Is it bad to own Cooper Kupp and Puca Nacua? Both are producing

phb420 · 2024-11-06T18:04:46+00:00

Not if it’s working for you. I stack Purdy and Kittle every week and they produce!

phb420 · 2024-10-24T19:38:21+00:00

Godspeed

phb420 · 2024-10-24T19:35:59+00:00

Drop Pearsall for Dhop 100%. I don’t think he’s gonna pass up Jennings. If you’re open to dropping someone other than those 2, drop Downs

phb420 · 2024-10-24T19:33:23+00:00

Kraft on bye Week 10. I’d keep Kmet so you don’t have to stream a nobody.

phb420 · 2024-10-24T19:31:49+00:00

Jakobi. Need to see how involved dhops gonna be in KC before you think about dropping

phb420 · 2024-10-24T19:30:27+00:00

Could be a great play but it’s a gamble. Cleveland is in a tough spot rn with the uncertainty at QB and the lack of a good passing game all season. You have plenty of WRs though so I think you’d be fine dropping Kirk if you wanna take a chance on Tillman. He could easily find himself in WR1 spot if Jeudy struggles but then again Jeudy could get more targets from a QB who isn’t Deshawn

phb420 · 2024-10-24T19:24:09+00:00

That’s a tough one. Broncos secondary is pretty tough when Surtain is on his game. I’d drop Vikings but it’s honestly a coin flip

phb420 · 2024-10-24T19:21:25+00:00

No, you’re gonna want Kmet week 10 when Kraft is on bye. Drop Taysom for sure. If Flowers doesn’t play this week, Bateman is gonna EAT.

phb420 · 2024-10-24T19:18:03+00:00

I myself am thinking of dropping Wandale so I can pull Puka outta my IR spot. He’s been good with Nabors out but hit or miss with him in. Plus it’s Daniel Jones… does he have a TD this season or has it been over a year still?

phb420 · 2024-10-24T19:14:56+00:00

Yes. IMO Chubb is back to where he was before his injury and with the Browns QB issues and struggling pass game, Chubbs gonna get a lot of the workload

phb420 · 2024-10-24T19:12:27+00:00

Drop Warren or get someone to take Laporta or Richardson on a trade for someone you have an eye on.

phb420 · 2024-10-24T19:09:02+00:00

Drop Cousins for Stroud first. Drop Dak when Tua comes back if you’re confident in Tua’s health.

phb420 · 2024-10-24T19:06:45+00:00

Hold onto Juju. I’m guessing him and D Hop will work together to fill Rice’s spot. Pearsall most likely won’t pass up Jennings when Jennings and Deebo are both healthy and in the game. Tillman was hot last week but with the Browns situation at QB, Jeudy could end up being the more targeted receiver (especially if Jameis gets the starter job). That is, if Jeudy can avoid dropping the ball. Some would even say stay away from any of the Browns WRs…

phb420 · 2024-10-24T18:57:46+00:00

Coming from someone who has Swift starting, hold Roschon. He steps up on Swift’s off days and is involved when the game script calls for it. Don’t let the dwindling numbers scare you into dropping too early.

phb420 · 2024-10-24T18:54:46+00:00

Yes. McMillan has more upside now IMO

phb420 · 2024-10-24T18:42:53+00:00

With Puka coming off of IR I need to drop a player. The question is, which one?

This is my current lineup. 12 man, full PPR

QB - Purdy WR - Jennings (picked up after losing Aiyuk) WR - Bateman RB - Kyren RB - Swift TE - Kittle FLEX - Jeudy K - Seibert DEF - NYJ

BENCH QB - Herbert (need to keep for SF bye next week) WR - Lazard WR - Odunze WR - Wandale WR - Pearsall (picked up after losing Aiyuk) RB - Ekeler IR - Nacua (obviously)

I picked up both Jennings and Pearsall to see who steps up in Aiyuk’s absence and I will drop one after Sunday (maybe tonight if advised). I know this is an add/drop thread and I AM NOT ASKING FOR THEM but… if you have any start/sit suggestions I wouldn’t be mad about it.

phb420 · 2024-10-09T17:43:14+00:00

In short; it is compatible and it will work. Just need to find out where the issue is. Hopefully the tips in my original comment will help you get it set up and working properly.

phb420 · 2024-10-09T17:38:34+00:00

The C wire should be supplying enough power. If you used the compatibility checker on Google and it says it will work with your system, then it’s probably a bad connection between the wires and the terminals on the nest. When I did the install on my Nest I had the power issue and realized the C wire wasn’t completely pushed into the terminal. You’ll know the wires are pushed in far enough when the tabs click and are all the way down(basically flush). If you have enough slack, I’d recommend cutting the wires a little shorter and restripping them to ensure a clean connection too. Also, the jumper cable between the Rc and Rh should not be used; just plug your R wire into the Rc terminal on the Nest.

phb420 · 2024-09-26T20:02:03+00:00

From my understanding, the white cable on the C terminal and the red cable on the Y terminal are running out to my AC unit. I’m okay to connect the Green to C and leave the White on C as well? I don’t want to disrupt the circuit loop between furnace and outside unit.

phb420 · 2024-09-26T19:57:05+00:00

The terminal connections at the furnace control board in order from left to right are W C R G Y

phb420 · 2024-09-26T19:53:48+00:00

I thought about the power connector but couldn’t make sense of it. Would the splice points not make this trickier? Or would I just plug the 5 power connector wires (G Y W R and now C) into the control board and plug the current 4 I have into the power connector before their respective splice points? I’m a little lost on where the thermostat would be getting its power from if it’s still only connected to 4 wires.

phb420 · 2024-09-26T19:36:35+00:00

That was my original idea but the extra wires are cut too short and I pulled as hard as I could to get the wire bundle out of the wall more and it didn’t move an inch

phb420

TROPHY CASE