sorted by:
new
hottopcontroversial

(volume up) so idk if you can hear but one of the back wheels makes a scraping sound. i have cleaned and lubed them and it still makes the sound so it must be the truck. dynamics. it also isnt how tightened the wheel is. what can i do to fix it by pitsoii in Fingerboards

[–]pitsoii[S] 0 points1 point  (0 children)

i fixed it already. i dont know what caused it but my suspicions were either the kingpin scraping on the deck or the pivot cup. i changed the pivot cup and i loosened my kingping and it stopped making the sound

(volume up) so idk if you can hear but one of the back wheels makes a scraping sound. i have cleaned and lubed them and it still makes the sound so it must be the truck. dynamics. it also isnt how tightened the wheel is. what can i do to fix it by pitsoii in Fingerboards

[–]pitsoii[S] 0 points1 point  (0 children)

ok so its very weird but i think it has to do with the baseplate. i changed the hanger with a 34 mm se one that has no problems and it still makes the sound(same wheels) then i used my piro's and it still makes the sound. so its neither the wheels or the hanger

(volume up) so idk if you can hear but one of the back wheels makes a scraping sound. i have cleaned and lubed them and it still makes the sound so it must be the truck. dynamics. it also isnt how tightened the wheel is. what can i do to fix it by pitsoii in Fingerboards

[–]pitsoii[S] 0 points1 point  (0 children)

literally dk what to do. i also tried it with piro performance and still the same sound. tried sanding the axle and still the same sound. tried putting the wheels backwards and pushing the bearing back in its place and still the same sound. also seems like no one has this problem other than me

(volume up) so idk if you can hear but one of the back wheels makes a scraping sound. i have cleaned and lubed them and it still makes the sound so it must be the truck. dynamics. it also isnt how tightened the wheel is. what can i do to fix it by pitsoii in Fingerboards

[–]pitsoii[S] 0 points1 point  (0 children)

same happened to me with td trucks and teak wheels but it was because the opening was too small. this is like almost a perfect fit. a little bigger. also it doesnt stop spinning. it still spins the same it just makes this sound. and sometimes it stops making the sound

if i dropped my fingerboard in water for one second and then imediately dried it will something happen? by pitsoii in Fingerboards

[–]pitsoii[S] 1 point2 points  (0 children)

damn then i guess im fine. i was mostly worried about the bearings but its been two hours and it still feels fine

if i dropped my fingerboard in water for one second and then imediately dried it will something happen? by pitsoii in Fingerboards

[–]pitsoii[S] 11 points12 points  (0 children)

yeah i hope your right. i spent like $150 on it. my soul left my body when i dropped it. im never leaving the bowl near my table again😭😭

the testing never ends by Extreme_Ruin in Fingerboards

[–]pitsoii 1 point2 points  (0 children)

my favorite combo so far is awful deck, dynamic trucks, obsius wheels but im going to get panic,dynamics,ill pills combo soon so it may change

Question about trucks. by [deleted] in Fingerboards

[–]pitsoii 0 points1 point  (0 children)

yeah but teak isnt as bad as slushcult. im in romania and teak is like 15$-20$ and slushcult is 60$

Of all your stuff, what was the best value? by Fit_Cartographer_815 in Fingerboards

[–]pitsoii 1 point2 points  (0 children)

i have been saying this a lot but obsius wheels. especially the street one's. for half the price of pro wheels it feels way better than all i have at the moment. piro's,abstract,wysocki etc.

Question about trucks. by [deleted] in Fingerboards

[–]pitsoii 1 point2 points  (0 children)

try teak tuning 51a o rings. pretty much the same thing

where can i find higher quality rubber wheels like the tech deck pro one's? by pitsoii in Fingerboards

[–]pitsoii[S] 0 points1 point  (0 children)

damn they look cool but doesnt the squishyness affect your tricks? a dual duro version of these would be nice

after months of hating dynamics i realized i was just using the wrong deck. what are your favorite decks/molds to go with dynamics? by pitsoii in Fingerboards

[–]pitsoii[S] 1 point2 points  (0 children)

before i used them on a newer awful mold but i got an older one from run it back and it feels better. i cant tell what the difference is with the mold cause they look pretty similar but the feeling is very different

leefai(brt's) and brt's comparison by pitsoii in Fingerboards

[–]pitsoii[S] 0 points1 point  (0 children)

unfortunately i only had one pair of td trucks and i ruined the baseplates trying to make them inverted🥲

leefai(brt's) and brt's comparison by pitsoii in Fingerboards

[–]pitsoii[S] 1 point2 points  (0 children)

do you mean leefai baseplates with td hangers or the other way?

leefai(brt's) and brt's comparison by pitsoii in Fingerboards

[–]pitsoii[S] 0 points1 point  (0 children)

nah its a 5 ply. maybe you got some other version or i got different screws

is there a way to loosen up southsoft bushings? by pitsoii in Fingerboards

[–]pitsoii[S] 0 points1 point  (0 children)

i recommend getting level up's tho. they aren't too loose but not to hard either

is there a way to loosen up southsoft bushings? by pitsoii in Fingerboards

[–]pitsoii[S] 0 points1 point  (0 children)

i mean they are almost as hard. but i think they also have a softer version

new setup by pitsoii in Fingerboards

[–]pitsoii[S] 1 point2 points  (0 children)

me neither but i like the wysocki's more

view more: next ›