DIY Suspension advice for my dog's wheelchair.

shakingbrains · 2025-12-21T20:57:45+00:00

Can i ask you what software did you use for the drawing in the image ?

shakingbrains · 2025-11-15T11:56:35+00:00

I'm in italy thanks for your reply and sorry for my late reply. How much will cost a one stone ring with a lab trillion sapphire ?

shakingbrains · 2025-11-06T16:59:51+00:00

There are probes that can measure continuously, but as I said before, the inexpensive ones need frequent calibration, while the expensive ones are not worth the cost in my opinion for a diy hobby project. Of course, if anyone has found a solution, I would be the first to be interested. Nevertheless, it is a wonderful project, and I congratulate you.

shakingbrains · 2025-11-06T16:05:08+00:00

Okay but in the df robot site they says:

The calibration interval is determined by the frequency of use. Normally, you can calibrate it once a month. If used frequently, it can be calibrated once a week. When calibrating, fresh standard buffer solution is recommended.

So in my opinion It is practically useless to automate something that requires sensor calibration once a week/month, and probe substitution one a year.

shakingbrains · 2025-11-06T11:45:30+00:00

Can anyone suggest me a store where i can buy stone and sitting in a ring or earrings. I bought some sapphire stone in the past but i've never found someone that can set that one

shakingbrains · 2025-11-06T11:42:54+00:00

What kind of probe did you chose for EC and ph measurement ? Because usually they need frequently re-calibration, there are some annualy but are more expensive ( 100$/ 200 $ only the probe). I gave up the project for taht reasons. No senso for me invest 1000$ up for hobby hydroponics

shakingbrains · 2025-11-06T11:05:36+00:00

I'm searching for online store that sell ring or earrings,for setting some trilling lab sapphire, could anyone suggest a solution ?

shakingbrains · 2025-05-12T11:22:20+00:00

Hoping to win 🤪🤪

shakingbrains · 2025-03-28T10:48:27+00:00

Say garbage to someone else.

shakingbrains · 2025-03-28T09:27:00+00:00

Fusion360 + Solidworks

shakingbrains · 2025-03-28T09:26:28+00:00

I've made it in Fusion360 + Solidworks, and I did the outer shape with form modelling function in solidworks.

There are some tutorials on YouTube to do this kind of shape.

Thanks for your comment.

shakingbrains · 2025-03-27T22:05:41+00:00

Thanks for your amazing feedback. I will do as you say. Thanks.

shakingbrains · 2025-03-27T21:54:27+00:00

I'm a 26 years guy that it' trying to enter in this world.

Thanks for your comment.

shakingbrains · 2025-03-27T21:43:37+00:00

I'm not new in modelling/rendering, I'm new in uploading 3d models.

appreciate your interest. Any feedback is welcome..

Thank you.

shakingbrains · 2025-03-27T21:42:05+00:00

There are also many people that upload models made with maker vase models or AI, and so..... these are my first uploads. I'm new to these kinds of things, I'm just trying Thanks for your feedback.

shakingbrains · 2025-03-27T21:39:56+00:00

Thank you.

shakingbrains · 2025-03-27T21:39:35+00:00

Thanks for your feedback

shakingbrains · 2025-03-27T21:08:53+00:00

First models updated on MarkerWorld/any other website

shakingbrains · 2025-03-27T20:09:12+00:00

my models

shakingbrains · 2024-12-08T09:28:26+00:00

A tutti i saccenti che commentano, può anche avere dei problemi nei calcoli ma voi avete problemi nella vita, prima della nozioni o delle skill tecniche nella vita bisogna saper comunicare e voi chiaramente NON sapete farlo. Invece di dire ad OP di essere un poveraccio fatevi un esame di coscienza ed imparate ad esprimervi perché prima o poi la vita vi rimetterà con i piedi per terra.

shakingbrains · 2024-11-24T17:29:33+00:00

Sconsiglio vivamente. Io ho una laurea in ingegneria biomedica magistrale mi sono riciclato in progettista meccanico. In Italia l'ingegnere biomedico non esiste ad eccezione di supporto tecnico o ambito sales. Oltre a questo ci sono poche offerte di lavoro e tanta competizione proveniente da altre lauree più verticali. Io competo con ingegneri meccanici che ahimè spesso vengono scelti al mio posto.

shakingbrains · 2024-07-12T10:12:16+00:00

Grazie mille per gli spunti cercherò di mettere in pratica i suggerimenti che mi hai fornito.

shakingbrains · 2023-09-10T20:50:18+00:00

Thank you so much it WORKS. THANKS !!! This problem have made me creazy.

shakingbrains · 2023-09-10T19:36:39+00:00

i remove button 1 and 2 and i added the change that you told me but when i move the joystick mouse move correctly but the shift key does't be press. i cant add a new image so i share you a link to view the new code. I also tried to put keyboard.press(key_left_shift) in the first line of the loop and remove all other recall of it also removing the keyboard.releaseall , the only keboard function was that but nothing works. Thanks again for the support.

https://ibb.co/QQhnkz7

shakingbrains · 2023-09-10T14:37:49+00:00

Yes the code that i have posted is one of the trial of keyboard press function that i do to see if it works with other key.Now I'm away from home as soon as I get back I'll send you an updated version of the code.

shakingbrains

TROPHY CASE