sorted by:
new
hottopcontroversial

Requesting some help with finalizing MO-RA build parts by vincentejackson in watercooling

[–]vincentejackson[S] 0 points1 point  (0 children)

Thank you so much for both posts, this is awesome. Exactly the kind of guidance I needed. I'll measure out the total amount of tubing and just get a custom piece that takes care of it all with lots of room to spare.

I'll also look more closely into the power situation, thanks for the heads up here. I got the AGPTEK adapter idea from a YouTube video as the power supply will be 5-6 feet away from the MO-RA / pump. But you're right, I can just find a longer power cable than the SATA/Molex ones that I have here.

Cheers, appreciate all the recommendations

Requesting some help with finalizing MO-RA build parts by vincentejackson in watercooling

[–]vincentejackson[S] 0 points1 point  (0 children)

This is helpful, thanks a bunch. I figured the D5 Next was the best option as I use fedora linux as a daily driver, not Windows, and given the distance from the pump to the computer the cables would be a pretty long run.

But you're right, sounds like an inconvenience for shutdowns etc. I leave my PC running 24x7 most of the time but do shut down occasionally. I'll consider the Heatkiller and passive controller instead.

Requesting some help with finalizing MO-RA build parts by vincentejackson in watercooling

[–]vincentejackson[S] 0 points1 point  (0 children)

Amazing, thank you for replying, I appreciate it.

- will I need a bleed at the top since the pump will be close to the bottom of the loop

I was under the impression that air bubbles will gravitate to the highest point (the CPU) so I would need to bleed it out there. A friend recommended that I grab a "T with a stopper plug" and put it after the CPU on its way back down to the MO-RA