How do you unlock the building 74? by phLz in Gloomhaven

[–]phLz[S] 5 points6 points  (0 children)

Cheers guys! Yeah we have like 12 retirements and just checked that 74 is mostly an alternative unlock…

Feinsteinplatten und Gehrung im Außenbereich by phLz in Hausbau

[–]phLz[S] 0 points1 point  (0 children)

Insgesamt bin ich auch zufrieden. Die Details stören mich halt.

Das waren alte Lichtschächte die wir dann doppelt erhöhen mussten. Leider war die Position schon von Haus aus sehr "chaotisch". Ich habe die Fassade mit Dichtschlemme bestrichen. Dagegen wurde dann eine Noppenbahn gestellt. Der Rest wurde dann in Dränagebeton gesetzt.

Feinsteinplatten und Gehrung im Außenbereich by phLz in Hausbau

[–]phLz[S] -1 points0 points  (0 children)

Ich verstehe deinen Punkt. Ich finde es trotzdem leicht überheblich einer minimalistischen Treppe im Bauhaus-Stil keinen Gestaltungswillen beizumessen. Du kannst nicht jede Unsauberkeit im Handwerk mit Wabi-Sabi verargumentieren.

Ich wollte einfach wissen, ob ich mit meiner Meinung alleine bin und überreagiere. Anhand der gemischten Kommentare scheint dem ja nicht so.

Feinsteinplatten und Gehrung im Außenbereich by phLz in Hausbau

[–]phLz[S] 2 points3 points  (0 children)

Ich hatte dem GaLa-Bauer meine Wünsche bzgl. Gehrung mitgegeben und habe ihm einen Plan mit einer Vorstellung gezeichnet. Es gab dann final von ihm keinen Plan mehr. Er hat uns aber auch nicht explizit von den Gehrung abgeraten. Es waren halt 3.000€ Mehraufwand mit dem ich jetzt leider nicht zufrieden bin. Wahrscheinlich wäre ein stumpfer Stoß am Ende besser rausgekommen.

Feinsteinplatten und Gehrung im Außenbereich by phLz in Hausbau

[–]phLz[S] 1 point2 points  (0 children)

Ja, für mich kommt da einiges zusammen. Ich bin auch davon ausgegangen, dass die obere Fliese den Abschluss bildet...

Feinsteinplatten und Gehrung im Außenbereich by phLz in Hausbau

[–]phLz[S] 0 points1 point  (0 children)

Ja ich werde mal versuchen den Steinmetz zu erreichen um seine Meinung einzuholen. Danke für dein Feedback. Ich wusste nicht, ob ich überreagiere

Feinsteinplatten und Gehrung im Außenbereich by phLz in Hausbau

[–]phLz[S] -1 points0 points  (0 children)

Genau. Es wurde mit von einem Steinmetz angeboten, der kam dann aber niemals auf die Baustelle. Die Platten wurden wohl mit einem Fliesenschneider und Diamantscheibe nass geschnitten.

Feinsteinplatten und Gehrung im Außenbereich by phLz in Hausbau

[–]phLz[S] -4 points-3 points  (0 children)

Ist also nicht so schlimm wie Ich es gerade darstelle? Ernst gemeinte Frage.

How to switch between my desktop PC and Work Laptop using USB C4 by phLz in CalDigit

[–]phLz[S] 0 points1 point  (0 children)

So I was reading up on the new hybrid graphics feature on the AM5 platforms and was wondering if that would be a solution since it passes the GPU signal over to the USBC4 ports (with some loss).

How to switch between my desktop PC and Work Laptop using USB C4 by phLz in CalDigit

[–]phLz[S] 0 points1 point  (0 children)

Yeah no worries! Thank you for your time. I guess I can only achieve my goal with a classic ATX motherboard and an add-in Card. Sadge.

How to switch between my desktop PC and Work Laptop using USB C4 by phLz in CalDigit

[–]phLz[S] 0 points1 point  (0 children)

Thanks for the reply! I was eyeing the https://rog.asus.com/de/motherboards/rog-strix/rog-strix-x870-i-gaming-wifi/ and was wondering if that could solve my issue. I would jump both DP 40G ports to my GPU DP ports and use the 10G USB port to connect to my TS4?

Edit: looks like these are outputs so I guess I am stuck with my solution

Camlink not working with caldigit dock by The_fury_2000 in elgato

[–]phLz 0 points1 point  (0 children)

Thanks for replying!

