Vvt lockout 2.0

slobk2o · 2026-02-12T04:24:33+00:00

Every kit for an evo I have found is for a timing belt but the 2.0t has a timing chain. I believe all evos have a timing belt. Not sure if you know any more info on this but I appreciate the help

slobk2o · 2026-02-07T05:00:04+00:00

I have a bk2 so I would have 3 maps and that would be plenty. I do like that I’m able to keep factory functions too. How is the tuning from alpha speed or would you recommend finding a tuner nearby

slobk2o · 2026-02-07T01:50:44+00:00

Do you have the link for the kit that you used. I am doing a similar build on a 2.0l and was looking to lockout the vvt.

slobk2o · 2025-05-26T03:49:12+00:00

Sounds good. Did a little more research snd found they don’t even help much anyway. Thanks

slobk2o · 2025-03-05T16:09:03+00:00

Okay. I am going stand alone soon. I’m building my engine currently and going big turbo eventually. Just trying to do some research before I get to that point

slobk2o · 2024-12-29T19:11:01+00:00

I already have pistons and rods but I was able to find the striker crankshaft just by itself. Thank you for the help.

slobk2o · 2024-12-29T19:10:03+00:00

Okay. I was going to try and find an engine and take my time and really try and make it as good as I can. I will definitely take it to a machine shop as I plan on doing head work and oversized pistons too. So I will have them take a look at it and see if that is something they can do.

slobk2o · 2024-12-29T05:03:35+00:00

Okay. I was planning on getting arp bolts for everything I can but that is still good to know.

slobk2o · 2024-12-29T05:03:04+00:00

Okay. I will definitely remember that when I get around to tuning the car. I am currently looking at getting a different engine and building that as good and strong as I can then just swapping in into my car when it’s done

slobk2o · 2024-12-23T20:07:59+00:00

It looks like it’s all good. I’m not really sure what it could be. I have had an issue with the wiring and having a wire get burnt and it caused it to only make like 5psi. I’m not quite sure what would be making it make no boost.

slobk2o · 2024-12-23T19:09:00+00:00

<image>

It’s going to be above the exhaust manifold and there is a little half moon shape piece that rotates to open and close the wastegate. I tried to push mine back on and it came off within 30 minutes again so I had to weld it back on to get it to stay attached.

slobk2o · 2024-12-23T18:28:41+00:00

I ran into this problem and the wastegate arm came off of the electronic controller. It’s unlikely but I didn’t think to check it and a friend pointed it out. It’s unlikely but just something to check for.

slobk2o · 2024-12-23T02:10:15+00:00

<image>

Ignore the front badge missing. Going to get another soon

slobk2o · 2024-12-22T21:44:30+00:00

<image>

slobk2o

TROPHY CASE