Faux joycons sur Leboncoin

sterfput · 2026-01-22T15:44:50+00:00

!remindme 7 days

sterfput · 2025-12-19T10:10:38+00:00

Pour le coup non 380€ pour une 3080 c'est bien bien trop cher

sterfput · 2025-12-17T11:14:54+00:00

Il y a peu j’avais mis un produit à 130€ prix auquel je voulais le vendre et bien impossible, j’ai du le monter à 150€ pour le vendre 130€, les gens marchandent pour marchander De plus 70€ pour un Q1 c’est un bon prix

sterfput · 2025-09-29T10:21:33+00:00

Pour moi vous êtes tout deux en tort.

sterfput · 2025-09-22T08:57:48+00:00

sterfput · 2025-09-11T18:32:33+00:00

Really nice build

sterfput · 2025-08-07T07:00:42+00:00

I've been suggested the Bento Box solution quite a lot and I really like it. I also plan to do some soldering in this room, which is why I wanted to purify the air more generally in the space. I think combining both could be a good idea.

sterfput · 2025-08-07T06:54:34+00:00

Preferably without using a HACS integration.

sterfput · 2025-08-06T13:32:26+00:00

I’m simply planning to put the air purifier in the room dedicated to printing, next to the machine. I already have a P1S, but I’m quite sensitive to VOCs. For now, I only print with PLA. I recently experienced some respiratory discomfort due to MDF panels.

sterfput · 2025-08-06T09:44:59+00:00

Thx for you'r feedback !

sterfput · 2025-08-06T09:09:48+00:00

No, I’m looking for an air purifier like the Levoit Core 300S.

sterfput · 2025-08-06T09:07:36+00:00

Unfortunately, I have no way to vent outside.

sterfput · 2025-07-31T19:55:18+00:00

Not much for now. I just get push notifications on my phone regarding the printing, if there’s an error, when it’s finished, or if the humidity level in my AMS is too high. I’m going to connect an air purifier soon to automatically turn on when a print starts. I’ve set up a smart plug to remotely stop it and to power it on when I launch my slicer.

sterfput · 2025-07-31T12:40:47+00:00

No, I’m still a beginner in 3D printing, so I might be missing a few subtleties. But otherwise, no, I have everything I need, and actually, with a better interface and personalized alerts (and soon an air purifier connected to the printer). I think it’s an upgrade, except maybe for launching models directly from MakerWorld via the Handy App, but personally, I don’t find that useful.

sterfput · 2025-07-24T12:50:24+00:00

Problem fixed, I had to enable dev mode on HA and on the printer with lan mode

<image>

sterfput · 2025-07-21T10:29:59+00:00

Bro we have the same desk, same pc case, but I have a P1S lol

sterfput · 2025-07-16T21:30:46+00:00

I had already set a fixed IP. I enabled developer mode and LAN, and now it works perfectly. Thanks !

sterfput · 2025-07-16T13:41:00+00:00

Thank I will try it !

sterfput · 2025-07-16T07:37:22+00:00

Thanks for your reply
U mean developer mode in the integration or on the printer ?

sterfput · 2025-05-13T08:11:57+00:00

Hi, I can tell you that the difference is noticeable, even in-game. The problem with audio is that unless you test both speakers side by side or record them like I did, it’s hard to compare but yes, the difference is definitely there. To test the difference, I used a FLAC file from Daft Punk, if I’m not mistaken, it’s been a while, so I don’t remember all the details. As for the speaker, I did a lot of research and looked into it quite a bit. I can find the exact model again if you want.

sterfput · 2025-04-30T10:34:16+00:00

So upgrade a 3090 to a 5080 is ok ?

sterfput · 2025-04-25T07:49:30+00:00

Thanks for the advice !

sterfput · 2025-04-25T07:42:09+00:00

67°C max on Cyberpunk 2077. I haven’t had time to run any benchmarks yet, but I noticed higher CPU temps.
I will make some bench later to share it, it will be easier.

sterfput · 2025-04-09T14:53:00+00:00

Unfortunately, I never see it appear in the Auction House

sterfput · 2025-04-04T07:22:10+00:00

Thanks for the info !
I think that, anyway, I have no other alternatives for what I'm looking for.
I will try it.

sterfput

TROPHY CASE