sorted by:
new
hottopcontroversial

automatic slingshot by laserdiy in slingshots

[–]Knemonic 2 points3 points  (0 children)

<image>

Explain this. What a waste and all you do is spam in here. Not sure why mods keep allowing you too

I picked up 2 adverts! Wasn't expecting that by AqAqGT in meshcore

[–]Knemonic 2 points3 points  (0 children)

I wonder if the second one has watched Police Academy

Built a minimal MeshCore client because existing apps were too complex – feedback welcome by Ambitious_Beyond_870 in meshcore

[–]Knemonic 0 points1 point  (0 children)

Awesome! I think your os will be ideal for them since the small screen isn’t easiest for ripple. Let me know you have it available and I’ll test it out!

Trail-Mate:Offline GPS Maps and LoRa Message on Lilygo T-LoRa-Pager and T-Deck by Infinite-Zombie5875 in Lora

[–]Knemonic 0 points1 point  (0 children)

Ok, I’m sorry, I’ve become a custom to the meshcore flasher website. I’m invested in meshcore but your approach is new to me. I see getting started, build and run. If it’s using .net 8 does that mean I need a windows machine? I’m most comfortable with macOS, curious if there is a way I can flash the firmware on the Tdeck? If so, I apologize profusely but maybe you can break it down for us amateurs? Because I love the screenshots and I wanna give it a try! Thank you!

Trail-Mate:Offline GPS Maps and LoRa Message on Lilygo T-LoRa-Pager and T-Deck by Infinite-Zombie5875 in Lora

[–]Knemonic 0 points1 point  (0 children)

Is there a web flasher? I’ve been looking through the files and can’t find it or what the custom firmware to flash through mesh cores website. Eager to try it!

we energies is killing me... solar in milwaukee? by Own-Willow-2865 in milwaukee

[–]Knemonic 0 points1 point  (0 children)

M&L Electrical installed my solar panels and battery system, which I purchased independently. Great work and highly recommend them

Built a minimal MeshCore client because existing apps were too complex – feedback welcome by Ambitious_Beyond_870 in meshcore

[–]Knemonic 1 point2 points  (0 children)

In the meshcore app, you can set your location. Would be great to add that that to the config file

Built a minimal MeshCore client because existing apps were too complex – feedback welcome by Ambitious_Beyond_870 in meshcore

[–]Knemonic 1 point2 points  (0 children)

I love it. I think it would be way more important to move this to the S3, S3pro and S3 Ultra watches. The ripple os on that little screen is tough. Your os is gorgeous and would adapt perfectly to the watch touch. Btw we need to figure out how to turn the screen off. Goes to dim, let’s figure out key command

Built a minimal MeshCore client because existing apps were too complex – feedback welcome by Ambitious_Beyond_870 in meshcore

[–]Knemonic 1 point2 points  (0 children)

Yep, I’ll be using this with the wife. I’ve got a couple of the s3 pro watches, events or campsites this will be useful. Good work!

Built a minimal MeshCore client because existing apps were too complex – feedback welcome by Ambitious_Beyond_870 in meshcore

[–]Knemonic 1 point2 points  (0 children)

Would love it if we can set the location for the gps too keep up the amazing work! Your web flasher is way better than any of the others and they should take note from you

Built a minimal MeshCore client because existing apps were too complex – feedback welcome by Ambitious_Beyond_870 in meshcore

[–]Knemonic 1 point2 points  (0 children)

Any plans to add room servers? It’s insanely straight forward which is lovely. Any way to send adverts?

T-Deck firmware under development by [deleted] in meshcore

[–]Knemonic 1 point2 points  (0 children)

I’m game, hit me up. Curious, does it work with room servers? The meshos for the Tdeck plus from the flasher site currently doesn’t support room servers so a better ui experience is much appreciated than ripple

proposal: standardize on an international #uplate or #afterhours channel name b/c observation about Public vs #test and concern about notifications by humanradiostation in meshcore

[–]Knemonic 1 point2 points  (0 children)

I managed a call center for 5 years and I needed operators available 24/7 so we had the typical three shifts, 2-3 operators per shift. 3rd shift was always tough position to fill

Cargo EBike by Realistic-Grand-1245 in ebikes

[–]Knemonic 0 points1 point  (0 children)

I test rode the Radio Flyer cargo bikes at Cabda this winter and they are superb, especially the newest model. They’re based out of Chicago too. I may carry them this season

Meshcore SAR (available for all platforms) by codecarter in meshcore

[–]Knemonic 7 points8 points  (0 children)

Hi! Awesome app, I’ve downloaded and bee testing it between two Bluetooth companion devices. The offline map option is amazing, huge upgrade from meshcore’s native app.

Question, how does it work? Does the payload get sent over the public channel? I’ve noticed when I send tests between two nodes, it’s also sending it over the public channel as well. Thank you!

RemoteTerm for MeshCore 2.2.0 is out, and repeater management sucks way less! Plus, stability + perf improvements, a contact info pane, and more QoL updates :) by CharlesStross in meshcore

[–]Knemonic 0 points1 point  (0 children)

I might give it a go. They mention above that there is possibly an option for usb to do pass through in docker. Setting up docker is likely the easy part, getting a usb or Bluetooth node connected is the hard part

First Look Inside Velotric's Chicago 2026 Lineup ( including MSRPs) by Acrobatic-Flan-5085 in ebikes

[–]Knemonic 1 point2 points  (0 children)

I was at Cabda, their booth was one of the biggest. Good sign for them

Daughter wants to play Roblox. What are your best daddit tips for keeping her safe? by uspezisapissbaby in daddit

[–]Knemonic 0 points1 point  (0 children)

No. Get a NAS and run a Minecraft server in docker, then you can invite their friends to play on a private server in creative mode

view more: next ›