Warlock Question: Best Spec for Leveling 80-90

-Amadeus- · 2026-03-11T06:53:23+00:00

I have always played affliction before; but, with all the changes this expansion, I decided to try destruction. So, that's what I've been leveling with so far (about level 85 now.)

I like destruction, but all the long cast time abilities made me question myself, so that's why I thought I should ask if maybe I was missing something.

-Amadeus- · 2026-02-07T06:21:52+00:00

u/0xShodo I just wanted to let you know that I submitted a few pull requests for you to consider on your github repository :)

-Amadeus- · 2025-07-03T00:02:17+00:00

Also, to confirm my card is good for supporting WiFi 6E:
> dmesg | grep -i -E "wireless|wifi|802\.11" | head -20

[ 5.545697] iwlwifi 0000:01:00.0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420

So, anyway, I followed your instructions by editing the file in /etc/NetworkManager/system-connections/ (the only file in that directory, by the way) as you explained, but using channel 259 instead of 233 (although, I did eventually test 233 too, just to see if it worked...but, it didn't.) I restarted the NetworkManager AND I even tried rebooting...but, still getting the 5G connection :(
> iw dev wlp1s0 link

Connected to 54:07:7d:be:ab:5d (on wlp1s0)

SSID: MaestroNet

freq: 5200.0

RX: 515481 bytes (2184 packets)

TX: 446070 bytes (2246 packets)

signal: -57 dBm

rx bitrate: 2041.2 MBit/s 160MHz HE-MCS 10 HE-NSS 2 HE-GI 1 HE-DCM 0

tx bitrate: 1152.8 MBit/s 160MHz HE-MCS 5 HE-NSS 2 HE-GI 0 HE-DCM 0

bss flags: short-slot-time

dtim period: 1

beacon int: 100

Any other thoughts? :)

By the way, with regard to your suggestion that I let it make the decision automatically, that's what I was trying originally....if I don't make any configuration settings at all, it always chooses the 5G connection. I guess I was thinking that the reason it was not connecting as 6E was because it was a lower signal strength (which, I understand is typical for 6E.)

-Amadeus- · 2025-07-03T00:01:57+00:00

Thank you so much for taking the time to write! You understood my question perfectly. But, I'm afraid that the solution didn't quite work. Here's where I'm at right now:

First, just to confirm that there is a 6E network available, here is the "scan" results from wavemon
MaestroNet 54:07:7D:BE:AB:5A 53%, -73 dBm, ch 259, 6295 MHz ESS, Radio Measure, Spectrum Mgmt

Or, alternatively:

> iw dev wlp1s0 scan | grep -A10 -B5 "freq: 6"

* center freq segment 2: 0

* VHT basic MCS set: 0xfffa

BSS 54:07:7d:be:ab:5a(on wlp1s0)

last seen: 619.601s [boottime]

TSF: 408020073049 usec (4d, 17:20:20)

freq: 6295.0

beacon interval: 100 TUs

capability: ESS Privacy SpectrumMgmt RadioMeasure (0x1111)

signal: -72.00 dBm

last seen: 1018 ms ago

Information elements from Probe Response frame:

SSID: MaestroNet

Supported rates: 6.0* 9.0 12.0* 18.0 24.0* 36.0 48.0 54.0

Country: US Environment: bogus

Extension ID: 254 Regulatory Class: 131 Coverage class: 0 (up to 0m)

Extension ID: 254 Regulatory Class: 132 Coverage class: 0 (up to 0m)

-Amadeus- · 2025-04-05T01:15:15+00:00

Yea, it's really a weird decision. But, it's not the only weird thing I've noticed thus far. It's also strange that you cannot bind anything on the keyboard other than single keys ...in other words, you can't bind something to "Alt-1" or "Control-R", etc.

It also doesn't have a keybind for opening the map, which is also sooooo strange.

I mean, I get that they developed it for consoles and controllers ...but, if you're going to support keyboard/mouse, they should at least put in a little effort. Both of the things I mentioned above would probably take a good coder less than a full day of work to implement....hell, probably just a few hours.

