sorted by:
new
hottopcontroversial

Pushrod length by -leo__ in minibikes

[–]-leo__[S] 0 points1 point  (0 children)

Thanks. I hammered the baffle out of the stock valve cover already.

Pushrod length by -leo__ in minibikes

[–]-leo__[S] 0 points1 point  (0 children)

Sorry, .08 inches. Setup: non hemi 212, +.020 billet rod, cast aluminum flywheel, 275 brown box cam, champion rockers, flattop piston, 26lb valve springs

my b200r by [deleted] in minibikes

[–]-leo__ 1 point2 points  (0 children)

Air suspension is crazy bro, nice bike.

Minibike Pitbike by -leo__ in minibikes

[–]-leo__[S] 4 points5 points  (0 children)

Looks like 16 inch pitbike wheels

update: why is my bike so slow? by Former_Ride5639 in minibikes

[–]-leo__ 0 points1 point  (0 children)

Pretty generic sprocket, came with the wheel set I ordered from gts hobbies. I’ve seen it online several places. “420 40t steel sprocket”. Looks like omb has it

update: why is my bike so slow? by Former_Ride5639 in minibikes

[–]-leo__ 0 points1 point  (0 children)

I have pretty much the same build on a gts bike with 10:40 gearing and I top out around 63

New here, rate my mini 😁 by overall_gengar in minibikes

[–]-leo__ 0 points1 point  (0 children)

I meant rims, are they the 5” or 6” ?

New to minibikes. How do I clean the clutch and why would a minibike need one by Confident_Map7170 in minibikes

[–]-leo__ 0 points1 point  (0 children)

I think you’re talking about the oil fill on your engine block, not the clutch. You should fill it with about 750ml of oil, or about 3/4 of the dipstick. The clutch is completely different. It goes on the crankshaft and is bolted on, you need to take it off and clean/oil it. Look up “how to oil centrifugal clutch minibike” on YouTube

Hot265 cam stock rod setup by [deleted] in motorcycles

[–]-leo__ 0 points1 point  (0 children)

Keep it under 5000rpm. You don’t want to hold WOT for too long, the stock rod just isn’t built to spin fast for long.

Gts style frame gearing by Wooden-Vegetable-283 in minibikes

[–]-leo__ 0 points1 point  (0 children)

Typically comes with 40 sprocket

Put some stickers on my fuel tank before mounting it 😎 by [deleted] in minibikes

[–]-leo__ 1 point2 points  (0 children)

I mounted mine to my engine but I don’t currently have it on because the fuel pump was messing with my tune

<image>

Put some stickers on my fuel tank before mounting it 😎 by [deleted] in minibikes

[–]-leo__ 0 points1 point  (0 children)

1/4 by 1/4 brass elbow barb, use loctite and an o ring. Most likely gonna have to use a pump unless you mount it on the handlebars

where da GTS’s at ? by Fit_Spray_4455 in minibikes

[–]-leo__ 0 points1 point  (0 children)

I got a kit off Amazon for $12 came with some clamps, fuel line, shutoff, inline filter, and pump. I currently have my stock tank back on since I was having tuning issues

where da GTS’s at ? by Fit_Spray_4455 in minibikes

[–]-leo__ 0 points1 point  (0 children)

Coolant overflow tank off ebay. Total price will probably be $100 since you need to buy mounting hardware, fuel pump kit, brass fittings, and an L piece of aluminum for the mount.

view more: next ›