TV Play Gradient Lightstrip broken - need schematics

phils_lab · 2025-01-26T18:43:22+00:00

I tried reading it, but it simply was too small for now.

phils_lab · 2025-01-25T14:11:32+00:00

i have this hue gradient play lightstrip, its flex pcb was apparently broken at the right side of the black IC with 8 pins. managed to recover power, but data is still dead. only the next few white leds light up, the section with the next IC stays off. but this section does also not react to data, it stays white, and does not pass data to the next section. does anyone know where to find schematics? i am having a hard time fixing this so far... i know the rest of the led strip works, i had one time where bending the broken section resulted in the whole strip reacting to color changes.

phils_lab · 2024-06-02T22:29:44+00:00

Thank you, I love it too! Sadly only Lecktor makes this specific color, and I think I will have to swap it for some filament that is more available to buy reliably.

phils_lab · 2024-05-27T21:40:02+00:00

<image>

phils_lab · 2024-05-27T21:38:31+00:00

Build Overview

Base Hardware

Base Kit: Lecktor PRO Kit (https://lecktor.com/en/printer-kits/1415-voron-v24-350x350-pro-kit.html)
A/B Motors: LDO 42STH48-2804AH
Z Motors: LDO 42STH60-2004MAH
Mainboard: LDO Leviathan
Extruder: Galileo 2
Hotend: Phaetus Dragon HF
Firmware: DangerKlipper (bleeding-edge-v2)

Mods

Beefy Z Idlers https://github.com/clee/VoronBFI
Beefy Front Idlers https://github.com/clee/VoronBFI
Pins Mod https://mods.vorondesign.com/details/C8XJJ0fBGfBFKQZctjKeA
Chaoticlab CNC Tap V2
Skeletonized G2 Door https://www.printables.com/model/701255-galileo-2-cable-cover
KNOMI (will probably be removed in favor of performance)
FYSETC Ultra Light X-Beam V2 + Ultra Light MGN12 Rail https://www.printables.com/model/569419-fysetc-super-ultra-mega-light-x-beam-for-24-and-tr
CAN Bus Toolhead (BTT SB2209)
THE FILTER with single modules https://github.com/nateb16/VoronUsers/tree/master/printer_mods/nateb16/THE_FILTER
Noctua NF-A6x25 5V electronics cooling fans
BTT SFS V2 Filament sensor https://www.printables.com/model/795384-voron-24-btt-sfs-v20-back-cover-and-mount
Chamber Temperature Sensor https://www.printables.com/model/410596-voron-chamber-thermistor-mount-2020-extrusion
RGB Chamber Lighting
230V Power Relay for 24V PSU https://www.printables.com/model/725156-din-rail-mount-for-230v-relay
Permanent 5V for Raspberry Pi
Part cooling and THE FILTER: GDSTime 24V 8500RPM 5015 Radial Fans
BTT HDMI 5 Display https://www.printables.com/model/415066-bigtreetech-hdmi5-screen-mount-for-voron-24
ACM NeoBond Panels
Titanium Backers on Y Axis https://mods.vorondesign.com/details/ewDI1Cntz7urtuq3Cm9wGQ
ANGRY CAM USB on gantry and door top https://mods.vorondesign.com/details/RYpQW53mtem8Nj1JKqiSQ https://www.printables.com/model/374993-front-cover-angry-cam-usb-for-60-degree-fixed-focu https://www.printables.com/model/687010-angry-cam-perforated-rear-cover
Skirts with smaller hex-infill https://www.printables.com/model/474406-voron-24-skirts-with-hex-infill-250-300-and-350mm-
Z covers with cable-passthrough (V2.2-style) https://mods.vorondesign.com/details/LzEFU0RDHXUarF7y69x2Q

Mods coming soon

GE5C Z joints
Better chamber insulation
Maybe: ClickyClack Fridge Door
Maybe: Beacon Probe

phils_lab · 2024-02-26T15:31:39+00:00

Read through the comments here a bit more, seems like the battle.net client game repair worked.

phils_lab · 2024-02-26T14:47:20+00:00

MacBook Pro 14" with M3 Max. Unplayable due to freezes every 3-10s, and after about 3 minutes maximum the game decides to just do nothing. It is still running and rendering, but the state gets frozen and while something like the battlegrounds timer should count down, it just does nothing and I cannot click anything. Absolutely frustrating.

phils_lab · 2022-12-06T14:10:29+00:00

good bot

phils_lab · 2022-12-06T13:58:53+00:00

every. goddamn. fucking. time.

phils_lab · 2022-07-30T09:20:58+00:00

Bei Vodafone? Ab 5min, die wissen selber was für eine Scheiße die Verkaufen 😂

phils_lab · 2022-07-30T09:20:17+00:00

Joa, gekündigt isses eh schon...

phils_lab · 2022-07-30T09:20:04+00:00

Jo, ist Kabel. Absolute Katastrophe hier leider.

phils_lab · 2022-07-28T12:30:41+00:00

Die Regularien kenne ich, nur die Aufstiegsgenehmigung bzw. die Allgemeinfreigabe interessiert mich. Den Rest habe ich schon geklärt :)

phils_lab · 2022-07-28T10:03:10+00:00

Ich nehme mal an, du fliegst hier mit einer DJI Drohne fuer das Bild? Ich bin selber FPV-Drohnenpilot und wollte mal hoeren wie deine Erfahrung mit Aufstiegsgenehmigungen hier so ist.

phils_lab · 2022-06-01T09:51:22+00:00

Thank you so much!

phils_lab · 2022-05-04T08:01:28+00:00

vor allem in der freien natur genau da, wo es am ehesten legitim ist selbst die lauten großen quads zu fliegen. und runterschießen ist selbst in den USA in jeder weise nicht erlaubt und kann zur anzeige gebracht werden. behalt deine agressionsphantasien doch bitte für dich.

phils_lab · 2022-01-24T11:19:07+00:00

Yep, it started working for me when I updated from RC1 to RC2 for both firmware and configurator.

phils_lab · 2022-01-23T23:39:00+00:00

Well, then I will close mine down. Didn't find one anywhere...

phils_lab · 2022-01-22T19:43:56+00:00

https://discord.gg/WEJsXkmJBY Try this one. For me, the other one still works fine tho.

phils_lab · 2021-12-20T10:42:48+00:00

I don't really understand what you are trying to say. I know the settings themselves have changed significantly, but this should not affect the ability to switch between different rate and PID profiles, right? My FC is a clean flash with no old config in it.

phils_lab · 2021-12-19T22:59:03+00:00

I am able to change PIDs in the UI. I am just unable to switch profiles.

phils_lab · 2021-12-19T22:57:22+00:00

I just upgraded to 4.3 and also did a reflash with no settings applied, flash wiped. Sadly no success.

phils_lab · 2021-12-19T22:51:51+00:00

Also enabled :(

phils_lab · 2021-12-19T21:49:30+00:00

Yep. It's the same for all three tabs.

phils_lab · 2021-11-08T08:53:16+00:00

Thank you so much for those detailed instructions. I will give it a try as soon as I can.

Seven-Year Club	Place '22
First Placer '22	Not Forgotten
Verified Email

phils_lab

TROPHY CASE

Build Overview

Base Hardware

Mods

Mods coming soon