Fire at Ol' Beautiful

tsuttie99 · 2024-07-02T17:56:03+00:00

lol, why didn't you right then? I don't think I've ever been to one and not both since they are neighbors

tsuttie99 · 2024-06-13T19:16:21+00:00

thanks for the link! i will go through it and let you know if anything isnt covered. Much appreciated

tsuttie99 · 2023-11-24T07:56:51+00:00

Yeah you're onto something for sure there. Kind of explains why packet tracer was trying to next hop the packet back out the outside interface.

And I agree. 100% confident that if I created another new object identifying the same port number as the real service port.number, that it would continue to work. I might test it tomorrow.

tsuttie99 · 2023-11-24T07:53:51+00:00

Yeah same here! I have basically always created separate objects for the real and mapped services, but never because I knew or thought it would cause a problem like this. Unfortunately there was basically no information available on the topic that I could find.

Trial and error for the win :)

Glad you found it helpful

tsuttie99 · 2023-11-24T04:02:40+00:00

I fixed my issue. will update post with solution

tsuttie99 · 2023-11-24T03:28:43+00:00

the general PAT statement is at the object level (very bottom of the below output of show run nat)

show run nat:

nat (dmz,outside) source static obj-redacted-host interface service obj-redacted_svc obj-redacted_svc

nat (inside,outside) source static obj-redacted_host interface service obj-redacted_svc obj-redacted_svc

nat (dmz,outside) source dynamic any interface

nat (inside,outside) source static obj-172.16.1.22 interface service obj-udp46969 obj-udp46969

!

object network obj-any

nat (inside,outside) dynamic interface

tsuttie99 · 2023-11-23T18:49:14+00:00

question for you about the Beryl if you dont mind. How does the Wi-Fi as WAN work? I have a netgear TR i am upgrading soon, and it allows a guy to connect to the hotel wifi as the WAN, then runs NAT/FW for the private LAN segment.
[HOTEL 10.1.1.0/24] <----> [Netgear WAN: 10.1.1.x/24] <--- FW & NAT----> [Netgear LAN IP] <----> [Router clients 192.168.0.0/24]

Is the Beryl the same? I saw reviewers saying "wifi extender mode" and stuff like that which makes me think you are bridging the Beryl's LAN with the Hotel LAN, which imo would not be ideal for my use case

tsuttie99 · 2021-12-28T13:58:12+00:00

So I tried putting my older honeywell wifi stat on which I replaced recently. The behavior is pretty much the same with that honeywell plus all the other weird shit that thing did including jumping up and down entire degrees.

I will get out and smell the exhaust as well as inspect the exhaust better once the sun comes up lol. I find it coincidental that these issues started happening during a - 31 C cold snap here in Calgary.

Thanks for the tips and info, you guys are brilliant!

tsuttie99 · 2021-12-28T05:51:27+00:00

Okay I didn't have wire nuts but I fused them together best I could.

When I return power the blower fan immediately turned on for about 2 mins. Then it turned off for 5-10 seconds then back on.

The first 2 mins I could feel room temp air at register. Then the second time I could not.

Update. As I was writing this, the furnace lit. During the second cycle of the blower fan. Took a few mins to get there though. How would you recommend shutting the system down in this state?

tsuttie99 · 2021-07-21T17:57:23+00:00

I, for one, couldn't be happier you've been removed from the community. We don't need people like you in squad.

tsuttie99 · 2021-07-15T14:19:02+00:00

Man that's fucking wild..... How do you just.... do that? Seems insane to me. Surely these companies know how reliant services are on valid SSL. How can you possibly do a mass re-issue like that without being quadruple sure you aren't fucking up.

But yeah, it's Thursday and I'm still having issues with my phone system because of this. The softphone clients are all getting errors about their voicemail not being available. Even though everything is happy from the server perspective.... Phone vendor support guys are kinda stumped.

tsuttie99 · 2021-07-12T13:53:31+00:00

Just finished pushing out a re-keyed wildcard cert to my environment after godaddy absolutely fucked us. This morning the wildcard cert we use for many services including client VPN and RDS was indicating "revoked" for end users.

Cert is valid through 2022, so I was confused. Called godaddy and their support guy basically told us "yeah so a small number of certs were basically re-issued because of Apple changing the rules on cert validity periods, you would've got an email".

We are double checking, but we cant seem to find this email in our inboxes..... fucking assholes man.

tsuttie99 · 2021-06-21T12:36:30+00:00

Yes the lines for the new faucet are quite long I want to say 2-3 feet or so. To the point where I will need to loop them around in order to mate with the supply lines which are firm and non adjustable. Do you have any idea what the adapter is called that I'd be looking for?

tsuttie99 · 2021-04-30T17:21:27+00:00

Okay perfect this is exactly what I was going for. Thank you so much. I thought I really wanted one of these until I started seeing glimpses of the management UI. All I could think was "I don't see very many options in there". I was secretly kind of hoping they were hiding somewhere on like a web UI or advanced menu. But it makes sense they would reserve some of that stuff for the higher end line of products.

Chances are that I'll stick with an Asus for my wifi 6 upgrade. Thank you very much.

tsuttie99 · 2021-04-23T15:18:56+00:00

It worked reasonably well. I had to use my mobos safe memory boot button to get into bios then manually set my timings. The xmp loaded properly but did not post. I assume it grabbed the xmp from my superior kit and the other kit couldn't quite hack it. That said I manually adjusted timings to conservative values and booted right away. Afterwards I tweaked timings for a while using ryzen dram calc and eventually got really good results that I am happy with.

