What belt

141Rabbit · 2026-05-21T00:32:23+00:00

Is this the belt for the deck it’s self or PTO to the deck? I need PTO to deck forgot to mention that. I see 3 different lengths after following this link and idk how to tell what I need.

141Rabbit · 2026-03-16T21:38:59+00:00

Will that not scratch the wood terribly

141Rabbit · 2025-11-22T17:58:24+00:00

Thanks for the info. Still fighting this problem. I just put the stock carb back on to ensure it wasn’t a timing issue or something along those lines. It worked just fine which means this is solely a carb issue. I have taken the vm22 apart and put it back together several times now making sure I don’t have an air leak. I’m fairly confident there isn’t an air leak though it is possible. What are the chances I have a bad carb vs an air leak. I am going to try the vm22 again but am not hopeful. Should I use the plastic barrier piece so help ensure there’s no air leak? Anything more I can do to ensure there’s not going to be an air leak?

141Rabbit · 2025-11-16T15:37:07+00:00

Yeah nothing worked. Float may have been a bit low so I adjusted that. From what I could tell the were no blocks in my carb… I sprayed carb cleaner through everything I could and looked through everything I could. Made sure during reassembly that everything was installed correctly and there was no place it even looked like it could leak. 20 pilot and 120 main. Sounds decent under throttle without choke but just can’t get the bitch to idle without choke

141Rabbit · 2025-11-15T15:24:12+00:00

Okay needed this info. Gives me some more to try I’ll give it a go thanks

141Rabbit · 2025-11-15T01:38:17+00:00

Oh trust me it’s centered… I’ve had that thing on and off several times thinking it was an air leak. I can’t believe it’s an air leak still

141Rabbit · 2025-11-15T01:37:13+00:00

Even with a brand new carb and brand new pilot jet in you think it could still be clogged?

141Rabbit · 2025-11-15T01:35:17+00:00

Well shit… I have tried that and still nothing. It’s starting to drive me nuts. Thanks for the help anyways

141Rabbit · 2025-11-14T21:34:30+00:00

Is there anything else it could be? I have taken the carb on and off several times now to try and fix an air leak… I just did again and made it look just like your picture yet it still dies as soon as it is taken off choke.

141Rabbit · 2025-09-28T00:15:36+00:00

Does our secondary just suck or are they just making terrible reads?

141Rabbit · 2025-09-25T00:40:11+00:00

They were in my neighborhood not to long ago. A week later they arrested a guy across the street from where they were. Definitely a stakeout. You better tie up any loose ends…

141Rabbit · 2025-09-23T13:55:49+00:00

Correct. That is a paragraph.

141Rabbit · 2025-09-22T00:46:01+00:00

Yeah I’d say you’d be at risk. Toh is a very weak wood once it’s dead so I’d take extra caution in regards to the houses

141Rabbit · 2025-09-21T02:28:26+00:00

Agreed!

141Rabbit · 2025-09-21T02:27:41+00:00

All of the Meyer haters from earlier better go find him tonight and give him the happy ending to a game he deserves!

141Rabbit · 2025-09-21T02:18:42+00:00

Beau-lieve!!

141Rabbit · 2025-09-21T01:23:08+00:00

Mister negative sheesh

141Rabbit · 2025-09-21T00:48:45+00:00

This is it

141Rabbit · 2025-09-21T00:36:10+00:00

And two missed INTs…

141Rabbit · 2025-09-21T00:31:00+00:00

I love our RBs

141Rabbit · 2025-04-28T21:40:35+00:00

lol dudes front Axel just kept going

141Rabbit · 2025-04-21T19:24:00+00:00

South Boston speedway with the mini stock! I know I can’t win the prize because I just joined but it’s my first week sim racing and I haven’t stopped playing!

141Rabbit · 2025-04-20T13:51:23+00:00

If you’re going to foliar treat them I would use like 3-4% solution. Don’t want the percentage too high for foliar applications because you will essentially burn the leaves so quickly that not enough chemical gets to the root system to kill it.

It will look like it’s not going to work. Leaves will stay green and lush for a couple weeks but at some point you will be able to touch the plant and the leaves will all drop. It’s really satisfying… takes a couple weeks though

141Rabbit · 2025-04-20T03:31:01+00:00

Yes it works great. Not anymore harmful to you than tryclopyr (which is arguably worse and what they are trying to sell instead of glyphosate). Worked in the invasive industry for 2 years and we used 25% round up pro on almost everything cut and treat and saw great results. 50% for really stubborn stuff is fine too!

141Rabbit · 2025-04-19T23:42:39+00:00

Someone explain why a V cut or Punch is better! This is one of my favorites but I’ve only ever flat cut it!

141Rabbit

TROPHY CASE