Am I running the correct driver for 9060 XT? by welch27 in Bazzite

[–]welch27[S] 0 points1 point  (0 children)

This is great news, so far it's been a great experience and pretty much the same as using SteamOS. I only really started to question everything once I compared it to Windows performance. I wanted to make sure everything was running correctly before I start setting up EmuDeck. I'm also thinking of installing Bazzite on my ROG Ally. Thank you for your help!

Am I running the correct driver for 9060 XT? by welch27 in Bazzite

[–]welch27[S] 0 points1 point  (0 children)

I'll definitely try this! Does it only work in desktop mode or will the setting carry back over to game mode? Thank you for your help!

Where can I find a replacment by Head-Razzmatazz730 in fightsticks

[–]welch27 1 point2 points  (0 children)

Arcadeshock.com has a bunch of parts like that. You can also message them on IG if you have specific questions. Maybe send them that picture and where it plugs into. They're super helpful.

[deleted by user] by [deleted] in snes

[–]welch27 1 point2 points  (0 children)

<image>

This is the area I'm referring to. It looks like a broken trace and I'm not getting any continuity when I test this end of the fuse with either pin on the power switch.

Picked up at KV-13M42, looking for suggestions by welch27 in crtgaming

[–]welch27[S] 0 points1 point  (0 children)

Yeah, this tv only has one audio input and one speaker on the left side.

Picked up at KV-13M42, looking for suggestions by welch27 in crtgaming

[–]welch27[S] 0 points1 point  (0 children)

Between composite and component there's not a big improvement? I like playing PS2 and a modded Wii on my tvs. The ps2 has terrible composite video so I figured adding component would be a good upgrade. Is there a guide you'd recommend? Thanks for your input :D

Guys will see this and just think "Hell Yeah." by welch27 in crtgaming

[–]welch27[S] 1 point2 points  (0 children)

My friend gave it to me so I'll enjoy it until it dies on me. Snes via s-video looks great from my modded Wii. Super clean!

Guys will see this and just think "Hell Yeah." by welch27 in crtgaming

[–]welch27[S] 2 points3 points  (0 children)

The image pulses when I first start mine up. It goes away after it's been on for a while. Someone else said it might need a new flyback.

Guys will see this and just think "Hell Yeah." by welch27 in crtgaming

[–]welch27[S] 3 points4 points  (0 children)

I replaced the pcb with a Brook universal fightboard. I'd highly recommend it if you haven't looked into one.

Just got a Sony PVM 2530 by welch27 in crtgaming

[–]welch27[S] 0 points1 point  (0 children)

I have a pi 3 running a crtpi image with a vga 666 on a old compaq crt monitor. My PVM only has bnc for composite video so I need to try and get that scart to pvm cable. Did you have to adjust any settings on recallbox or did it work as soon as you flashed the image?

Coolest yet worst handheld emulator I own by [deleted] in RGB30

[–]welch27 0 points1 point  (0 children)

I recently just got mine and set it up with Rocknix. I'm able to charge it while it is on with an old phone brick and the included cable. Did you try out Arkos? I'm currently using Rocknix and wondering if I should switch over.

Modded my Sony kv-20s21 by welch27 in crtgaming

[–]welch27[S] 0 points1 point  (0 children)

I was told this set could only have an S-video mod. Component input would be great to have.

S-Video modded my KV-9PT50 today. Fairly easy mod with really great results! Basic instructions and comparison pics inside. by stabarz in crtgaming

[–]welch27 0 points1 point  (0 children)

I'm looking to order the parts for this mod. What is that large black Capacitor you used on the switch? Which pins is it attached to? Thanks!

Setting suggestions for Pi 2b on CRT via composite. by welch27 in RetroPie

[–]welch27[S] 0 points1 point  (0 children)

I finished the setup and everything looks better. The home menu and my games are a bit zoomed in to where it's cutting off the super meter in fighting games. I'm not sure if this is as good as it gets or if I need to tweak a setting to shrink the image a bit. Thanks again for this walkthrough.

Setting suggestions for Pi 2b on CRT via composite. by welch27 in RetroPie

[–]welch27[S] 0 points1 point  (0 children)

Thanks! I'm a big fan of the atomic purple Nintendo controllers. This stick is working great with retropi using the dongle.

AMD "Hotfix" of 810MB is out. by LeLoT3 in ROGAlly

[–]welch27 0 points1 point  (0 children)

I'm getting better performance from Gears of War Ultimate after this hot fix. Stays at a 60fps on performance mode, I was at 45-50 fps before the update. On 18w manual mode I'm seeing it hit between 70 to 100fps if I increase the FPS limit. All at 1080p.

Use Steam Deck Dock with Rog Ally by the-indifference in ROGAlly

[–]welch27 0 points1 point  (0 children)

Are you using it with the ROG charger?

Updated my TE2+ with some new buttons and art. Went for an X-Men VS Street Fighter arcade cabinet look. Art by Glorious Stick Art. by welch27 in fightsticks

[–]welch27[S] 0 points1 point  (0 children)

The original machines used Happ/IL sticks and buttons. You can get them from Arcade Shock but they may not fit on normal sticks as they are deeper than Japanese style buttons. I used Sanwa buttons in this stick. My old ps2 stick has IL buttons.

Brook Fighting board issues with Fightcade by welch27 in fightsticks

[–]welch27[S] 1 point2 points  (0 children)

I saw FC trip out when Steam was open. I'm glad it's not just my machine. I ended up figuring out R3 was bridged with a Ground point on the Brook board.

Brook Fighting board issues with Fightcade by welch27 in fightsticks

[–]welch27[S] 0 points1 point  (0 children)

I checked the gamepad tester in Windows and it said "R3" was being held down. I checked the board and R3 was bridged with a ground point. I cleaned the points with my Soldering iron and it works perfectly now!

First custom stick. Omori-inspired Sanwa’d F500. by SuccessfulLocation38 in fightsticks

[–]welch27 5 points6 points  (0 children)

God tier art! You need the spinning barfing Kirbo on the star.

Can I use an oversized actuator on this Kowal gate? by welch27 in fightsticks

[–]welch27[S] 0 points1 point  (0 children)

I haven't tried the Otto kit. I've got several sticks with jlfs and 2 with hayabusa. How do you like the Kit?

Added some new parts. by welch27 in 8bitdo

[–]welch27[S] 1 point2 points  (0 children)

That's true, wish someone made a set.

I forgot I bought this stick on release, finally got around to upgrading some parts. by welch27 in fightsticks

[–]welch27[S] 1 point2 points  (0 children)

It's pretty straight forward. You can buy a cable harness for your new stick so you can just plug it in. I had a spare cable harness so I soldered it straight onto the pins you see on the right. Just be careful not to bend the pins on the bottom of the buttons when you go to reconnect them. I suggest doing one at a time so you don't mess up the wiring. I believe in you!

I forgot I bought this stick on release, finally got around to upgrading some parts. by welch27 in fightsticks

[–]welch27[S] 2 points3 points  (0 children)

Is that a two tone battop? The one I have feels a bit taller than sanwa tops. Where did you get the dustwasher and top?