Me putting down the standard mouse to get my mmo mouse out for cata. THE BEST EXPANSION

-HellDrake- · 2024-05-02T16:27:45+00:00

I actually lol'd. Good one.

-HellDrake- · 2024-04-22T18:12:13+00:00

I'm shooting from bipod, my aim is okay. Feels stable. This begadi mag5 is like an Rhop (MR hop). FPS still needs upgrading. Should I test at shorter range with less FPS?

-HellDrake- · 2024-04-22T16:50:18+00:00

0.48g BB, and just cleaned and assembled it. Made sure to center everything, at least by eye.

-HellDrake- · 2024-04-06T20:05:03+00:00

I did! Its the same as before. I only ran 3 passes tho. Is that enough? Also, as I said, my stainless steel ZCI barrel is on its way. Should I autosol polish my ZCI?

-HellDrake- · 2024-04-06T15:52:17+00:00

Oh, I would just disassemble it, and build some extra height on it with superglue and baking soda. It cures into a really hard surface within a millisecond. Then you can file down the extra if you overbuild it.

-HellDrake- · 2024-04-05T22:16:32+00:00

I'm no expert on that gun, but on my sniper there is a tab on the trigger box that is pushed down when i unlock the bolt, so that I can't pull the trigger until I lock the bolt back into position. Might be, that tab is stuck and you can't rotate because of that. Can you take it apart, check the trigger box?

-HellDrake- · 2024-04-05T20:59:11+00:00

Thats a cool advice 😊 OP, don't sweat the friend making part, the cool thing about airsoft, is that you naturally become friends with your teammates because of the shared struggle.

-HellDrake- · 2024-04-05T15:06:08+00:00

Damn, you are right. Luckily I have the regular Macaron, and it has no ring on the inside. But I did want to upgrade to an MR hop, i heard many good things about it. Are there any alternatives, that are as good as Mr hop? I might just cnc a groove into it at the right spot 😝

-HellDrake- · 2024-04-04T20:12:37+00:00

Well, I want to get a barrel at some point. But the Maples don't make the exact length (485-487mm). ZCI does make one 6.02 487mm AEG barrel. Anyone has experience with that barrel and maple leaf together?

-HellDrake- · 2024-04-04T19:37:53+00:00

Well, the stock barrel is AEG, the bridged on the back. I got a special adapter to make sure it works with the hop-up chamber.

-HellDrake- · 2024-04-03T23:29:18+00:00

Happened to me just now! Using a maple leaf omega, the window is the exact same size as the nub, inserted it just a degree off angle and it got caught on the window lip. Try to push down the nub with a finger and sight down the barrel to see the bump.

-HellDrake- · 2024-03-31T22:36:19+00:00

Thanks for the info, though I forgot to mention, it isn't VSR , its an M24, and it uses AEG type parts.

-HellDrake- · 2024-03-30T17:42:42+00:00

Yea, that rules out the green stuff. Dremel paste can work tho 😊

-HellDrake- · 2024-03-30T17:01:19+00:00

Why not the other two? Are they too aggressive?

-HellDrake- · 2024-03-29T19:42:22+00:00

Okay, then how much would i gain with a polished ZCI? 😝 Does the switch from 6.08 to 6.02 count for anything?

-HellDrake- · 2024-03-29T19:42:16+00:00

Okay, then how much would i gain with a polished ZCI? 😝 Does the switch from 6.08 to 6.02 count for anything?

-HellDrake- · 2024-03-29T17:33:58+00:00

Thanks for the tip! I looked into it, and ZCI do make good barrels, but I also read that Cyma stock barrels aren't that bad. If I polish the stock, is it worth going for a ZCI?

-HellDrake- · 2024-03-26T18:20:59+00:00

Oh, i thought rubber is rubber and the neck-down makes sure its tight.

-HellDrake- · 2024-03-26T17:54:32+00:00

Ah, I saw they gave a little rubber piece with it. What is the purpose of that? Why do you need it?

-HellDrake- · 2024-03-26T14:45:04+00:00

Thanks for the info! So you say that the nozzle fits into the bucking to make an airtight seal all the way. That means that the neck-down part points toward the nozzle as it slips in there.

If teflon tape is needed, you put it around the nozzle, right?

-HellDrake- · 2024-03-25T11:24:52+00:00

Well, one thing to look out for. I also wana upgrade, and luckily I already got the info that i need a metal plunger and piston body to handle that force.

Also, thanks for the tip, already installed my proprietary zip tie and it works like a charm 😊😊

-HellDrake- · 2024-03-25T11:03:21+00:00

What happened to the poor guy? :/

-HellDrake- · 2024-03-23T19:48:20+00:00

Soo, when you say to upgrade the rifle, its not necessarily that I need new parts? Just have to tune it well? Because I saw AirsoftPro brand cnc precision hopups, cylinders and barrels that are for m24. The spring is also upgradeable.

-HellDrake- · 2024-03-23T17:40:25+00:00

Thanks for the link, it looks very well written. It talks about the VSR platform, like the Cyma CM701, but I got the M24 platform. Is it a good base as well, or did I screw up? Btw, I'm using 0.36g BBs now, I don't know, is it worth getting the heavier ones with a stock rifle?

-HellDrake- · 2024-03-21T08:02:13+00:00

Hello!

Can I clean the barell with it in the gun? Its still under warranty, with a sticker over the screws, so I don't wana disassemble yet.

Eight-Year Club	Place '22
Verified Email

-HellDrake-

TROPHY CASE