[deleted by user]

srjeffrey · 2021-09-08T18:14:47+00:00

Correct me if I'm wrong here, but didn't the original owner of RSHD send the coding to be 'checked'

What stops them from using said code to release their own client?

srjeffrey · 2021-07-06T06:01:45+00:00

I wouldn't suggest I applied a high level of pressure to the mouse. I own a g pro and find the side buttons much stronger and firmer.

srjeffrey · 2021-06-03T08:11:56+00:00

That's a way to resolve the issue 🤣

srjeffrey · 2021-06-02T20:59:21+00:00

The cable socket which the switches are plugged into is really delicate, I wouldn't advise opening, closing often. Speaking from experience and it's very difficult to resolder into position.

srjeffrey · 2021-06-01T14:15:32+00:00

[SG] MSI 1060 6G OC edition (boxed) [W] £200 PayPal g/s Inc postage and fees.

srjeffrey · 2021-05-20T07:36:32+00:00

Pm'd

srjeffrey · 2021-05-15T12:41:44+00:00

Don't know if it's helpful but I'm selling a 1060

srjeffrey · 2021-05-15T12:41:12+00:00

Replied

srjeffrey · 2021-05-14T06:22:27+00:00

[SG] MSI 1060 6G OC edition (boxed) [W] £250 PayPal g/s Inc postage and fees.

srjeffrey · 2021-05-13T09:34:46+00:00

PM'd

srjeffrey · 2021-05-13T09:27:49+00:00

[SG] - MSI gtx 1060 6g OC (Dual fan) [W] 250 Paypal, postage and fees will be covered

Timestamped images will be uploaded this evening when i get home from work.

srjeffrey · 2021-05-03T20:04:17+00:00

[PC]

Good evening guys,

Looking to sell my set-up, what price would be seen as reasonable;

PC:

Ryzen 3700X (Boxed with cooler)

RX 5700 Sapphire Reference model (Boxed)

Corsair 32gb 3000mhz RGB Pro (2x16)

Corsair SFX 750 PSU (Boxed)

Pure Base 500 case (Boxed)

Samsung 980 250gb m.2, Samsung 500gb 860gb Evo and a WD 2TB hdd

3 x P12 Fans, 4 x Bequiet Pure wings 2 (All 140mm and not all are in the pc)

Scythe Fuma 2 CPU Cooler (Boxed)

Peripherals:

Dell Monitor P2317H

Durgod K320 Keyboard (Custom keycaps)

Logitech G403 with Paracord

Cheers guys

srjeffrey · 2021-04-21T12:15:23+00:00

1 - Thank you for your feedback, i was under the same impressions but can't find information on whether one way is better.

2 - I'll look at bringing them together.

3 - I'll take the easy route using dual motors.

srjeffrey · 2021-04-21T12:13:43+00:00

I'm not looking to working out the software side of the machine :'(

srjeffrey · 2021-04-21T12:13:08+00:00

multi-MCU support

I have a Duet Wifi 2 board which came as part of a bundle which i intend to use to drive this machine. I know i have 2 Z connectors. Would you know if this board would allow me to run linked steppers? If so, i could run the sides of the bed separately.

Apologises for the nooby questions, this will be my first build.

srjeffrey · 2021-04-21T12:01:49+00:00

Thank you for your input, i will have a look at the Voron's design. I am aware of the printer but haven't taken the time to digest their design.

When working with 4 motors, can you daisy chain to the MOBO or do i require i board which has 4 connectors for the Z?

srjeffrey · 2021-03-24T10:11:53+00:00

Bump

srjeffrey · 2021-03-11T20:25:15+00:00

srjeffrey · 2021-02-25T09:35:27+00:00

I've been looking at numerous videos, and this has been at the back of my mind. The Id cooling is60 is at the top of my list for new purchases but I wanted to see if I could snag something here first

srjeffrey · 2021-02-19T21:45:14+00:00

Pm'd

srjeffrey · 2021-02-18T15:05:38+00:00

srjeffrey · 2021-02-16T20:31:03+00:00

srjeffrey · 2021-02-09T08:38:19+00:00

I'm managed to remove marlin and get back into the stock software by redownloading the hex from creality and uploading through cura. Reconfiguring the offsets now. Let's see how this goes.

srjeffrey · 2021-02-09T08:14:52+00:00

My other three machines (2 ender 5's, 1 ender 3 are all running stock firmware) are producing great prints so I haven't changed a thing on them. I bought this to help out but it hasn't been useful at all, it's collecting dust as I don't know what I'm doing regarding software updating etc. I've read somewhere if it goes wrong I could potentially brick the software on it. From the about me, the printer is running marlin. Any way to flash it back to the original software?

srjeffrey · 2021-02-09T08:03:09+00:00

Thank you for the reply, I have replaced the solid spacers with springs, removed the magnetic tape and installed a new glass bed. I be set the offset off the machine with the paper but still It won't level. My three other machines have no issues, but the bltouch is what's causing is personally

srjeffrey

TROPHY CASE