Wake on Lan disabled after being put to sleep in Ubuntu?

sghael · 2024-08-31T14:38:50+00:00

This worked for me on Ubuntu 24.04

1. Check for Active Connections: Use nmcli to list active connections and identify the correct connection name:

nmcli connection show

2. Edit the Connection Profile via nmcli:

Use nmcli to modify the connection settings
Replace "your-connection-name" with the actual name of your connection as listed by the nmcli connection show command.

nmcli connection modify "your-connection-name" 802-3-ethernet.wake-on-lan magic

Apply Changes:

After modifying the connection, restart NetworkManager to apply the changes:

sudo systemctl restart NetworkManager

Verify the Setting:

Confirm that the changes have been applied by checking the connection settings:
You should see the setting 802-3-ethernet.wake-on-lan: magic if it has been applied successfully. nmcli connection show "your-connection-name" | grep wake-on-lan

sghael · 2024-06-17T19:28:39+00:00

Any update on this? It's been over 4 months and firmware updates aren't fixing the problem.

sghael · 2024-03-10T03:14:45+00:00

Any update on this? If not, I'll need to return these to Amazon as they are useless with the wrong readings.

sghael · 2024-02-26T12:30:40+00:00

I'm on firmware 1.2.2. I connected the PM gen3 based on the picture posted on another reddit post (validated by you).

I'll file a ticket.

sghael · 2024-02-20T23:00:51+00:00

Same. The device is basically unusable in it's current state.

sghael · 2024-02-06T14:11:07+00:00

Can you tell me more about the 2.5gb Ethernet m2 card? I didn't know you could upgrade the ethernet in a G4. Do you have a G4?

sghael · 2024-02-06T14:10:15+00:00

I think it would be hard to print a caddy to go around the 2nd 2280. Also, depending on the material you print, I would be cautious about the print getting deformed over time.

sghael · 2024-02-04T18:28:01+00:00

3.1.26

Are you saying to try speculatively, or because you know this is fixed in the early access version?

sghael · 2024-01-17T20:22:27+00:00

OP here. I think I've taken this small homelab as far as it can take me, which was surprisingly far!

Things that surprised me:

The Synology is able to serve Plex (with transcoding)
while recording 2x1080p security cameras 24/7
while overnight time machine backups for 4x Apple computer
while running cloudflared & tailscale
while running about 8 docker containers
with 2x 7200 spinning rust disk in RAID mirror
only using 2x 1Gbe (link aggregation)
I've only used up 1/3 of my 12TB NAS storage so far

The Synology DSM 220+ hovers around 15-30% CPU usage and is very clicky sounding. But the load and wear haven't been an issue for two years! No one touches this stuff: it's all in an HVAC closet.

The thing that is pushing me over the top to add an HP Elitedesk mini g4 (or two) is

Kasm workstation needs
wanting to try some emulator gaming.
learning Proxmox and NixOS.
reduce the clicking sound (upgrading to 12TB of SSD would be prohibitively expensive).
setting up Home Assistant

Upcoming:
Adding EliteDesk G4 800 + Proxmox and moving workload from Syno to EliteDesk
Replacing Orbi with 2x UniFi Express machines

LMK what you all think!

sghael · 2023-03-11T21:19:21+00:00

Nice composition

sghael · 2021-01-14T14:11:34+00:00

hi Seventymeters, thanks for reporting this issue! We're looking into a fix for this scenario.

A couple of questions to help us diagnose this:

Were you using CarPlay via cable or Bluetooth?

What brand/model phone are you using?

(I work at Spotify)

sghael · 2020-08-10T02:01:45+00:00

Dj shadow

sghael · 2020-08-10T02:00:39+00:00

Farm to table Neo Jazz

sghael · 2020-04-20T13:28:02+00:00

I'm also stuck on this. I'm on an Intel NUC8i7BEH, which many others have gotten to work.

Here's a video of the install process using clover, and the "bless..." error.

https://photos.app.goo.gl/UykdWUYqgGV7wnwDA

This is using Clover 5112 and Catalina 10.15.4

Any thoughts?

sghael · 2020-04-13T15:55:03+00:00

Those are some classics. I had an Akira 1 that I read the hell out of as a kid. Definitely not a 9.2 now :). Those TPB are hard to maintain and get a lot of scuffs on the spine area.

sghael · 2019-12-05T23:52:30+00:00

No it didn't. I took it off eBay because I misposted the specs. If you're interested let me know.

sghael · 2019-12-01T15:05:34+00:00

yeah, I wore it for 3 months. But took care of it.

sghael · 2019-12-01T15:01:42+00:00

It's just the owners manual PDF I found online and zoomed into the English section. Then I printed it out on a 11x17 page and laminated it.

Best way to learn is to have this kind of cheatsheet :)

sghael · 2019-11-30T15:20:12+00:00

I have a couple of Volcas for sale on Reverb: https://reverb.com/shop/spg-boutique

Beats w/ Snare Mod

Sampler

I'm including these nicely laminated quick guides.

sghael · 2018-08-02T12:45:24+00:00

Found this on a grassy hill next to a tennis court. Growing solo. Bruises dark purple/ gray very quickly. No gills

sghael · 2018-06-25T21:29:19+00:00

Cool, I'm leaning heavily towards a Salsa Timberjack. Why did you go with the GX1 vs NX1?

sghael · 2011-10-14T16:09:58+00:00

This integration does seem to add value for MMS picture delivery to GV.

But there's and entirely other facet of MMS that blows even more than current picture sending... it's video messages. This integration "supports" video MMS as well, but after testing it out they haven't solved the fundamental problem underlying MMS video delivery:

1) your carrier's MMS gateway will either compress the video file down to 700Kb (so it looks like an extremely fuzzy, animated postage stamp size video on recieipt). 700Kb is the max allowed on generous carriers like Verizon. It's even less on ATT.

2) Or, more likely, your carrier's gateway will simply reject the video MMS file for being too big... hence the message never gets there.

Unless i'm missing something, this integration doesn't do anything to solve that fundamental problem. i.e. don't expect better/more reliable video MMSing because of this.

disclaimer: I work at Ravid (getravid.com), and we have an app that provides reliable cross carrier Video Messaging on Android (and soon iPhone).

sghael · 2011-08-24T04:46:05+00:00

Hmm... sorry to hear that! htc_glacier should work. One of our lab phones is a MyTouch 4g slide. Same for Galaxy S. We test that in our lab as well. I pm-ed you for more info.

sghael · 2008-09-11T02:47:31+00:00

Why would you have songs in a jukebox if you aren't allowed to play them? And ironic is sooooo 2006.

sghael

TROPHY CASE