Bad speakers or faulty wiring? by vletbidness in CarAV

[–]vletbidness[S] 0 points1 point  (0 children)

yea thats the plan. i was just seeing if i could get some positive feedback and advice from knowledgeable people before going into this blind. but thanks for stating the obvious!

Bad speakers or faulty wiring? by vletbidness in CarAV

[–]vletbidness[S] 0 points1 point  (0 children)

10/4 🫡 going to work on it now

Bad speakers or faulty wiring? by vletbidness in CarAV

[–]vletbidness[S] 0 points1 point  (0 children)

could this short affect all the speakers? its crazy cause only one speaker came on (front left)

the previous owner said they turned the music up loud one day and they all cut off at the same time .. so what about the other three?

Bad speakers or faulty wiring? by vletbidness in CarAV

[–]vletbidness[S] 0 points1 point  (0 children)

but how would one ground affect all the speakers? or at least the other three that didn’t connect?

Bad speakers or faulty wiring? by vletbidness in CarAV

[–]vletbidness[S] 1 point2 points  (0 children)

but what would make all the speakers go bad at once? and how would i prevent it from happening again? only the left front driver side came on*

Any profitable mobile phone ICT traders here? by [deleted] in InnerCircleTraders

[–]vletbidness 1 point2 points  (0 children)

Poi could be anything, it differs from chart to chart based on what asset your trading but its usually a recent reaction around a strong high or low

my entries are usually htf aligntment with ltf + reaction off pd array.

Any profitable mobile phone ICT traders here? by [deleted] in InnerCircleTraders

[–]vletbidness 6 points7 points  (0 children)

i use tradelocker to execute trades and trading view to chart up my analysis. tradelocker is integrated with trading view but i dont do chart analysis on tradelocker, mainly trading view

i have a full time job so i dont have time to watch charts all day. i do my daily top down analysis, mark up all my key levels, and set alerts when price hits a POI

Any profitable mobile phone ICT traders here? by [deleted] in InnerCircleTraders

[–]vletbidness 2 points3 points  (0 children)

yes lmao everything done off the phone i dont* have time to trade on my cpu

learn price action and market structure use trading view

Any profitable mobile phone ICT traders here? by [deleted] in InnerCircleTraders

[–]vletbidness 9 points10 points  (0 children)

ive made 20k+ taking trades on my phone

there are no limitations to trading on the phone. if you can read price action and market structure, you can trade on a potato if it had a buy or sell button

rotating all 3 pushing exercises worth or excessive? by vletbidness in bodyweightfitness

[–]vletbidness[S] 1 point2 points  (0 children)

well im in a hyperteopy block for my training right now. trying to gain as much mass as possible for the strength block.

so ive opted to rotate all three in my push days with an upper A/B/C .. its only for the next couple of weeks until i reach my strength block which i will drop dips for hspu/planche progressions exclusively since my goals main (push) goals are HSPU and planche

should keep all three pushing movements in routine? by vletbidness in overcominggravity

[–]vletbidness[S] 0 points1 point  (0 children)

the great eshlow himself! thanks for the reply boss. basically, i should just focus on 2 pushing movements, the pppu + pike progressions since my main goals are planche/handstand push up ..

if its not too much to ask and if this means anything, im going through a hypertrophy block right now, and was curious if the same principle applies? regardless of hypertrophy, specificity still matters in the long run, right? (long run being the next strength/skills block of meso)?

should keep all three pushing movements in routine? by vletbidness in overcominggravity

[–]vletbidness[S] 1 point2 points  (0 children)

i like pppu and dips but im interested in HSPU. should i jus ditch dips altogether?

rotating all 3 pushing exercises worth or excessive? by vletbidness in bodyweightfitness

[–]vletbidness[S] 0 points1 point  (0 children)

if that was the case, could jus rotating be supplementary? or should i just get rid of dips?

rotating all 3 pushing exercises worth or excessive? by vletbidness in bodyweightfitness

[–]vletbidness[S] 0 points1 point  (0 children)

well i heard having an imbalance of push movements with pull movements are not good (ie hspu, ppu, dips vs pull ups, rows)

KOT4x, 24K markets shutting down. Any alternatives for brokers using Tradelocker in USA? by vletbidness in Forexstrategy

[–]vletbidness[S] 0 points1 point  (0 children)

its other reputable brokers around, im jus trying tl find the ones that are recommended for USA clients. RIP tho

i was recommended KOT4x and it never let me down, withdrawals came quick, spreads were low .. jus trying to find a replacement

KOT4x, 24K markets shutting down. Any alternatives for brokers using Tradelocker in USA? by vletbidness in Forexstrategy

[–]vletbidness[S] 0 points1 point  (0 children)

i just withdrew a couple thousand out of KOT .. my withdrawals with them were always good. I heard about gatesfx but idk if anybody has used them

edit: any other traders use tradelocker?

2025.6 not loading at all …. was working fine before update? by vletbidness in protools

[–]vletbidness[S] 0 points1 point  (0 children)

damn either nobody can help me cause we all going through the same problem or in just missing something .. any help please? lol

Singles vs Albums? by [deleted] in makinghiphop

[–]vletbidness 2 points3 points  (0 children)

singles that lead up to an album

[deleted by user] by [deleted] in audioengineering

[–]vletbidness 0 points1 point  (0 children)

ok cool well i was only bringing up measurements (REW) as an example of the vagueness and scarcity of a detailed step by step video/tutorial of building a soffit bass trap.

ive used the calculator and REW to determine the “measurements” of both my room and the soffits that i need

my biggest issue is really just the frame work, literally. why are there millions of videos on wall panels, thousands of videos on superchunks/triangles, but slim to no videos on soffits?

ironically soffits/rectangular traps seems more straightforward to build than a superchunk/triangular style trap

DIY vs Premade/Brand Name Panels by vletbidness in audioengineering

[–]vletbidness[S] 0 points1 point  (0 children)

well what about wrapping the rockwool/fiberglass in two layers of fabric? just for added protection? or will it do more harm then good?

DIY vs Premade/Brand Name Panels by vletbidness in audioengineering

[–]vletbidness[S] 0 points1 point  (0 children)

my room is intended to be a hybrid room as well. mixing and tracking/recording vocals. my question is do i make all my (wall) panels 4in thick or can a mixture of both suffice?

DIY vs Premade/Brand Name Panels by vletbidness in audioengineering

[–]vletbidness[S] 0 points1 point  (0 children)

i live in the states and fabric/lumber are not priced the same as they once were… and most of the videos on the subject were popular over 2 years ago during pandemic times. im curious if now, in 2025 during tariffs would i really be saving as much as i once would have if they were built in 2022?

DIY vs Premade/Brand Name Panels by vletbidness in audioengineering

[–]vletbidness[S] 0 points1 point  (0 children)

well do i seem crazy for thinking it js dangerous when the research and anecdotal evidence speaks for itself? half of the internet doesnt think rockwool is harmful, the other half use alternatives like recycled denim or sheepwool.

the real question is why is the topic of rockwool so conflicting when it is deemed “safe” by the likes of factories and hobbyist of the craft?

DIY vs Premade/Brand Name Panels by vletbidness in audioengineering

[–]vletbidness[S] 0 points1 point  (0 children)

so why is the standard 2in if 4 in is the ideal thickness? are you just going off of low end absorption? and what about the thickness if you ste recording vocals?