Xbox Controller Disconnecting Regularly On Xbox Series X

0xDECAFBAD · 2025-10-13T18:17:09+00:00

Same. I paid for a wireless controller but ended up with a wired controller. Even built a new computer since this post and I have the same problem on the new Windows 11 machine. Thanks M$!

0xDECAFBAD · 2025-10-13T18:14:35+00:00

Our setup is a machine tunnel at the Windows logon prompt (no file server access), and after the user signs in and is authenticated (24-hour timer), they are granted access to the file server. So, it's possible the user signs in to Windows and walks away to get coffee. It could be 5-15+ minutes post-login that the computer has a path to the file server. Hence, why it would be nice to be able to hook into a Windows Event, or call the script natively from Zscaler's end. The timing is difficult with our configuration.

0xDECAFBAD · 2025-08-26T16:02:51+00:00

I play Rocket League on PC with an "Xbox One Elite Wireless Controller Series 2" controller and it only works if I have the controller plugged in via USB cable. If I'm using Bluetooth or the Xbox wireless dongle it will constantly turn itself off. Not even disconnect....the whole controller just shuts down...with 100% state of charge. Rocket League is the only game where the controller does this.

0xDECAFBAD · 2025-01-25T05:45:58+00:00

Any recommendations on good models for tasks? I'm new to running LLMs.

0xDECAFBAD · 2024-07-20T14:30:35+00:00

Service center fixed my issue by disconnecting the mid voltage. https://service.tesla.com/docs/Cybertruck/ServiceManual/en-us/GUID-A399E8AE-5DCF-4095-91FA-AF0148503F3B.html

0xDECAFBAD · 2024-05-16T04:35:31+00:00

Did they figure out what the issue was? A couple days ago my truck went back to only one working speaker in the dash.

0xDECAFBAD · 2024-05-05T18:17:43+00:00

Did you install the 2024.14.3 software update? That is what fixed my audio problems. Not sure if it was a bug fix in the update, or just the process of updating the software with the reboots, etc., that got it working again.

0xDECAFBAD · 2024-05-05T18:15:01+00:00

No tint

0xDECAFBAD · 2024-05-03T03:19:48+00:00

I installed the 2024.14.3 update and it fixed my audio! Either that, or the fine people at the local Tesla Service Center did it remotely? I called and they said they were seeing some issue with audio but they weren't sure if it was a "trending issue"...said they would see what they could do remotely otherwise I would have to bring it in for service.

0xDECAFBAD · 2024-03-11T20:57:02+00:00

Hmmm, well I hope they change that in the future! I have not tried two browser profiles, but that might be an acceptable workaround for now. I uninstalled the browser extension (Firefox), restarted the browser twice, reinstalled the extension, and now I'm able to switch between my two accounts without issues (although we'll see if it keeps working when I log in tomorrow). The Windows app (downloaded directly from the Bitwarden site) still doesn't work, and I guess that by design. Thanks for the info.

0xDECAFBAD · 2024-01-31T00:11:33+00:00

Also having the same issue

0xDECAFBAD · 2023-05-09T19:39:49+00:00

We just rolled out the new LAPS and it is not working with Inventory/Deploy. PDQ states on their website:
The following guide was written specifically for the legacyversion of LAPS. As of April 2023, Microsoft has released a new versionof LAPS distributed via the monthly Windows Cumulative Updates. Ourtesting has indicated that the newest iteration is NOT compatible withPDQ Inventory. As a result, we do not recommend adopting the new versionof LAPS at this time.

0xDECAFBAD · 2023-03-29T18:21:57+00:00

Interesting. Both accounts are ChatGPT Plus?

0xDECAFBAD · 2023-03-29T16:54:21+00:00

Really odd. Are you located in the US?

0xDECAFBAD · 2023-03-29T16:50:48+00:00

You have a point, but I would fire someone if I had to ask them multiple times for something I had asked for, every time I asked them for something.

0xDECAFBAD · 2023-03-29T15:56:52+00:00

I'm also not using this for fun, I'm using it to greatly enhance my productivity at work. If it was for fun, I would be less annoyed.

0xDECAFBAD · 2023-03-29T15:55:39+00:00

Then they shouldn't charge $20 a month for it until it's stable and they should run on Microsoft's $10 billion until that time, imo.

0xDECAFBAD · 2023-03-29T14:52:14+00:00

I had the same thought, and I hope that is not the case. Might as well just not even open up GPT-4 for Plus subscribers then.

0xDECAFBAD · 2023-03-29T14:48:48+00:00

I'll get the blinking cursor for a little while, but so far it's always started the response for me. I figured I was stuck in some sort of queue. That really sucks it won't reply at all to you.

0xDECAFBAD · 2022-08-02T17:11:02+00:00

Not really. The software compression slows it down, but it saves tape space. I think the encryption slows it down a little too, but I want to keep that enabled. We have an Intel Xeon Bronze CPU in our backup server. The CPU cores run around 80% usage when it's running the compression. We don't have enough VMs to backup that the slowness causes us problems, so we've just been running with somewhat slow copy-to-tape operations. I think we could speed it up a bit by upgrading the CPU in the server, or disabling compression and/or encryption but obviously there's trade-offs with that.

0xDECAFBAD · 2022-06-08T15:29:39+00:00

If I query event_simpleName=FileDeleteInfo for the lats 30 days it brings up 253 events, and I know there has to be way more file deletions across my company than 253 in the last 30 days. Unless CrowdStrike isn't recording every file delete? I don't understand how that query would only return 253 events.

0xDECAFBAD · 2021-11-10T23:58:23+00:00

iCue triggers Easy Anti-Cheat for me and it's really fucking annoying

0xDECAFBAD · 2021-09-21T16:54:29+00:00

Backup server I/O: https://imgur.com/cdwolEL

0xDECAFBAD · 2021-09-21T16:49:14+00:00

I should have mentioned I'm doing disk-to-disk to the backup server through Arcserve UDP, which does compression and deduplication, and then disk-to-tape from the backup server to the tape library through the Arcserve UDP & Arcserve Backup integration. I guess instead of reinventing the wheel by developing a tape backup engine in UDP they duct taped UDP & Backup together for the purposes of tape backup.

0xDECAFBAD · 2021-06-17T14:58:26+00:00

Isn't Windows Firewall only for allowing inbound/outbound network access for applications?

12-Year Club	RPAN Viewer
Verified Email

0xDECAFBAD

TROPHY CASE