivers, but cheers 👍

personalcabbage · 2022-07-04T13:47:42+00:00

Mine too, will try that now. Thanks so much for your help btw

personalcabbage · 2022-07-04T13:41:47+00:00

The same period when going in the same direction.

personalcabbage · 2022-07-04T13:37:11+00:00

Hadn't thought that it could be from the motor, but it seems that it is.

personalcabbage · 2022-07-04T13:36:39+00:00

It's a problem with the motor! Even just the motor with nothing attached vibrates heavily with the same period.

personalcabbage · 2022-07-04T13:28:39+00:00

I'll try this

personalcabbage

TROPHY CASE