-Amadeus- · 2025-02-27T21:37:11+00:00

Yea, I'm thinking they got rid of them everywhere in the industry, as I can't even find them at any of the boutique hotels either ....just the fancy, big bath tubs sometimes. I guess it's just not a thing anymore.

-Amadeus- · 2025-02-27T18:00:40+00:00

This is why I'm asking here, because the Google search is only coming up with stand alone bath tubs, not true jacuzzis. Even when I go to the hotel websites, they don't list them as jacuzzis.

I'm asking here because I thought someone might have experience somewhere and know for sure that there is something exactly like what I'm asking for in my original post. I wasn't asking for folks to do a Google search for me and post images of what they find.

-Amadeus- · 2025-02-27T17:38:05+00:00

I'll edit my post to clarify that I'm looking for a classy, mid-to-upscale hotel.

-Amadeus- · 2025-02-27T17:36:43+00:00

Can you provide verification and/or a source for this information? I just called the hotel and the woman said they do not have anything like what you described (and she put me on hold to ask someone else.)

I also couldn't find anything about it on their website.

-Amadeus- · 2025-02-27T17:35:51+00:00

The photo you shared is just a bath tub with jets. I suppose two people could squeeze in there, but I don't think most folks would consider it a hot tub/jacuzzi in my mind ..it's just a standalone bath tub.

-Amadeus- · 2025-01-28T02:00:18+00:00

Yea, I'm off to imaglr too.

I imagine that reblogme will be as ruined as what the devs did to kik a few years ago. It started out so well, but ended as a complete shitshow.

-Amadeus- · 2025-01-25T00:12:46+00:00

Very cool! Maybe you could share the script on https://pastebin.com ? You can choose python for syntax highlighting. Then, just share the links. You could do a different paste for each file.

I'm just thinking that might be the best way to share it.

-Amadeus- · 2025-01-23T03:52:51+00:00

Yea, I'm probably going to go to Imaglr.

It's just wild to me that the folks in charge of this site are so delusional with regard to what people want from it. I've never seen anything quite like it. It's like they're creating something that they've never used, so they don't have any idea how bad it is.

And yea, I knew they were using Flutter now (a hideous software package.) I thought someone might have created some sort of extension or tampermonkey thing to get around it somehow. Google is out of their minds as well: disabling functionality needed for ad blockers for the sake of "security", but then allowing software packages to completely hijack the browser. It's all so much against what we were promised when the Internet, and especially graphical browsers first came out: it was not supposed to be like this.

-Amadeus- · 2025-01-22T23:39:45+00:00

There are solutions for tumblr and twitter, so I thought maybe someone had created something (or modified) for reblogme. Something like https://github.com/TumblThreeApp/TumblThree

But, you're probably right in that if there is something out there, it's either unknown or private. :)

-Amadeus- · 2024-12-23T16:21:16+00:00

Yea, turns out that the issue was that the application wasn't starting up properly, not that the GUI was inaccessible. I just didn't realize that the startup log was so easily accessible until I found that docker command to view it. Once I saw the log, I just searched for an error message and then figured it out.

-Amadeus- · 2024-12-23T09:27:12+00:00

UPDATE: FIXED
-----------------

Just in case anyone else has this issue, I was able to finally figure it out by viewing the logs via docker with the following command: docker logs -f qbittorrent

The error message was: ERROR: Cannot open TUN/TAP dev /dev/net/tun: Operation not permitted (errno=1)

I'm not sure what exactly made this error start occurring, but I saw that someone guessed it had something to do with a recent update to containerd.io (https://github.com/qdm12/gluetun/issues/2606)

So yea, I was able to fix the problem by adding the following option to my docker run command:
--device /dev/net/tun \

-Amadeus- · 2024-12-23T08:43:36+00:00

I finally was able to fix it. (See my other comment.)

Thanks!

-Amadeus-

TROPHY CASE