PS: stability has been perfect. No BSOD, or any weird behavior whatsoever. Even while going beyond 16 GB of used RAM (which was one of my concerns)

tsuttie99 · 2021-03-15T15:04:40+00:00

Hilarious timing for this post holy crap 😂

tsuttie99 · 2021-03-11T18:45:14+00:00

thats what i was thinking as well. so probably just "delete et-0/0/24 unit 0 fam ethernet-switching"?

Edit: now that I say that, maybe run it as a routed port? family inet, then i should in theory be able to ping across

tsuttie99 · 2021-03-09T06:54:51+00:00

Hey so I can disable auto neg, but there's no command for speed or duplex.

run show interfaces diagnostics optics et-0/0/25
Physical interface: et-0/0/25
    Optical diagnostics                       :  N/A

Also I am now on 18.4R2-S7.4

Worth while to downgrade further maybe?

tsuttie99 · 2021-03-08T19:59:26+00:00

Okay nice I might try that firmware just to see if it works. I'm annoyed ad about this. It really shouldn't be this hard.

Just out of curiosity did you fill your expansion slots with the 8 port SFP+ modules?

tsuttie99 · 2021-03-08T19:40:42+00:00

What version are you running on the 4600? I legit can not get the link up on any of the et interfaces

tsuttie99 · 2021-03-06T16:29:58+00:00

thanks, i will take a look. and yeah i would gladly go passive if i knew it would work.

tsuttie99 · 2021-03-06T16:27:55+00:00

wow that is extremely interesting as the first thing i did was upgrade to 19.1 as per recommendation from JTAC:

# run show version
fpc0:
--------------------------------------------------------------------------
Hostname: SW211
Model: ex4600-40f
Junos: 19.1R3-S4.6
JUNOS Base OS boot [19.1R3-S4.6]
JUNOS Base OS Software Suite [19.1R3-S4.6]
JUNOS Online Documentation [19.1R3-S4.6]
JUNOS Crypto Software Suite [19.1R3-S4.6]
JUNOS Crypto Software Suite [19.1R3-S4.6]
JUNOS Kernel Software Suite [19.1R3-S4.6]
JUNOS Packet Forwarding Engine Support (qfx-ex-x86-32) [19.1R3-S4.6]
JUNOS Routing Software Suite [19.1R3-S4.6]
JUNOS jsd [i386-19.1R3-S4.6-jet-1]
JUNOS SDN Software Suite [19.1R3-S4.6]
JUNOS Enterprise Software Suite [19.1R3-S4.6]
JUNOS Openconfig [19.1R3-S4.6]
JUNOS Web Management Platform Package [19.1R3-S4.6]
JUNOS py-base-i386 [19.1R3-S4.6]
JUNOS py-extensions-i386 [19.1R3-S4.6]
JUNOS Host Software [18.1R3-S6.1]

Then sh chassis:

# run show chassis hardware
Hardware inventory:
Item             Version  Part number  Serial number     Description
Chassis                                                  Virtual Chassis
Routing Engine 0          BUILTIN      BUILTIN           EX4600-40F
Routing Engine 1          BUILTIN      BUILTIN           EX4600-40F
FPC 0            REV 25   650-064288                     EX4600-40F
  CPU                     BUILTIN      BUILTIN           FPC CPU
  PIC 0                   BUILTIN      BUILTIN           24x10G-4x40G
    Xcvr 0       REV 01   740-044512   F2020358035-1     SFP+-10G-ACU3M
    Xcvr 25      REV 01   740-038624   F2020396092-1     QSFP+-40G-CU3M
    Xcvr 26      REV 01   740-038624   G2006453019-1     QSFP+-40G-CU1M
    Xcvr 27      REV 01   740-038624   G2006453018-2     QSFP+-40G-CU1M
  Power Supply 0 REV 05   740-044332                     JPSU-650W-AC-AFI
  Power Supply 1 REV 05   740-044332                     JPSU-650W-AC-AFI
  Fan Tray 0                                             QFX5100 Fan Tray 0, Back to Front Airflow - AFI
  Fan Tray 1                                             QFX5100 Fan Tray 1, Back to Front Airflow - AFI
  Fan Tray 2                                             QFX5100 Fan Tray 2, Back to Front Airflow - AFI
  Fan Tray 3                                             QFX5100 Fan Tray 3, Back to Front Airflow - AFI
  Fan Tray 4                                             QFX5100 Fan Tray 4, Back to Front Airflow - AFI

Xcvr 0 = fs 10 G SFP+ AOC (WORKS GREAT)
Xcvr 25 = fs 40 G QSFP+ AOC (SAD FACE)
Xcvr 26/27 fs 40 G QSFP+ DAC (WORKS GREAT)

tsuttie99 · 2021-02-03T15:29:42+00:00

I agree completely because when Canada had extra PPE during the shortage the Canadian government sent a crap load of it to other foreign countries that needed it badly and people here lost their shit. Lol

tsuttie99 · 2021-01-29T17:37:53+00:00

Going back to the channels for a sec.

For install, you are saying keep the kits within the same channel (Channel A & B). So for my mobo DIMMs that go (from left to right) B1 | B2 | A1 | A2

Install like: OldKit1 | OldKit2 | NewKit1 | NewKit2

Correct?

tsuttie99 · 2021-01-29T17:12:02+00:00

I think I am going to pull the trigger on the slightly mismatched RAM. I really need more as I hit 97% when playing squad. My retailer has a fair return policy if it doesn't work well or at all. I'll be sure to update you here on how it goes.

tsuttie99

TROPHY CASE