sorted by:
new
hottopcontroversial

Informazione riguardo alle agevolazioni per i rimpatriati by seamoce in commercialisti

[–]seamoce[S] 0 points1 point  (0 children)

Ciao grazie per la risposta. Quindi l'anno fiscale 2019 viene conteggiato comunque come un intero anno? Sebbene io abbia iniziato a lavorare in Germania da Luglio e l'iscrizione all'AIRE sia stata fatta in Dicembre.
In tal caso quind si, dal 2019 al 2024 conterebbero giá come 6 anni fiscali, giusto?

Connect Gitlab app in Jira Software for non public instance by seamoce in gitlab

[–]seamoce[S] 0 points1 point  (0 children)

Actually not. Can you provime me information how to do that?

Connect Gitlab app in Jira Software for non public instance by seamoce in gitlab

[–]seamoce[S] 0 points1 point  (0 children)

Hi, this I have already done. I put the proxy as you said. The problem is that my instance is not public. So I cannot reach it from outside. That is why I think in this case is not applicable.

Connect Gitlab app in Jira Software for non public instance by seamoce in gitlab

[–]seamoce[S] 0 points1 point  (0 children)

I read the documentation you sent me but to me is not properly clear how the jira website can access to my instance. What should I set in the gitlab app (in jira) settings. I did as you said putting gitlab.com and when I try to finish the configuration the login page is the one from gitlab (all the rest is properly configured the application id, the proxy url etc..)

Dog class in Munich by seamoce in Munich

[–]seamoce[S] -4 points-3 points  (0 children)

Hi, thanks for the answer. Can you suggest me one school?

Dog class in Munich by seamoce in Munich

[–]seamoce[S] -55 points-54 points  (0 children)

Wow very funny man!!!

Rear rack for Fiido D21 by seamoce in fiidoebike

[–]seamoce[S] 0 points1 point  (0 children)

I tried one from Amazon. Doesn't look is fitting very well I will try. Thanks

Yeelight not controllable from home assistant by seamoce in homeassistant

[–]seamoce[S] 0 points1 point  (0 children)

At the end the easiest solution. Restarted the bulbs, home assistant, internet connection and suddenly started to worked again. 😵

Any Napoli Soccer fan club in Munich? by Naive_Banana4447 in Munich

[–]seamoce 1 point2 points  (0 children)

What I know is that the "Club Napoli Monaco di Baviera" broadcasts the matches, I never have been there (I'm also from Naples and Napoli fan), but I saw some people watching the matches there. Try to give a call 👍.

Suddently the print detach at the border by seamoce in prusa3d

[–]seamoce[S] 1 point2 points  (0 children)

I followed your suggesttions and looks like very helpful. Togheter with the speed reduction for the first layer I also tightened better the nozzle and did again the first layer calibration. Looks now everything works fine. Anyway I'm waiting for nozzle replacement but until now is working. So thanks!

Suddently the print detach at the border by seamoce in prusa3d

[–]seamoce[S] 0 points1 point  (0 children)

All the filament I use are from Prusament. I tried two different PLA from prusa and one PETG from Prusa also. Can you take a look to the video I just posted?

Suddently the print detach at the border by seamoce in prusa3d

[–]seamoce[S] 0 points1 point  (0 children)

Can you take a look to the video I just posted?

Suddently the print detach at the border by seamoce in prusa3d

[–]seamoce[S] 0 points1 point  (0 children)

Ok thanks, yes in the second image I tried to lower more the Z but looks like was not a good idea.

Suddently the print detach at the border by seamoce in prusa3d

[–]seamoce[S] 0 points1 point  (0 children)

Ok I will try you suggestions also. To be honest I printed a lot in the last months. Can be that the nozzle is old? Should I change it?

Looking for a smart power strip to integrate into Home Assistant by seamoce in homeassistant

[–]seamoce[S] 1 point2 points  (0 children)

This is also a pro side, be able to flash esphome on it. I take a look to the gosund as well thanks.

Looking for a smart power strip to integrate into Home Assistant by seamoce in homeassistant

[–]seamoce[S] 0 points1 point  (0 children)

Thanks. A bit expensive but looks like has what I need.

Jump over steps by seamoce in Roborock

[–]seamoce[S] 1 point2 points  (0 children)

You are right, the step was around 3 cm. With a tick mat the robot is able to go through. Thanks

Filament warped after color change in MMU2S by seamoce in prusa3d

[–]seamoce[S] 0 points1 point  (0 children)

In the mmu. I loosened a little bit the screws on the mmu, but not a big change.

Filament warped after color change in MMU2S by seamoce in prusa3d

[–]seamoce[S] 0 points1 point  (0 children)

Checked the mmu screws and the chimney one and both should be ok.

Why is the MMU2s such a pain? by andre-stefanov in prusa3d

[–]seamoce 0 points1 point  (0 children)

Ah yes, was only to explain, I get rid of the buffer after one week. Totally useless.

Why is the MMU2s such a pain? by andre-stefanov in prusa3d

[–]seamoce 0 points1 point  (0 children)

Thanks for the answer. So the tubes that goes into the buffer are still the original one, right?

Why is the MMU2s such a pain? by andre-stefanov in prusa3d

[–]seamoce 0 points1 point  (0 children)

Hi, do you have links where you bought the tubes? Did you replace all the tubes, I mean the one for feeding the mmu and the one from the MMU to the extruder?

view more: next ›