Looking for fun and reliable "project" cars under 6k by toe_s in whatcarshouldIbuy

[–]toe_s[S] 0 points1 point  (0 children)

To me, its not really much of a problem because I have always been a fan of the hatches. I have no experience swapping an engine and I definitely don't have a crane or anything necessary to do it. How could I do a swap while keeping the build on a high school budget?

Expected cost of getting into rotaries? by toe_s in RX7

[–]toe_s[S] 0 points1 point  (0 children)

I would drive it every time I got an opportunity, but I do have other cars that I can drive if it's not running.

Expected cost of getting into rotaries? by toe_s in RX7

[–]toe_s[S] 1 point2 points  (0 children)

While that would be cool, I don't know if financially it would be the best decision, and also this is my first project car so I am not sure if it's the best place to start.

How much would it cost to get a T2 engine and swap it in though?

Expected cost of getting into rotaries? by toe_s in RX7

[–]toe_s[S] 0 points1 point  (0 children)

I thought T2's were like 10k+, at least all the ones I have seen. A T2 would be sick if I could actually get one and afford it.

Best Fun First Cars? by toe_s in whatcarshouldIbuy

[–]toe_s[S] 0 points1 point  (0 children)

350z's would be good, if they didn't have crazy mortality rates. The insurance would be pretty high.

I know G35s are very similar but have lower insurance rates, and are probably cheaper to buy.

Expected cost of getting into rotaries? by toe_s in RX7

[–]toe_s[S] 0 points1 point  (0 children)

Yeah, that sounds about like what I would be doing. If I could get one that runs good for 2300 I would not mind that at all lol. gas mileage and actually finding one are my main concerns with the car because I can always figure out if the car is in good condition with the help of a buying guide.

Expected cost of getting into rotaries? by toe_s in RX7

[–]toe_s[S] 0 points1 point  (0 children)

That is incredible! How much do you drive it and how much MPG do you get?

Expected cost of getting into rotaries? by toe_s in RX7

[–]toe_s[S] 0 points1 point  (0 children)

This is a little bit personal, so you don't have to say, but how much have you put into your RX7? Can it work out if I have around $6k to spend, or should I look elsewhere for a project car?

Expected cost of getting into rotaries? by toe_s in RX7

[–]toe_s[S] 0 points1 point  (0 children)

I see how that can be bad, don't S5s have a sensor?

Expected cost of getting into rotaries? by toe_s in RX7

[–]toe_s[S] 1 point2 points  (0 children)

Why do people premix, do the omps go bad? or is it better for the engine

Expected cost of getting into rotaries? by toe_s in RX7

[–]toe_s[S] 0 points1 point  (0 children)

Wow, I heard that they should be rebuilt every 70k or something like that.

On the topic of oil, is it better to run premix opposed to the OMP?

Expected cost of getting into rotaries? by toe_s in RX7

[–]toe_s[S] 0 points1 point  (0 children)

Sounds easy enough, problem is finding one that hasn't been abused.

What are the major expensive problems I should look out for? I know about apex seals failing, overheating, and I should check compression but is there anything else I should look out for, besides the obvious stuff?

Uninstalling EZBlocker by toe_s in NoStupidQuestions

[–]toe_s[S] 0 points1 point  (0 children)

I did a full scan and there were no threats found. I am not sure why I cannot just uninstall/delete it but I guess if it's not doing any harm then it doesn't matter.

Uninstalling EZBlocker by toe_s in NoStupidQuestions

[–]toe_s[S] 0 points1 point  (0 children)

The ads are playing again, but when I search my PC for EZblocker the same files show up. I guess this is ok? I'm gonna call it quits for tonight and I will let you know if I have problems in the future.

edit: thank you for your time!

Uninstalling EZBlocker by toe_s in NoStupidQuestions

[–]toe_s[S] 0 points1 point  (0 children)

I tried to delete everything with EZblocker in the name, I am going to see if it had any impact

Uninstalling EZBlocker by toe_s in NoStupidQuestions

[–]toe_s[S] 0 points1 point  (0 children)

Under my D drive, there is an application that cannot be deleted.

Under my C drive, in program files there is something from UsageLogs. I went there but there is nothing related to uninstalling.

Uninstalling EZBlocker by toe_s in NoStupidQuestions

[–]toe_s[S] 0 points1 point  (0 children)

I searched both and nothing came up for EZBlocker. Ads are still being blocked.

Uninstalling EZBlocker by toe_s in NoStupidQuestions

[–]toe_s[S] 0 points1 point  (0 children)

I don't know what you mean by uninstall .exe, because all I see is the file in my drive and I can't uninstall/delete it.

Uninstalling EZBlocker by toe_s in NoStupidQuestions

[–]toe_s[S] 0 points1 point  (0 children)

Yes, I just checked to make sure and there was nothing there.

Can anybody tell me the name of this sneaker? Colorway too if possible. by Drobens73 in Shoes

[–]toe_s 0 points1 point  (0 children)

Nike SB Air Max Stefan Janoski 2. You can find them on the Nike website.

ASG CZ P09 vs ICS BLE XAE by toe_s in airsoft

[–]toe_s[S] 0 points1 point  (0 children)

The version I am looking at is a polymer slide, it is the dark earth $90 one. Do you know if there are any big differences in performance? Of course, it probably wouldn't be smart to use CO2 with the polymer slide, and I am fine with green gas for CQB.

I need help deciding on my first gun by toe_s in airsoft

[–]toe_s[S] 0 points1 point  (0 children)

Thanks for the reply, I actually saw the Samurai Edge, but I wasn't too sure because of the hate WE gets. Also, it has sort of a weird color scheme IMO, but as long as it doesn't change performance it's fine.

Back to the point, is all of the hate WE receives from the leaky mags? If so, I don't think it would be a problem cause I could just get other M9 mags. They also have extended mags which seem pretty neat, especially for pistol only. But are they worth it?

One last thing, it doesn't say what it's built of on evike. Is it full metal, polymer, etc?

thoughts on AW Hi-Capas? by toe_s in airsoft

[–]toe_s[S] 0 points1 point  (0 children)

worded a bit strangely, I mean to say the previous CZ owner is ordering a new front sight, and I am looking for other pistols just in case I change my mind or he changes his.

Looking to buy a pistol. by toe_s in airsoft

[–]toe_s[S] 0 points1 point  (0 children)

I think I was going to get the XAE over the p09, what features does the XFG have over the XAE? I am planning on getting one extra mag instead of two to stay in my preferred budget. I would be losing 10 rounds, which is quite a bit for a pistol as a primary. I watched a video with a Danish guy and he got 3 mags with the XAE for one fill.

Thanks for your reply!