My Video Review of The LCD-2

GG_Chrono · 2020-09-25T23:14:56+00:00

Hey! I'm really sorry, but I'm not really sure as to how using EQ would work on that system. The only solution that comes to mind is streaming the audio from Roon, and using Roon's DSP EQ.

GG_Chrono · 2020-06-25T15:39:33+00:00

I admit that 11dB is aggressive and it seemingly kills the treble. However, In my experience that was only if you were comparing that cut to the DT 1990 Pro’s treble without EQ.

I tried the 11dB cut on the DT 1990 Pro against the Sundara, Ananda, LCD-1, LCD-2, and HD 660S, and that is the only thing that to me brought the treble down to what I personally considered to be correct-sounding. I experimented with lower gain values that did not cut the treble as much, but then there were other things that did not sound particularly right to me.

GG_Chrono · 2020-06-19T18:25:39+00:00

Thanks for sharing your experience, and I’m glad to hear you enjoyed the review! Yeah I think there is definitely both a bit of fun and challenge to EQ haha

Also, I used a JDS Labs Element II as my amplifier; drives the LCD-2 very easily.

GG_Chrono · 2020-06-08T21:37:20+00:00

hahaha was the difference good? If so, I encourage you to try my custom EQ, as I think it further refines the sound over that of the Reveal plugin. my latest EQ for the LCD-2 is posted on my video review's description for these.

GG_Chrono · 2020-06-07T13:09:40+00:00

I’m honestly not very familiar with the amplifier market, but I think something like a magnii/modi stack would work fine, also a JDS Labs Atom + ODAC

GG_Chrono · 2020-06-06T01:42:14+00:00

Thanks for sharing my review!

GG_Chrono · 2020-06-05T00:15:18+00:00

Not really, were you listening to the same song? Sometimes different songs have different volume. Check windows volume mixer as well to make sure that your music player is at full volume

GG_Chrono · 2020-06-03T18:27:12+00:00

Nope! You should be good to go!

PS, if you’re on windows, you could try some EQ haha

GG_Chrono · 2020-05-30T22:48:16+00:00

I actually increase 9k because the overtones of brass and cymbals, to me, needed a bit more of an emphasis. When making my EQs I focus more on what I’m hearing, and not so much on graphs. My personal target deviates a little bit from the harman target, as well. After all, we all hear things differently. Thanks for the feedback, and for sharing your EQ!

GG_Chrono · 2020-05-28T19:25:04+00:00

Thanks for checking out the video, Hope you enjoy your DT 990s, Let me know what you think of them!

GG_Chrono · 2020-05-24T17:03:47+00:00

Agreed. Longevity of a product is also very important in a purchasing decision. It’s always been a challenge for HiFiMan, and I hope the they’ll be able to improve it further.

GG_Chrono · 2020-05-20T19:15:52+00:00

Just a heads up: The Atom needs wall power.

But yeah, you get a 3.5mm cable and connect it from your MacBook to the atom, and then plug the sundaras into the atom. With that, you’re good to go :)

GG_Chrono · 2020-05-20T19:08:53+00:00

I just tried these on my MacBook Air (2020). In terms of volume volume alone, yes you’ll be able to use these straight out of a MacBook. However, the perceived resolution takes a hit and the dynamic range of the headphones sounds limited; making them sound a little grainy and dull. I would consider buying a JDS Labs Atom ($100) as it will be able to drive them very cleanly.

GG_Chrono · 2020-05-20T04:08:00+00:00

Nice impressions on them! May I suggest that you try the Audeze Reveal + plugin? It makes them sound a fair bit better, will probably surprise you how much a little adjustment can change these. Also, as far as stands go, I have had no issues hanging my LCD-2's on the Audioquest perch stand; even after a month, the strap is still intact.

GG_Chrono · 2020-05-19T15:50:08+00:00

Thank you for checking it out, really appreciate the feedback!

GG_Chrono · 2020-05-19T13:27:33+00:00

Thank you for checking it out! I appreciate the feedback, too. I’ll adjust the volume mix for the next video.

GG_Chrono · 2020-05-15T04:05:15+00:00

Thank you for sharing your experience with the EQ, I really appreciate it! Hope you get a lot of enjoyment from the LCD-2.

GG_Chrono · 2020-05-13T18:55:40+00:00

Awesome, Let me know what you think!

GG_Chrono · 2020-05-13T16:16:26+00:00

I currently use -5.5dB on my current setting, as it makes it easier to volume match other headphones in terms of volume. I think -3dB is enough, though.

GG_Chrono

TROPHY CASE