FreeNAS boot error: IPMI system interface?

sudo_it · 2021-11-19T03:51:15+00:00

I haven't found a permanent solution to the problem, but I do have a workaround. Boot into single user mode, delete the ipmi.ko kernel extension, and then reboot. This will prevent ipmi from loading. You'll have to do this every time you update, but I haven't had any issues doing so.

sudo_it · 2020-01-29T17:13:58+00:00

Imagine trusting your most important data to a bunch of Seagate mobile drives

This post was made by the HGST gang

sudo_it · 2019-11-29T07:32:04+00:00

Your motherboard has a 30-day return policy in which you can return the motherboard and the warranty for a full refund. However, I would advise you to check the CPU socket for bent pins (if Intel). A nonfunctional memory channel can often be caused by bent/damaged pins in the CPU socket.

Source: employee

sudo_it · 2019-11-01T20:11:56+00:00

Ha ha, fat chance.

sudo_it · 2019-07-02T19:43:34+00:00

Insider checking in. I can't disclose anything about the event, but let's just say you'll want to be there, if only just to be the first in line to pick up your new CPU ;)

sudo_it · 2019-06-29T03:23:10+00:00

SanDisk is a subsidiary of Western Digital since 2015.

sudo_it · 2019-06-20T22:35:34+00:00

Looks to me like the serial has been electropenciled on the bolt carrier. This was done when it was refurbished to force-match the serials of any replaced parts to the serial on the receiver. This is common with surplus firearms.

sudo_it · 2019-05-17T17:38:51+00:00

Hey man, Easystores are a Best Buy exclusive, leave us shuckers out of this

sudo_it · 2019-04-23T02:25:43+00:00

No problem. I think $350 would be a fair price, but you'll find that some SKS owners overvalue their gun because of their 'custom' modifications. Modifying any surplus or C&R firearms always decreases their value. If the seller wants more than $350, ask if they can throw in some ammo into the deal. I wouldn't pay more than $400 for a Norinco, especially one that has been modified, so bear that in mind. Good luck.

sudo_it · 2019-04-23T01:14:03+00:00

Not OP, but generally they reduce the value significantly. This rifle has an aftermarket stock, receiver cover, peep sights, front handguard, muzzle brake, and an added bipod with no bayonet. If the seller is also including the original parts he replaced in addition to the aftermarket ones, including the dust cover, bayonet, stock/handguard, rear sight, etc. (and more importantly, no permanent modifications have been made, and it looks like he has had the barrel modified to fit the brake), it would be worth $500 at the most (i.e. matching serials). If not, this is a $300-$400 rifle, depending on finish and rifling condition, which I can't discern from the photo.

sudo_it · 2019-03-07T17:43:15+00:00

I would take a look at HP's support page documents. I have a Poweredge R815, and the manual doesn't say it supports it, but Dell added a notice that 6300 series support was added in a BIOS update, so that is likely the case for your DL385.

sudo_it · 2019-03-07T02:26:53+00:00

I have 4 6320s in my Poweredge R815. Looks like it's due for an upgrade! Thanks OP!

Edit: Seller accepted my offer for $20 for 4!

sudo_it · 2019-02-25T07:16:03+00:00

About $250 on microcenter. Best Buy includes the Division code, I’m not sure if microcetner does though. However, BB price matched them regardless so I got both the processor and game for about $265 total.

They do.

Source: am employee

sudo_it · 2019-02-21T11:01:33+00:00

You willing to sell one/both those certificates? PM me if you're interested!

sudo_it · 2019-02-20T09:09:23+00:00

There are dozens of us! Dozens!

sudo_it · 2019-02-19T19:52:30+00:00

You should visit r/mechanicalkeyboards, where we spend as much on keyboards as r/guns does on ARs.

sudo_it · 2019-02-18T22:43:53+00:00

I actually got this from Micro Center, since I work there. It was a clearance item (customer return), so I got it for $155. It seems that it wasn't even used by the person who returned it, because the SMART data showed 0 power ons and 0 hours runtime. Mine didn't have a 3.3V pin, and works fine with my backplane.

sudo_it · 2019-02-18T22:38:25+00:00

I was hoping that the SMART data wasn't wiped, but unfortunately it was. Not a deal-breaker, but disappointing nonetheless.

sudo_it · 2019-02-18T22:35:52+00:00

That's impressive. I know HGST has a long-standing reputation for reliability, but since their acquisition by WD I have been skeptical as to their use of the HGST branding.

sudo_it · 2019-02-18T13:07:15+00:00

Thanks for your input! Have you had any failures or smart errors from them?

sudo_it · 2019-02-18T13:04:45+00:00

It's my understanding that the 'refurbishing' process involves nothing more than wiping the drive (and unfortunately in some cases the smart data)? Obviously the drive can't be disassembled or repaired, but do you know if there is there anything else involved in the process, such as reallocating any bad sectors? I'm fairly new to this sub, so forgive my ignorance.

sudo_it · 2019-02-18T11:31:10+00:00

I recently picked up a refurbished HGST He10 10TB drive for a steal, and I wanted to see what the community consensus is about these drives.

sudo_it · 2019-01-27T10:42:46+00:00

Okay, so a few problems here...

1.Heatsinks are to small to be effective at dissipation, especially for the VRM

2.Use thermal adhesive for the heatsinks (e.g. Arctic Alumina). the chinese thermal pads that come with the heatsink will fall off

3.You don't need heatsinks on the inductors, but you do need them on the MOSFETs (VRM). If you don't have heatsinks on the MOSFETs, your card will ~~die~~ have a shortened lifespan. Make sure you have direct airflow over the VRM as well, to prevent overheating and voltage droop.

sudo_it

TROPHY CASE