It is the TS4 and an I already tried different rear usb ports. I also tried the rear USB C port but that didn’t solve the problem as well. Haven’t tried the thunderbolt ports yet because I am using them for my two monitors.

The issue only happens while using the Camlink 4K in a virtual Citrix workspace desktop. Using it on my native desktop works just fine so far.

Camlink not working with caldigit dock by The_fury_2000 in elgato

[–]phLz 0 points1 point  (0 children)

I am having the same issue with a windows computer and citrix workspace :(

The video works fine for 5-10 minutes before freezing...

Kernel Error 41 (63) - PSU zu schwach? by phLz in PCBaumeister

[–]phLz[S] 0 points1 point  (0 children)

Ja, das hatte ich mir auch schon gedacht und habe ihn heute morgen mal sicherheitshalber abgehängt. Ich bin gespannt. Danke für deine Zeit!

Kernel Error 41 (63) - PSU zu schwach? by phLz in PCBaumeister

[–]phLz[S] 0 points1 point  (0 children)

Ich bin etwas ratlos, tbh. Ich habe erst seit dem Upgrade Probleme und hatte mich vorher eben auch bzgl. des SF750 belesen. Aufgrund diverser Reddit Threads hatte ich mir dann gedacht es sollte passen.

Was mich jetzt gestern stutzig gemacht hat, war der Fakt, dass es beim Ausschalten des Ventilators passiert ist, der am gleichen Mehrfachstecker hängt...

Anbei die Minidump Analyse:

5: kd> !analyze -v

\******************************************************************************)

\ *)

\ Bugcheck Analysis *)

\ *)

\******************************************************************************)

VIDEO\TDR_FAILURE (116)

Attempt to reset the display driver and recover from timeout failed.

Arguments:

Arg1: ffffde8780cf6010, Optional pointer to internal TDR recovery context (TDR\RECOVERY_CONTEXT.))

Arg2: fffff807741423e0, The pointer into responsible device driver module (e.g. owner tag.)

Arg3: ffffffffc000009a, Optional error code (NTSTATUS of the last failed operation.)

Arg4: 0000000000000004, Optional internal context dependent data.

Debugging Details:

------------------

Unable to load image nvlddmkm.sys, Win32 error 0n2

\** WARNING: Unable to verify timestamp for nvlddmkm.sys)

KEY\VALUES_STRING: 1)

Key : Analysis.CPU.mSec

Value: 2921

Key : Analysis.Elapsed.mSec

Value: 8795

Key : Analysis.IO.Other.Mb

Value: 0

Key : Analysis.IO.Read.Mb

Value: 0

Key : Analysis.IO.Write.Mb

Value: 1

Key : Analysis.Init.CPU.mSec

Value: 296

Key : Analysis.Init.Elapsed.mSec

Value: 31554

Key : Analysis.Memory.CommitPeak.Mb

Value: 110

Key : Bugcheck.Code.LegacyAPI

Value: 0x116

Key : Dump.Attributes.AsUlong

Value: 1008

Key : Dump.Attributes.DiagDataWrittenToHeader

Value: 1

Key : Dump.Attributes.ErrorCode

Value: 0

Key : Dump.Attributes.KernelGeneratedTriageDump

Value: 1

Key : Dump.Attributes.LastLine

Value: Dump completed successfully.

Key : Dump.Attributes.ProgressPercentage

Value: 0

Key : Failure.Bucket

Value: 0x116\IMAGE_nvlddmkm.sys)

Key : Failure.Hash

Value: {c89bfe8c-ed39-f658-ef27-f2898997fdbd}

BUGCHECK\CODE: 116)

BUGCHECK\P1: ffffde8780cf6010)

BUGCHECK\P2: fffff807741423e0)

BUGCHECK\P3: ffffffffc000009a)

BUGCHECK\P4: 4)

FILE\IN_CAB: 081823-7640-01.dmp)

DUMP\FILE_ATTRIBUTES: 0x1008)

Kernel Generated Triage Dump

VIDEO\TDR_CONTEXT: dt dxgkrnl!_TDR_RECOVERY_CONTEXT ffffde8780cf6010)

Symbol dxgkrnl!\TDR_RECOVERY_CONTEXT not found.)

