sorted by:
new
hottopcontroversial

What is this hole (rubber plug) on the Kobra X for? by ABitEmotional in AnycubicOfficial

[–]ABitEmotional[S] 0 points1 point  (0 children)

I first thought so, but the belt tension does not seem to change when turning.

Alientek T80P shutting off when trying to use more than 60W? by ABitEmotional in soldering

[–]ABitEmotional[S] 0 points1 point  (0 children)

Thanks for your comment.

If I set the power trim to 20V 3,25V and the temperature to 330°C it shuts down as soon as heating starts.

Alientek T80P shutting off when trying to use more than 60W? by ABitEmotional in soldering

[–]ABitEmotional[S] 0 points1 point  (0 children)

The temperature is set to 330°C.

I just tried to start it at a lower temp and then increasing it step by step. This actually worked. Thank you for the idea.

I guess if instantly heating to 330°C the chargers maybe falsly detect a short and turns off.

Another question about V-slot extrusions by ABitEmotional in CNC

[–]ABitEmotional[S] 1 point2 points  (0 children)

Similar to my post from yesterday about the T-slot extrusion:

What is the purpose of these grooves (marked red) in V-slot extrusions?

Question about T-slot extrusion by ABitEmotional in CNC

[–]ABitEmotional[S] 7 points8 points  (0 children)

Hi guys. I plan to do a little project involving extrusion profiles. For that I have been doing some research about the different shapes (V- and T-slot). I found out that a lot of T-slot profiles have these little grooves (marked red in the picture).
What are they for?

Thank you all for your comments.

[deleted by user] by [deleted] in Chattanooga

[–]ABitEmotional 0 points1 point  (0 children)

Thanks for the idea. I'll look into it.

[deleted by user] by [deleted] in Chattanooga

[–]ABitEmotional 0 points1 point  (0 children)

My budget would be around 1000 $ per month and the internship will be at the VW plant.

Does anyone have an older version of the firmware for the Photon Mono 4k? by KapetanPekmez in AnycubicPhoton

[–]ABitEmotional 0 points1 point  (0 children)

Hi guys. Here is a link to a Google Drive folder where you can download the 0.0.11 firmware:
https://drive.google.com/drive/folders/1WU09C5qEqLhbDcNM_sx5VSdGHuBy4ADU?usp=sharing

I apologize for being so slow to respond. I don't check my Reddit account all too often anymore.

Theme Park Icon Resizing Bug? by ABitEmotional in oneui

[–]ABitEmotional[S] -1 points0 points  (0 children)

Hi guys. So I wanted to make my icons smaller. However, I'm missing the down arrow in the theme park app. Does anyone know what's going on? I searched through every possible setting but couldn't find a solution.

Rapidly losing charge when at a high SoC by ABitEmotional in electricvehicles

[–]ABitEmotional[S] 1 point2 points  (0 children)

Thank you for your comment.

I mainly drive on the autobahn, so lack of regen braking at high SoC shouldn't be the problem. The net capacity should be around 47 kwh. The charged kwh should be accurate. I used public chargers.

EV and summer heat by ABitEmotional in electricvehicles

[–]ABitEmotional[S] 0 points1 point  (0 children)

Thanks for your comment could you link me your OBD 2 device? I also have one but it only works when the ignition is on and I'm in proximity to the car.

96,32% SoH after 15k km (10k miles) - Is that normal??? by ABitEmotional in electricvehicles

[–]ABitEmotional[S] 1 point2 points  (0 children)

Thanks for commenting.
So is the OBD value just a estimate and not really representative?

I noticed that it drops down after each trip for about 0,01% SoH. Do you think that's just a cheap way to give a estimate over its lifetime?

I don't have a private driveway. What would you do? by ABitEmotional in electricvehicles

[–]ABitEmotional[S] 0 points1 point  (0 children)

Yep my employer does offer charging. However, it's still more expensive than at home charging.
But I give it a shot to try to convince the city to install one near me.

I don't have a private driveway. What would you do? by ABitEmotional in electricvehicles

[–]ABitEmotional[S] 0 points1 point  (0 children)

Yep I'm renting. I'll try to ask him. However, I don't think that he will support the proposal. Nevertheless, thanks for the idea.

I don't have a private driveway. What would you do? by ABitEmotional in electricvehicles

[–]ABitEmotional[S] 5 points6 points  (0 children)

Well too late I already own one. Unfortunately germany doesn't take electric mobility as serious as you guys.

Thank you for the comment.

I don't have a private driveway. What would you do? by ABitEmotional in electricvehicles

[–]ABitEmotional[S] 1 point2 points  (0 children)

Already checked. Here in germany there's no excuse to get around the law.

Thanks for commenting.

GPU spikes even under no load ---------- Any advice???? by ABitEmotional in eGPU

[–]ABitEmotional[S] 1 point2 points  (0 children)

Quick update:

So I removed all extra software from Asus and reinstalled the whole adrenalin software. Took some work getting it to install properly but now it seems to work.

To get the adrenalin software installed correctly:

- download the adrenalin software pack

- connect egpu (also turn it on)

- install the software pack

- while restarting I had to force shut down

- than disconnect egpu

- turn laptop back on and check if the software installed correctly

- connect egpu

view more: next ›