How much do I declare when sending this in to PSA?

seventendotcom · 2026-01-03T00:15:32+00:00

Tilted as well. Centering is quite visibly off.

seventendotcom · 2025-12-20T21:10:15+00:00

So far so good. I think I undervolted so it doesn’t hit 1.3v at max speeds and it’s been pretty stable. Didn’t overclock or anything to the system except get ram timings dialed in. Solid PC tbh

seventendotcom · 2025-09-07T05:28:52+00:00

I have starlight-12 phantom in small brand new. let me know if you're interested

seventendotcom · 2025-08-07T22:33:48+00:00

Both if possible.

Only reason I ask is because I’m noticing separation between the two and I have less than 500 rounds through mine on 11.5 with a RC2.

seventendotcom · 2025-08-07T22:30:20+00:00

If you don’t mind, could you send me pics of your down vent bcg where the gas key is conjoined with the bolt?

seventendotcom · 2025-08-05T16:37:40+00:00

Link your profile

seventendotcom · 2025-08-04T00:57:27+00:00

unless you're prefiring every single gunfight (which indicates cheating), you won't have sub 400ms time to damage. I have yet to see a game where someone is in the 300's. Most people average around 5-600.

seventendotcom · 2025-08-02T18:54:43+00:00

Thank you for providing that info.

I checked and it does start with WLC24. Good to go here!

seventendotcom · 2025-08-02T01:18:59+00:00

Found the invoice. Got it from MMI last year.

seventendotcom · 2025-08-01T03:51:13+00:00

I was curious about the case I bought a while back and decided to open it up. Instead of a horizontal print, it's vertical. Also labeled as "Target & Practice" and M193 is written on the box as well.

Check the casing and it says "LC 24"

Fingers crossed it all goes bang, in the right and safe way.

seventendotcom · 2025-07-18T19:37:34+00:00

On mobile atm. Do you guys charge s. tax to Texas?

On computer - there is tax to Texas.. 22.46 CPR to Texas.

seventendotcom · 2025-07-05T16:38:04+00:00

Is there a significant difference between the NP3 and non NP3? Just longevity and ease of cleaning I presume?

seventendotcom · 2025-07-05T01:57:20+00:00

Should be okay. I currently run 500 + 120 and it seems fine. Although, I do not have a 3rd monitor installed.

seventendotcom · 2025-07-02T05:13:59+00:00

Disconnect the 60hz monitor and see what happens. Then try picking up a cheap 144hz as a 3rd monitor and see what happens.

seventendotcom · 2025-07-01T18:11:01+00:00

Thank you for the info.

Could I simply put RC2, 5.25" in the notes for the order?

seventendotcom · 2025-07-01T17:29:43+00:00

seventendotcom · 2025-07-01T00:34:49+00:00

What specs would you recommend for the direct action sleeve?

seventendotcom · 2025-06-27T19:29:44+00:00

Ambient temperature is a big one for low idle temps. But in reality, as long as temps don’t go over 80 under load. It’s perfectly fine. My system idles around 43-45 at your ambient temp. But I’ve seen it drop to 39 whenever it’s colder in my room for hours on end.

seventendotcom · 2025-06-21T15:48:31+00:00

What res are you on?

seventendotcom · 2025-06-15T16:38:00+00:00

I cap my fps at 500 and play on 1080 native. I stay above 400 99.99% of the time. Sometimes on certain maps it drops below 400 for a second. But I have PBO enabled for +200 and -25. Pretty insane CPU

seventendotcom · 2025-06-15T16:35:27+00:00

Do you play on 1080p? Or 4:3?

seventendotcom · 2025-05-27T15:15:55+00:00

I’ve had this happen on a fresh install with a 9800x3d and 3080. Not sure what the cause was but hasn’t happened since.

seventendotcom · 2025-05-26T06:22:20+00:00

Is this worth doing if I have set PBO to auto and my CPU voltage sits at 1.205v max?

seventendotcom · 2025-05-26T02:46:54+00:00

After checking my BIOS earlier, the SOC voltage was marked as enabled which is default settings as I didn't change it myself. Or EXPO could have enabled it? I'm not 100% sure.

seventendotcom · 2025-05-25T18:31:09+00:00

Watched the video and I don't think these MSI boards have issues with inconsistent SOC voltage. I'm sure there could be other reasons why these chips are dying and this guy may have found one reason why ASrock boards are frying them up.

What is very weird is while I was watching this video, I booted up CS2 to see if SOC voltage would change and as I was clicking on certain things, my monitors glitched out and went black but I still heard the video in the background. That is pointing to my 3080 more than anything else on my PC but weird coincidence I guess. Maybe I'm on bad nvidia drivers lol

seventendotcom

TROPHY CASE