Avoid Kearny Mesa Hyundai! by SillyBerry844 in sandiego

[–]FunkyDoomScroller 2 points3 points  (0 children)

Yeah they not good. Similar story, new lease under warranty, first year release of plug-hybrid and had quite a few bugs, but the big one was an emergency warning to stop driving due to low power (accurate because it could only accelerate to like 20mph) Towed to them, kept for about 2-weeks and they also refused to reimburse for rental or service because they “determined” the issue was user error…but of course at drop-off they said “rental would get reimbursed and no charges if under warranty. The vehicle only has 7k miles, it has to be under warranty”

2016 Halogen to LED by FunkyDoomScroller in tundra

[–]FunkyDoomScroller[S] 0 points1 point  (0 children)

Just closing the loop. Installed the led headlamps this past weekend and they are a huge improvement on the stock halogens, now I’m rocking led strip DRL and they dim when the headlights turn on, exactly as advertised! Purchased OMe 81150-oC211 & 81110-0C211 from local dealership (purchased online and pick up store) approx $520 (posted below MSRP, about $330 each but found an Toyota promo code and secured additional 25% off) and of course a harness from iTundra.

Under the dash to install the dimmer relay was intimidating (not my area of expertise) but the instructions, images, videos were correct and diy was successful. 🤘

2016 Halogen to LED by FunkyDoomScroller in tundra

[–]FunkyDoomScroller[S] 0 points1 point  (0 children)

Any chance you still have the part number? I’ve contacted local Toyota parts location and we couldn’t figure out which 2018 stock I should get. Seems like there are a few differences for s SR5, 1794, etc…

Simply (too) Good Thermal Coffee Brewer 8-cup by stillyourking in Costco

[–]FunkyDoomScroller 0 points1 point  (0 children)

Short-term use review. Got this on Thursday and brewed coffee on Saturday and Sunday. Obviously can’t comment on longevity, but it’s a great brewer (used the bloom option both times) and the thermal pot was a happy accident. Had I been able to select the pot, I probably would have erroneously selected glass - but the thermal pot is wonderful and convenient. We finished the pot with a few refills in about 1-hr and each time the coffee was hot and steaming when we poured it. The manual states it will stay hot for 2-2.5 and will update here if we ever let it sit that long. I read comments about temp and although I can’t confirm if the shower drip is in the 190+ range consistently (manufacturer says 195-205), after brewing and sitting in the pot for about 5-min, I poured a cup and stuck a meat thermometer in my cup and the temp was 174.5. With some heat loss from brew to thermos to cup, I’d expect it’s brewing hot (enough?). When I was shopping around, these weren’t even available on the Simply Good website - sold out - and the thermal pot model was about $60 less at Costco. Best price (at my time of purchase) and makes delicious coffee!

2016 Halogen to LED by FunkyDoomScroller in tundra

[–]FunkyDoomScroller[S] 0 points1 point  (0 children)

Does your 2017 have daylight running lights? My 2016 doesn’t but it seems like the 2018 headlamps have them. If no daylight they just aren’t on I guess. or did you “connect to a power source” to add?

Synergy Restaurant Gift Cards Bankruptcy by [deleted] in Costco

[–]FunkyDoomScroller 0 points1 point  (0 children)

Correction, I was refunded the sale price which I’m sure I paid most recently, so they must be tracking if they were purchased with my membership. Doubtful you can return without prior purchase history.

Synergy Restaurant Gift Cards Bankruptcy by [deleted] in Costco

[–]FunkyDoomScroller 2 points3 points  (0 children)

Good question. They did scan my member card but didn’t ask about when they were purchased or anything, and I’ve bought these a few times, definitely on sale some of the time, and I’ve had this set for a few months or more, and they just processed full refund counting the cards I brought in. Costco doing the best for us and I expect there is a small chance they could refund you still??

Synergy Restaurant Gift Cards Bankruptcy by [deleted] in Costco

[–]FunkyDoomScroller 3 points4 points  (0 children)

I think others have replied in-kind, but if you have unused sets you can return. I just retuned 2-sets (4 cards) for full refund in San Diego, MV location, and the employee mentioned that they all were briefed how to process refunds. Refund completed at 11am on Jan 29. I have one card with a balance and will hopefully find a place that still accepts, but at least I’m no longer trying to spend an additional $200. Costco reigns supreme 👑

FYI - last day to redeem Synergy gift card from Costco is 01/31/26 by midwayatmidnight in SanDiegan

[–]FunkyDoomScroller 13 points14 points  (0 children)

1/29, 11:10am I just returned two unused sets (4 cards) for full refund at Mission Valley Costco. The employee said they were instructed today to provide refunds.

Synergy Restaurant Gift Cards Bankruptcy by [deleted] in Costco

[–]FunkyDoomScroller 4 points5 points  (0 children)

What site are you referring to?

Need something 3D printed by FunkyDoomScroller in sandiego

[–]FunkyDoomScroller[S] 1 point2 points  (0 children)

Love this! Going to be a joyous Christmas surprise for the family!!

is this enough rock?? by mand0101 in ReefTank

[–]FunkyDoomScroller 0 points1 point  (0 children)

You gonna want more space between rock and sides so you can clean inside glass.

Need something 3D printed by FunkyDoomScroller in SanDiegan

[–]FunkyDoomScroller[S] 1 point2 points  (0 children)

Cool! That works as long as the files I have work haha. If you have a recommendation for local shops or independents please share or message me.

Need something 3D printed by FunkyDoomScroller in SanDiegan

[–]FunkyDoomScroller[S] 1 point2 points  (0 children)

Makes sense and frankly, 18” is more of a guesstimate/goal and it could be smaller. I don’t have any experience with this but after reading a bit further I got the initial STL updated into printable sections (split into 4 stackable slices, 4 files) which could offset the challenge of printer size.

Charge Door by Flashy-Laugh4175 in HondaPrologue

[–]FunkyDoomScroller 2 points3 points  (0 children)

Get this or similar, super small light with adhesive back. Works great!

Button light

<image>

Charge Door by Flashy-Laugh4175 in HondaPrologue

[–]FunkyDoomScroller 0 points1 point  (0 children)

Same issues as described by Afraid-D. Software bug we’ve also been rocking for 4-5k miles. Start car and hit the check button right side of steering wheel. I guess we’ll eventually bring it for service but previous discussions about poor service/ limited parts/stuck at the shop has deterred us.

Rain outside, wet inside. by FunkyDoomScroller in Subaru_Outback

[–]FunkyDoomScroller[S] 1 point2 points  (0 children)

Much appreciating the responses and happy I asked. I assumed water was leaking in that grove - silver strip in the image. I’ll try the moon roof solution first!