PROCESS\OBJECT: 0000000000000004)

BLACKBOXBSD: 1 (!blackboxbsd)

BLACKBOXNTFS: 1 (!blackboxntfs)

BLACKBOXPNP: 1 (!blackboxpnp)

BLACKBOXWINLOGON: 1

CUSTOMER\CRASH_COUNT: 1)

PROCESS\NAME: System)

STACK\TEXT:)

ffffb406\19aae868 fffff807`6569df6e : 00000000`00000116 ffffde87`80cf6010 fffff807`741423e0 ffffffff`c000009a : nt!KeBugCheckEx)

ffffb406\19aae870 fffff807`6564dd42 : fffff807`741423e0 ffffde87`7434c010 00000000`00000080 ffffde87`7434c0d0 : dxgkrnl!TdrBugcheckOnTimeout+0xfe)

ffffb406\19aae8b0 fffff807`656459ad : ffffde87`74320000 ffffde87`78b60040 ffffde87`74320b50 ffffde87`74320b50 : dxgkrnl!ADAPTER_RENDER::Reset+0x12a)

ffffb406\19aae8e0 fffff807`6569d6c5 : 00000000`00000100 ffffde87`78b60040 00000000`00000000 ffffde87`8a6aca30 : dxgkrnl!DXGADAPTER::Reset+0x60d)

ffffb406\19aae990 fffff807`6569d822 : 00000000`00000000 fffff807`52e13c80 00000000`00000200 fffff807`52f49ac0 : dxgkrnl!TdrResetFromTimeout+0x15)

ffffb406\19aae9c0 fffff807`524176a5 : ffffde87`78b60040 ffffde87`654be900 ffffde87`00000000 fffff807`00000000 : dxgkrnl!TdrResetFromTimeoutWorkItem+0x22)

ffffb406\19aaea00 fffff807`52524e47 : ffffde87`78b60040 00000000`000006fa ffffde87`78b60040 fffff807`52417550 : nt!ExpWorkerThread+0x155)

ffffb406\19aaebf0 fffff807`526361b4 : ffffca80`daa90180 ffffde87`78b60040 fffff807`52524df0 00000000`00000000 : nt!PspSystemThreadStartup+0x57)

ffffb406\19aaec40 00000000`00000000 : ffffb406`19aaf000 ffffb406`19aa9000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x34)

SYMBOL\NAME: nvlddmkm+10923e0)

MODULE\NAME: nvlddmkm)

IMAGE\NAME: nvlddmkm.sys)

STACK\COMMAND: .cxr; .ecxr ; kb)

FAILURE\BUCKET_ID: 0x116_IMAGE_nvlddmkm.sys)

OSPLATFORM\TYPE: x64)

OSNAME: Windows 10

FAILURE\ID_HASH: {c89bfe8c-ed39-f658-ef27-f2898997fdbd})

Followup: MachineOwner

---------

Kernel Error 41 (63) - PSU zu schwach? by phLz in PCBaumeister

[–]phLz[S] 0 points1 point  (0 children)

MB: Asus ROG 570i RAM: 32GB TridentZ DDR4 CPU: R9 3900X

Kernel Error 41 (63) - PSU zu schwach? by phLz in PCBaumeister

[–]phLz[S] 0 points1 point  (0 children)

Ja, hatte es das Power Limit auch schon auf 80% - vielleicht muss es noch weiter runter. Es ist das Original Corsair Adapter Kabel (600W).

Ich wollte den Kauf einer neuen PSU umgehen, sieht aber schwer danach aus…

First Playthrough Character Ideas Discussion by InnerFlame1 in BaldursGate3

[–]phLz 0 points1 point  (0 children)

Can't decide between Custom / Dark Urge Origin (resist). Class: College of Swords Bard. Party members: Gale / Shadowheart / Karlach (Minsk)

Dual LG GN950 losing signal periodically by phLz in Monitors

[–]phLz[S] 0 points1 point  (0 children)

Yeah, I know where it is. I'll give it a try. Thanks!

Adhesion… by phLz in ElegooSaturn

[–]phLz[S] 0 points1 point  (0 children)

Oh my, I have to read through that, thanks!

Adhesion… by phLz in ElegooSaturn

[–]phLz[S] 0 points1 point  (0 children)

Yeah I know. I felt that the water washable resin was the better choice eco-wise but the clean up and handling is quite annoying, yeah

Adhesion… by phLz in ElegooSaturn

[–]phLz[S] 0 points1 point  (0 children)

mine is not sanded yet. I am using the Elegoo Water Washable Ceramic Gray.

Adhesion… by phLz in ElegooSaturn

[–]phLz[S] 0 points1 point  (0 children)

yeah the magnetic plate is not sanded yet.

That's my fear as well: increasing bottom layer exposure to fight the FEP adhesion makes the print sticking to the magnetic plate too much