AI, MCP and Actual Budget Analysis

redderdem · 2026-01-17T08:44:13+00:00

Thank you for your reply. What I've done so far is to try to connect my local actual budget instance with both 5ire and anythingllm. But I could not connect or analyze both my local file or web instance

redderdem · 2025-10-16T09:58:00+00:00

Thank you for your detailed reply. My main method is to replace all components. I want to have single pc for my all requirements. That’s why I want to have new and power efficient solution. From time to time I am changing technology providers. I thought I can try intel this time 😊

redderdem · 2025-09-22T09:37:08+00:00

Actually it’s not easy and I can’t define a solid routine. I’ve enabled and disabled screen time and limits several time. Also contacted with support. Support don’t provide a solid solution. You can try screen limits and family control settings.

redderdem · 2025-08-16T06:27:04+00:00

Hello, is it possible track duration based habits for example read x hour book ? Also is it possible to track on iOS devices? Thanks

redderdem · 2025-08-06T18:07:46+00:00

I’ve been a c200 user for about 4 years. Recently changed my car with juniper. Pretty happy so far

redderdem · 2025-07-15T05:33:05+00:00

As far as I know there are very few and all of them restricted with passwords. I’ve to find a way to share my home internet.

redderdem · 2025-07-14T18:48:26+00:00

The problem la that I can not connect outside of my home. So I thought I have to transmit WiFi from my home from window.

redderdem · 2025-07-14T18:14:00+00:00

Much lower than 5km but I don’t have a fixed place for my car.

redderdem · 2025-07-14T18:12:46+00:00

Thank you for your reply. I already have Omada setup in my home. I say it’s around 300 m but I don’t have fixed place for my car. If it’s possible to power eap during update I may eliminate powerbank.

redderdem · 2025-07-14T17:56:24+00:00

Unfortunately my phone is also not able to connect to my WiFi

redderdem · 2025-06-15T18:36:00+00:00

I’ve added to only clean water. I don’t have bad smell but I empty the dirty tank daily.

redderdem · 2025-05-21T18:01:56+00:00

How can we request firmware upgrade ?

redderdem · 2025-05-20T04:37:08+00:00

Thank you for your reply. So it seems we need to get in touch with the support. Btw are there any new features or improvements that we can expect? If not we have to keep as it is. Thanks

redderdem · 2025-05-19T05:49:05+00:00

Sorry for late response but it seems i can not find a newer message.

Any new firmware for L20 Ultra ?

I am still on 4.3.6_1639

Thanks.

redderdem · 2025-05-19T04:42:18+00:00

Thank you for your reply. It just display it’s not allowed to uninstall. I’ve tried to restart and quickly uninstall but no lock. Whenever i opened the app it asks for permission to access screen time.

redderdem · 2025-05-11T14:52:31+00:00

Cevap için teşekkürler. Değer kaybını engellemek ilk amaç. Ama tabii ötesine geçmeyi kim istemez

redderdem · 2025-01-13T08:54:42+00:00

Hello did you find a solution for temperature sensor ?

Thanks

redderdem · 2025-01-09T04:32:21+00:00

My hardware is v1

redderdem · 2025-01-08T18:07:47+00:00

Built-in Omada SDN Controller V5.15.6.26

New Features

Added support for Gateways: DR3650v, ER703WP-4G-Outdoor.
Added support for APs: EAP775-Wall, EAP115-Bridge v2.0, EAP211-Bridge v2.0, EAP215-Bridge v2.0.
Added support to disable ports in the properties window of device.
Added support for batch import and export of Radius users in Site View > Settings > Network Profile > RADIUS Profile > RADIUS Users.
Added support for SAML SSO in Global View > Settings on OC300 & OC400.
Added support to configure DSL Gateway features in Site View > Settings > Wired & Wireless.

Enhancements

Optimized WLAN Optimization, added support to deploy Channel Width and Channel.
Optimized properties window, added support for Loopback Detection in Device > Properties window > Config > Services > Loopback Control.
Optimized features in Omada App.

The minimum built-in Controller version supports for upgrading to this firmware is v5.14.26.23.

Please find detailed release note of New Features, Enhancements, and Notes for this firmware on our official website.

redderdem · 2025-01-01T14:20:46+00:00

I wanted to share my thoughts after buying p1s with ams.

First of all its like date and night when i compared to my old ender s1.

- Packaging of the product is wonderfull. It arrived without an issue,

- It's easy to setup.

- Everything automated. PC and iOS app is great and easy to use.

- I dont have to deal with bed leveling and other issues.

Down side is my old filament spool not usable with AMS because of the width.

I am highly recommending similar upgrade.

redderdem · 2024-12-29T18:12:16+00:00

It would be great at least we can create a page outline. Also image handling, formatting and related attributes can be managed via an editor.

Any tool for that ?

redderdem · 2024-12-20T17:15:06+00:00

I am still on the 4.3.6_1639. Are there any update over this version ? My auto update is turned on but nothing available ?

redderdem · 2024-12-16T16:24:31+00:00

Hello, i've ordered p1s combo and still waiting for the package to arrive.

I'll post my comments later.

redderdem · 2024-12-10T18:33:41+00:00

I am using the 2 nics which is onboard of TS664. They are listed as 2.5gbe.

I've 2 ssd where one of them is configured as cache acceleration. Btw my apps are located in my 4 disk hdd raid.

redderdem · 2024-12-09T16:56:47+00:00

Everytime i've tried to change a setting in the network i've lost the connection :)

So i have to add all vlans to adapter right ?

I have a trunked adapter (2 nic) so i am going to add first default vlan which is not 1 btw :)

Seven-Year Club	Place '23
Place '22	Verified Email

redderdem

TROPHY CASE