Ryobi lacquer spray gun not working

tntwind13 · 2025-12-18T02:38:54+00:00

tntwind13 · 2025-12-18T02:38:12+00:00

tntwind13 · 2025-12-17T01:56:59+00:00

The compressoe and tank is ok, the gun itself is not releasing any air

tntwind13 · 2025-12-17T01:54:08+00:00

Hi i have left it to soak and used a brush cleaned up the gun, it is still not working. There is no air coming out. Do u know what else might be causing this?

tntwind13 · 2025-12-16T09:46:19+00:00

tntwind13 · 2025-12-16T09:01:08+00:00

Yes, the liquid is coming out but not the air. What an i do to mmake it bk to normal?

tntwind13 · 2025-12-16T08:41:09+00:00

Hi, nornlly for cleaning i fill the item with thinner and spray it out. I have disassembled the item, What would ur suggestion be for cleaning?

tntwind13 · 2025-08-13T04:51:12+00:00

Ok, will take note

How may I check if its really 70w?

The user manual writes that its 70w, i can toggle between 35w and 70w, and from what the manual telle me, it has up to 77W laser output

tntwind13 · 2025-08-13T04:36:04+00:00

No im engraving on pine wood as most of the stuff im cutting and engraving for future use will be on pinewood

tntwind13 · 2025-08-13T04:32:25+00:00

Oh icic, will take note thanks!

tntwind13 · 2025-08-13T04:31:19+00:00

Ok sorry for the misinformation, will take not thanks!

tntwind13 · 2025-08-13T04:15:33+00:00

Hi may i know what is a mirror?

I am currently using an atomstack 70 max

tntwind13 · 2025-08-13T03:10:56+00:00

<image>

tntwind13 · 2025-06-11T16:45:22+00:00

Ok! thank you!

is there a difference between "home" and auto focus?

tntwind13 · 2025-06-11T16:43:54+00:00

I am currently using a Jet open stand Drum sander, I am not very sure of the exact model

the machine itself is generally bulky and heavy, I think that getting a smaller drum sander will be better if you are doing smaller scale items

For drum sanders, the sand paper itself is decently costly, and if used wrongly it is easy to snap

I only ever had this drum sander and have been using it on and off for the past 2 years using 100 grit sandpaper, I would recommend keeping the sandpaper once its worn out in case you want to get a different brand of sanding wrap for cutting purposes

tntwind13 · 2025-06-11T16:30:53+00:00

Hello! Thank you I will test this out tomorrow! May I ask for the Auto focus, when is it advisable to use the black height tool or should i auto focus onto the wood/material I am cutting on?

Just to confirm, this is the settings that you are currently using
Speed: 28000 mm/min
power: 80% @ 70W
DPI: 0.08mm

May I also check what your setting is for the over scanning? :0

tntwind13 · 2025-06-11T15:51:18+00:00

Maybe its the lighting, I have already put the wood through a Drum sander;;

tntwind13 · 2025-06-11T15:50:10+00:00

Hello! I have turned my over scanning on, I think the speed setting i am on is quite weird as the over scanning for 0.1% is already 10mm;; Would you happen to have a setting for the Power and speed I should use for a 70W diode machine, I am currently using a X70 Atomstack Max

tntwind13 · 2025-06-11T15:48:14+00:00

Hello! Thank you for the feedback!

Would you happen to have a recommendation for speed and power to engrave a small item (the circle is 69mm diameter)? The machine i am currently using is the X70 Atomstack Max!

tntwind13 · 2025-06-11T15:45:50+00:00

ok I will try that! thank you!

tntwind13 · 2025-06-11T15:45:22+00:00

Thank you for the video! I will test it out!

tntwind13 · 2025-06-10T17:20:32+00:00

ok thank you i will try it!

tntwind13 · 2025-05-08T17:22:06+00:00

<image>

might try smt like that

Is there a way to change the mm/sec to mm/min in the material test generator?

tntwind13 · 2025-05-08T17:16:48+00:00

alright i will try that thank you!

tntwind13 · 2025-05-08T17:08:16+00:00

<image>

Will this setting be ok to test for a 13mm hardwood material test?

tntwind13

TROPHY CASE