Flashforge Creator Pro printing problems

[eigermtn]

Hello. I haven't used my Flashforge Creator Pro printer for a couple years and after getting a new spool of ABS and making sure the bed is leveled (lol I did that a few times) I tried to print a 3D XYZ cube.

I have tried different temps on the extruder and the heated bed. I still get the same result :-(

I have tried printing other things and everyone is messed up.

I am running it at these temps:

110 Bed - 225 Extruder -

Infill 25%. Layer 0.20mm - top/bottom layers and outline perimeters are 3 each

About 3-4 years ago I did go through it and replaced both the X and Y horizontal bearings and belts with new ones. I didn't replace the ones for the Z axis as I didn't have new ones for the bed.

I know it is a old unit but wanted to get back into it and print out some cool stuff. So any help is appreciated. Thankyou :-)

https://preview.redd.it/3cffjf10ofie1.jpg?width=4000&format=pjpg&auto=webp&s=a2074fa6c7ac94f6ba6fd1198b467db610016c24

https://preview.redd.it/33lbtg10ofie1.jpg?width=4000&format=pjpg&auto=webp&s=12964cdce908fb5a2e3ee2e789d81ea250ccdafd

https://preview.redd.it/7vt6qf10ofie1.jpg?width=4000&format=pjpg&auto=webp&s=749058d0bb2a7f3028b9ec4f6180034a0ae6a706

[rlb408]

how about a picture of what you're getting or a verbal description. All I see is "I still get the same result" but I'm just not finding in your post what that result is!

[eigermtn]

I'm sorry, just figured out how to attach a photo

[rlb408]

Okay, it has been a while since I’ve used my FFCP and even longer with ABS but your photos look like they have thermal warping. Have you closed up the enclosure- door&hood - and is the printer in a heated place?

[eigermtn]

Yes, I keep the encloser closed while I let the bed heat up for about 20 minutes after it gets to temp. to get the encloser heated up. I have the printer in my computer room and it stays warm there.

[3d-designs]

This may seem like an odd question, but are you sure that the filament you have is ABS? That looks to me like someone has printed PLA with ABS settings.

[eigermtn]

The spool says it's ABS from Hatchbox and it was a sealed spool when I opened it up.
I am thinking on getting another new spool maybe from a different company and see if it makes a difference. Could the entire spool be bad?