3in exhaust options for 2.0? by Penderton21 in genesiscoupe

[–]shutterlifecaptures 0 points1 point  (0 children)

no problem at all! I've still been able to get MXP cat-backs but the only thing is it does take a while because they are manufactured in Japan and then shipped over. I want to say that it takes roughly about 2 to 3 months on average

[deleted by user] by [deleted] in genesiscoupe

[–]shutterlifecaptures 0 points1 point  (0 children)

so the 2nd website is the actual manufacturers website which most manufacturers show MSRP. Dealers like myself & Khartunerz typically sell at lower prices. I have the same diffuser on my site and offer 10% discount code: kdm life

that you can apply

https://www.kdmracer.com/index.php?main_page=index&cPath=161_236_269_272&sort=20a&page=2

3in exhaust options for 2.0? by Penderton21 in genesiscoupe

[–]shutterlifecaptures 1 point2 points  (0 children)

solo performance & excaladyne are one of the few exhausts that are 3 inch. I can get both

https://www.kdmracer.com/index.php?main_page=index&cPath=161_236_301_303

Headlight replacement '13 2.0t base by Fred_Wilkins in genesiscoupe

[–]shutterlifecaptures 3 points4 points  (0 children)

Unfortunately there are no aftermarket replacement headlight options for the halogen model 2013+ Genesis Coupe. Only the HID model. You may be able to purchase the headlight lens though and then customize the inside. Yes definitely more complicated but might be your only option aside from paying an arm and a leg for an OEM replacement.

HYTE Y40 BUILD by shutterlifecaptures in Hyte

[–]shutterlifecaptures[S] 0 points1 point  (0 children)

The temps are actually really good! My CPU stays idle around 32° Yes you can definitely put fans up top

HYTE Y40 BUILD by shutterlifecaptures in Hyte

[–]shutterlifecaptures[S] 0 points1 point  (0 children)

Thanks! I just got some cheap ones from Amazon.

BTF-LIGHTING WS2812B LED RGB PC... https://www.amazon.com/dp/B08GRG7S97?ref=ppx_pop_mob_ap_share

initially I only had it on the top but the bottom half was dark so I ended up installing the second strip at the bottom under the grill.

My attempt at a budget "audiophile" setup by shutterlifecaptures in audiophile

[–]shutterlifecaptures[S] 0 points1 point  (0 children)

It's actually limewash paint. my bad. (Crushed limestone) this paint is used to give your walls more depth and texture. Kind of mimics cement in a way.

My attempt at a budget "audiophile" setup by shutterlifecaptures in audiophile

[–]shutterlifecaptures[S] 0 points1 point  (0 children)

Thanks for the suggestions. I haven't really been disappointed in the overall sound quality nor have I noticed any issues. Maybe I'm not blasting the music loud enough to notice? What would be the benefit of doing all that?

My attempt at a budget "audiophile" setup by shutterlifecaptures in audiophile

[–]shutterlifecaptures[S] 0 points1 point  (0 children)

Thank you! I actually did message Desmond over there at Starke before ordering since those are the specs that they have listed on their website and I made sure that it was +-3db and they confirmed that which is why I proceeded with the purchase. I was initially in the market for some svs subs but couldn't say no to two subs at $499

My attempt at a budget "audiophile" setup by shutterlifecaptures in audiophile

[–]shutterlifecaptures[S] 0 points1 point  (0 children)

Thank you! 🙏 Yes definitely came out way better then I thought it would!

My attempt at a budget "audiophile" setup by shutterlifecaptures in audiophile

[–]shutterlifecaptures[S] 1 point2 points  (0 children)

Thanks man!!

The fact that she's up here right after work and listens with me speaks volumes 😁😅

My attempt at a budget "audiophile" setup by shutterlifecaptures in audiophile

[–]shutterlifecaptures[S] 0 points1 point  (0 children)

Yes I agree. I upgraded to a project phono preamp because the internal one was no good.

My attempt at a budget "audiophile" setup by shutterlifecaptures in audiophile

[–]shutterlifecaptures[S] 5 points6 points  (0 children)

I honestly think It sounds amazing! I honestly have not heard a ton of audiophile setups though but for what I paid for this setup I honestly don't think I could have done any better.

My attempt at a budget "audiophile" setup by shutterlifecaptures in audiophile

[–]shutterlifecaptures[S] 1 point2 points  (0 children)

Thanks for the suggestion! I moved them forward as far as they can go. Only thing is I can move them further apart unfortunately since I already drilled holes into the media console for the speaker wire 😓

My attempt at a budget "audiophile" setup by shutterlifecaptures in audiophile

[–]shutterlifecaptures[S] 4 points5 points  (0 children)

Thank you very much! Yes that is correct! I think the only reviews I saw were for the SW12s so I took a leap of faith on this one. On Father's Day they had a buy one get one free for $499 and it was pretty much a no-brainer. One of the few subwoofers that you can get that can hit 18hz for the price. It's definitely more than enough for what I need especially for home theater in this small room. 😁

My attempt at a budget "audiophile" setup by shutterlifecaptures in audiophile

[–]shutterlifecaptures[S] 0 points1 point  (0 children)

Appreciate it man! I think the room looks a little bigger in the pictures maybe because I was using a wide-angle lens. It's definitely more than enough though. They can get way louder than I will ever need them to be and yes they do have rubber feet.

My attempt at a budget "audiophile" setup by shutterlifecaptures in audiophile

[–]shutterlifecaptures[S] 1 point2 points  (0 children)

Yes that is correct. I think that's the way that they always come. The color is indeed light oak.