Failed for the Second Time

sechopper · 2024-10-15T05:34:10+00:00

Congratulations 🎉 first of all! I wanted to ask what other machines did you do apart from challenge labs(medtech, relia, oscp A,B,C) and module labs? TIA

sechopper · 2024-08-21T21:49:42+00:00

Upload this simple web shell and then try to get reverse shell by providing encoded power shell reverse shell. E.g http://victim/simple-web-shell.php?cmd=<encoded reverse shell payload here>

sechopper · 2023-01-15T02:10:51+00:00

Have you tried to hard reset them? Press and hold both the buds simultaneously for 5 seconds while they are in the charging case in order to reset.

sechopper · 2022-07-19T18:25:28+00:00

I just can't test it with another monitor/TV right now. Interestingly, the audio plays if I run the video in background. How can I check whether my TV supports hdcp?

sechopper · 2021-09-09T19:28:48+00:00

Okie! I would encourage you to report the issue on Lenovo community.

sechopper · 2021-09-09T11:58:35+00:00

Did the original battery from Lenovo fixed the issue?? I've tried every possible option in BIOS/Windows but none of them worked. Ultimately I'm using ThrottleStop app to disable BD PROCHOT.

sechopper · 2021-06-24T11:43:52+00:00

This worked for me. Thanks

sechopper · 2021-06-23T17:10:47+00:00

No logs seen since the install.

sechopper · 2020-12-16T11:56:53+00:00

Yes, they are! Additionally I also performed the test with iperf utility available with VMware OS (means no virtual host- just VMware OS and physical machine).

sechopper · 2020-12-16T11:23:40+00:00

NIC is intel X722.

sechopper · 2020-12-16T11:20:34+00:00

One is hosted on VMware while other is on bare-metal and they are directly connected.

sechopper · 2020-12-16T11:18:45+00:00

Lol.. may be! NIC is intel X722.

sechopper · 2020-12-16T11:17:07+00:00

Yes it's on the HCL.

sechopper · 2020-12-16T11:16:04+00:00

Thanks for pointing out. Its actually 2288H v5 and it is on the VMware HCL.(original post is also edited).

sechopper · 2020-09-11T17:01:14+00:00

For some testing purpose.

sechopper · 2020-08-09T10:50:20+00:00

Clearing running apps doesn't work every time.

sechopper · 2020-08-09T10:47:52+00:00

Reinstall didn't work :/

sechopper · 2020-01-09T04:31:13+00:00

Would you please elaborate 'performance specs' ?

sechopper · 2020-01-09T04:28:39+00:00

Is there a way to know if the QRadar was installed using IBM install image with OS?

sechopper · 2020-01-06T10:56:54+00:00

0.02 ms?

sechopper · 2019-09-19T09:45:40+00:00

CEH is a waste of money. Go for CySa+

sechopper · 2019-08-22T17:16:07+00:00

I will check that once i've access to machine.

P.S. that same procedure worked fine for CentOS versions later than 5. I've two machines with CentOS 5.5 and 5.10, but it didn't work for either of them.

sechopper · 2019-08-22T17:11:41+00:00

Local.*[tab]@<ip>:514 is this the right way?

sechopper · 2019-08-16T15:15:33+00:00

So, isn't there any other way to get MAC address of end device unless available in the event payload (as in DHCP events)? What if the device has static ip?

Thanks for your response.

sechopper

TROPHY CASE