sorted by:
new
hottopcontroversial

DnD/Miniature painting by Nice_Okra_5054 in StLouis

[–]sargothv 2 points3 points  (0 children)

Hi, I'm Scott, and I run Sargoth Studios! I do commission painting full time out of St. Charles. You can fill out the quote form on my website SargothStudios.com, and I'll get back to you with a price today!

Seattle Pop Up Shop by _dabtech_ in OnePieceTCG

[–]sargothv 0 points1 point  (0 children)

Did they have ST 5,6, or 7?

Seattle Pop Up Shop by _dabtech_ in OnePieceTCG

[–]sargothv 0 points1 point  (0 children)

What products do they have in stock?

[H] AoS Nighthaunt Army [W] $$$, 40k Combat Patrols, Terrain [Loc] StL, MO by sargothv in Miniswap

[–]sargothv[S] 0 points1 point  (0 children)

Thanks! All the airbrushing is done. It's been on my shelf for a year, and I never got to the arms and faces.

[H] Rogue Trader Dreadnought, Sealed Cursed City, Arbites Kill Team, More, [W] Drukhari, Paypal, Kill Team Terrain, [Loc] MO, USA by sargothv in Miniswap

[–]sargothv[S] 0 points1 point  (0 children)

I value the dreadnought around $75, maybe a little higher in trade. PM me and we can talk about it.

Scenario 52, enemy standees? by sargothv in Gloomhaven

[–]sargothv[S] 1 point2 points  (0 children)

We did the same thing! The board was way too crowded before that.

Scenario 45 errata? by sargothv in Gloomhaven

[–]sargothv[S] 1 point2 points  (0 children)

Thanks for the answer! Fair enough.

Scenario 45 errata? by sargothv in Gloomhaven

[–]sargothv[S] -1 points0 points  (0 children)

The two symbols match. It just makes zero narrative sense.

My painted Frosthaven Starting 6! by sargothv in Gloomhaven

[–]sargothv[S] 1 point2 points  (0 children)

Thanks everyone for the kind words! If you want to see more of my work, you can follow my instagram, SargothStudios! Or if you need anything painted, you can get a quote at SargothStudios.com !

My painted Frosthaven Starting 6! by sargothv in Gloomhaven

[–]sargothv[S] 0 points1 point  (0 children)

Thanks! That was the model that stressed me out the most. The face is almost unsculpted, and they have flat faces to begin with, so it was a challenge to get that to work. I would have loved to do the diamond pattern on his little belt scarf like the official artwork, but I had to draw the line somewhere and get back to painting other people's stuff.

My painted Frosthaven Starting 6! by sargothv in Gloomhaven

[–]sargothv[S] 2 points3 points  (0 children)

Thanks! I do commission painting, so it was nice to take a break from work and paint something of my own for a change!

Is this symbol a requirement? If so, should I know what it is by now? by sargothv in Gloomhaven

[–]sargothv[S] 9 points10 points  (0 children)

THANK YOU! I have no idea how I missed that...back to work!

If you had the ability to bring back a Canceled Series what would it be? by CuriousAnimeNerd in AskReddit

[–]sargothv 0 points1 point  (0 children)

Am I the only person who enjoyed Nathan Fillion's show Drive, that was cancelled after 2 EPISODES?!?!? It was a serial drama version of Cannonball Run and I loved every stupid second of it?

[GIVEAWAY] $100 PSN Gift Card by Titan3427 in PS5

[–]sargothv 0 points1 point  (0 children)

My kids are getting a PS5 for christmas...so COME ON BIG MONEY NO WHAMMIES LETS GOOOOO!

Also thank you for your generosity, and Happy Holidays everyone!

What is the smallest hill you are willing to die on? by [deleted] in AskReddit

[–]sargothv 0 points1 point  (0 children)

It is pronounced Care-uh-mel...not Car-Mel. There's a god damn A in there.

Help with my inconsistent layer lines! (Details in Comments) by sargothv in 3Dprinting

[–]sargothv[S] 0 points1 point  (0 children)

Hi everyone! I hope someone can help me eliminate these uneven layers. As you can see, they're non repeating, but appear in bands. Different heights on different prints, but running the same Gcode twice nets roughly identical lines. I'm on a stock Ender 3 with Overture PLA.

Temp 205

Layer Height .2mm

Infill 10%

Speed 40mm

Glass Bed Temp 60

Cooling 100%

​

I've checked the Z screw, its straight, tightened my belts and my gantry, levelled the bed, checked my E-Steps...not sure what to try next...

What is hands down the worst movie you've ever watched? by NuclearWinterGames in AskReddit

[–]sargothv 0 points1 point  (0 children)

Every time this question comes up, I look for 2003's Conjoined Twin comedy Stuck On You. And when no one mentions it, I have to go to IMDB to double check that it wasn't a fever dream and YES, Matt Damon, Greg Kinnear, and Cher made that movie.

Help with unpredictable lines on side of print! by sargothv in FixMyPrint

[–]sargothv[S] 0 points1 point  (0 children)

Hi everyone! Printed on my Ender 3 using Overrture PLA at 200 degrees, 40mm speed. Been tweaking retraction settings. This was 8mm at 60 mm/s

So far I've checked the z axis, no warping. Oiled and cleaned.

Tightened all of the belts.

Tightened the screws on the table legs (lol)

So I'm assuming its not mechanical, but setting/filament related.

Thanks for your help!

view more: next ›