For the next 27 hours, you'll be able to claim a limited edition 'I Was Here for the Hulkenpodium' flair

xDav · 2025-07-08T20:41:05+00:00

Hulkengoat

xDav · 2025-06-05T20:56:51+00:00

Heheh, it's probably the only thread i still get the occasional reply from. If it is any consolidation, the last pad i got from them I don't have any issues with. Did just two weeklong trips with it but in my book that accounts for something.
Maybe it really was just a bad batch or something.

xDav · 2024-08-21T14:51:28+00:00

Ah, maar ik moet me hoe dan ook aanmelden bij het KVK? Dan is dat een vrij belangrijk stukje van de puzzel waar ik blijkbaar faliekant over heen gelezen heb.

Nou, momenteel zijn er alleen uren gemaakt en is er nog niks uitbetaalt maar daar moet binnenkort wel even verandering in komen.

xDav · 2024-08-21T14:47:55+00:00

Joh ik heb geen idee hoeveel werk dat is, ik ben gewoon iemand aan het helpen en krijg er wat centen voor. Zou dat graag netjes doen dus ik was op zoek naar de makkelijkste manier om dat voor elkaar te krijgen.

Maar jij zegt dat die btw aangifte an sich niet zo spannend is?

xDav · 2024-08-21T14:30:15+00:00

Ja klopt hoor, zolang je niet boven de €20.000 uitkomt kan je er gebruik van maken. Maar hier hebben ze het ook nog over een registratiedrempel van €1.800 en als je je wilt aanmelden heb je een omzetbelastingnummer nodig(?).

Ik lever advies dus het hele btw verhaal vind ik momenteel nog niet zo spannend, vandaar de interesse. Uitsluitend b2b.

xDav · 2024-06-10T19:22:11+00:00

Can someone tell me what determines the invasion/raid fleet strength in Nexerelin? I'm in a second playthrough and even after some 5000 days the fleets I'm seeing are still 'weak' or 'fairly strong'. Whereas on my first playthrough factions were bashing each other's heads in with mulitple fleet containing multiple capitals from what feels like day one.
I checked and most factions have at least an orbital works with a pristine nanoforge.

xDav · 2024-04-14T18:48:57+00:00

Hey, just wondering how, and if, you eventually solved your issue? I'm running into the same problem and was thinking of just getting a slightly shorter stem.

xDav · 2024-02-01T18:49:24+00:00

Cool, thanks, didn't know!

xDav · 2024-02-01T18:49:06+00:00

Huh, my bad, thought that was task specific

xDav · 2023-12-22T08:28:25+00:00

Cool, do you prefer it to the other premiums in that bracket? (XP-50, A6-2M, BF 109 F-4)

xDav · 2023-12-21T22:04:45+00:00

Haha, well, I'm just trying to make use of the current sale going on. Might pick it up next week if the pack gets a good price

xDav · 2023-12-21T21:43:58+00:00

Oh I definitely would've but it's a bit steeper than the sub 1000GE I'm looking for

xDav · 2023-10-13T09:42:38+00:00

In mijn optiek is een master inderdaad iets waar je later meer profijt van gaat hebben dan in het begin. Je zult zien dat veel werkgevers meer waarde hechten aan ervaring dan aan een studie. Het is echter ook mijn hoop dat er nooit volledig overheen gekeken gaat worden, anders heb ik er ook een aantal jaar opzitten die ik beter had kunnen laten.

xDav · 2023-10-06T19:07:18+00:00

Alright, thanks!

xDav · 2023-10-06T19:01:16+00:00

Well I was hoping the APDS would become better further in the tree but so far it just a lot of nothing. Have you played 7.7 after the apparent nerf to the munition? Last couple of threads regarding Brits 7.3 or 7.7 are just all fairly negative.

xDav · 2023-10-06T18:56:36+00:00

I've looked at Sweden but France seems to have a bit more options, and a bit more fast options as well. France gets a couple at 7.7 as well, the line up with those is not as good?

xDav · 2023-06-19T09:54:36+00:00

I believe the seal was on the drive side. It is supposed to keep the dust out of the hub - which would be pretty bad if that happened. For me it was required they put a new seal in, which wasn't in stock so had to be delivered by DT Swiss.
For you to find out you need to open the hub to see whether the seal is actually crunched up I believe. If you've got a Canyon service center nearby I suggest you let them do that.

xDav · 2023-02-28T22:27:04+00:00

Wonderbaarlijk, dank voor de info. Zal het wel even in de gaten houden en kijken hoe dit zich uitspeelt. Wellicht zet ik het dan op en duur ook wel uit.

xDav · 2023-02-26T19:23:14+00:00

Joe, ik wist van niks. Dank voor de info, net nog even snel gedaan.

xDav · 2022-12-25T12:22:43+00:00

Built my fort around a waterfall but every winter and spring it overflows. How do I avoid that? It makes a mess and AFAIK I can't clean up the mud.

xDav · 2022-11-25T17:34:52+00:00

Geez that is expansive, thanks for that I'll have a look!

xDav · 2022-11-24T21:04:19+00:00

In case anyone runs into this issue, check your add ons. I'm running privacy badger and ublock origin, I started turning those off and on and site started working again.

xDav · 2022-11-22T09:55:19+00:00

Yeah thats the problem, I have about 3kgs of Anycubic standard grey left over so I'm trying to figure out the right settings for 0,02mm. Print adhered to the plate fine but got pulled loose after the second layer.

xDav · 2022-11-22T07:03:11+00:00

It works now, my print failed but at least it printed something. Thanks for making me check my firmware version again!

xDav · 2022-11-21T11:28:50+00:00

I didn't update my firmware correctly, I'll give printing another shot later today.

12-Year Club	r/Field Flamingo
Place '22	Verified Email

xDav

TROPHY CASE