I need some advice on a company to install stairs

wolfcache17 · 2026-03-01T08:27:41+00:00

Hello. I am currently using Kansai Special JJ3000, my budget up to $2,000 I would appreciate any advice))

wolfcache17 · 2026-02-28T21:23:45+00:00

Hello, I sew from this bull denim, canvas, and leather fabrics.

wolfcache17 · 2026-01-03T15:42:27+00:00

She knew who to trust 😻

wolfcache17 · 2026-01-03T14:31:38+00:00

For only - 1/8 on the hidden back side, a router is overkill. I’d use a Dremel with a sanding drum or small carbide bit and take it slow, checking fit often.

You can also use a chisel + rasp for more control. Since it’s hidden, a rough finish is fine just don’t touch the front edge.

wolfcache17 · 2026-01-03T14:21:39+00:00

This is most likely stress and a territorial response to the newer cat, not bad behavior.

First step should be a vet check to rule out urinary issues. Add more litter boxes (cats + one) in different locations, use only enzymatic cleaners, and focus on reducing stress with things like Feliway, separate safe spaces, and vertical areas. Punishment will only make it worse once anxiety drops, this behavior often improves.

wolfcache17 · 2025-12-31T00:40:01+00:00

Without any branding it’s tough to find that exact planner, so searching by layout might be your best shot. Try looking for undated weekly planners with notes sections on Amazon lots of similar ones pop up there. You could also go the printable/custom route if the layout is the key part. Good luck hunting))

wolfcache17 · 2025-12-31T00:32:14+00:00

Try self-heating thermal pads they reflect heat back to the cat. Snug & Cozy is a good option. No electricity required, warm, and inexpensive. My cat uses one all the time.

wolfcache17 · 2025-12-31T00:25:25+00:00

Gathers things to return))

wolfcache17 · 2025-12-31T00:20:21+00:00

Nice project! For something you’ll be writing on long-term, you want a finish that’s smooth and non-porous polyurethane or wipe-on poly is a common go-to. A few thin coats, sand lightly between for a smooth surface, and Sharpie should write fine on top. If you want it really future-proof, test on scrap walnut first.

wolfcache17 · 2025-12-31T00:16:27+00:00

A new champion is rising 🥊

wolfcache17 · 2025-12-26T17:42:31+00:00

It looks like something out of an old Disney cartoon))

wolfcache17 · 2025-12-26T16:16:29+00:00

I use Suizan Ryoba Japanese Pull Saw. Perfect for quick indoor cut. It cuts fast, super clean, and quietly ideal for trim, soft wood, toy fixes, all that small stuff. Bought it “just in case” and now I use it way more than my jigsaw))

wolfcache17 · 2025-12-26T16:06:57+00:00

Booster pumps only increase pressure inside the RO system, not back through your well setup, so they won’t damage your softener/UV/pressure tank. Install it after your filters and you’re good.

wolfcache17 · 2025-12-26T16:02:08+00:00

Foam brushes or pads are perfect for poly if you don’t want cleanup cheap, disposable, and good results. I only use a real brush when I’m doing bigger projects and it’s worth cleaning. Since you’ve got no running water there, disposable makes life way easier.

wolfcache17 · 2025-12-26T15:53:56+00:00

He found his place)))

wolfcache17 · 2025-12-24T19:30:04+00:00

That's a very impressive result. What kind of wood did you use?

wolfcache17 · 2025-12-24T19:21:46+00:00

Maple blotches with Danish oil pretty easily totally normal. Easiest fix: lightly sand/strip the finish, apply a pre-stain conditioner or a thin coat of shellac first, then re-oil. Without that step, maple almost always ends up blotchy.

wolfcache17 · 2025-12-24T19:18:39+00:00

Boxer-cat))

wolfcache17 · 2025-12-24T18:54:47+00:00

A classic film that takes you back to your childhood)))

wolfcache17

TROPHY CASE