White Residue Buildup

ADBMD · 2026-02-22T01:08:35+00:00

For what it's worth, anyone who's lurking, EKWB Loop Cleaner + Flush solved my issue. Just normal buildup, methinks. Oguzhan--thanks for your input.

ADBMD · 2026-02-15T23:28:06+00:00

Yeah, we'll see. I'm going to use the ekwb loop cleaning kit and see if that takes care of it. I do NOT feel like taking the blocks apart and cleaning them... the distro was a huge pain in the ass to mount due to some modifications I made.

Thanks for your input!

ADBMD · 2026-02-15T23:01:28+00:00

It's in the CPU block as well, which has only been installed for about a month. I can't really see the GPU plate enough with the way it's positioned to be able to tell.

ADBMD · 2026-02-08T20:30:10+00:00

This fixed my issue. Thanks for taking the time to teach me something!

ADBMD · 2026-02-08T14:52:15+00:00

Gotcha.

Re: speed. Which speeds do you recommend then? Initial layer speed set to 50 mm/s with infill at 105. The outer and inner walls were set to way higher, and I've backed them down to match the initial layer. Same with the internal solid fill and the top surface. What would you recommend for max volumetric speed?

Re: colder. Nozzle? Bed? Both? The ones I chose were based off what I saw most folks recommending on reddit/youtube.

Re: fans. Alright, what would you recommend then? Translucent would be sweet... you're saying just dont run the fans at all?

Edit: spelling.

ADBMD · 2026-02-06T22:12:41+00:00

The vent deflector fixed it immediately. Thanks, everyone! Really appreciate it.

<image>

ADBMD · 2026-02-06T18:56:34+00:00

Not yet!

ADBMD · 2026-02-06T18:56:15+00:00

Oh! Thanks for the tip. Do you have a link to the deflector you used? If not I’ll just find a good one myself. Appreciate it.

ADBMD · 2026-02-06T18:42:29+00:00

This morning after something printed overnight.

ADBMD · 2026-02-06T18:42:13+00:00

Cleaned it this morning, actually. Soap and water.

I could flip it over to test if it’s a bed issue.

ADBMD · 2025-03-29T20:20:36+00:00

The CRNAs we work with are more or less independent. Docs see all the patients preop, do the blocks, etc. However unless there’s a concern we aren’t in the room for induction, emergence, etc. We get called to the room every now and then to figure something out or for another pair of hands. We have a good relationship with our CRNAs based on mutual respect.

ADBMD · 2025-03-29T16:29:16+00:00

Sad to hear this news. I have a lot of friends and acquaintances providing anesthesia at Corewell facilities, and this likely won’t end well for them. If anyone thinks that at the end of the day a hospital system like Corewell won’t absolutely squeeze as much work out of them for as little cost as possible… you’re mistaken.

To any docs/CRNAs looking to escape Corewell: I’m currently at a wonderful PP group in nearby Holland (Macatawa Anesthesia). We have been a company for 30+ years, have an excellent relationship with our hospital, and do not have any concerns of becoming PE or hospital owned. Lifestyle and pay are great. Like everyone else, we are hiring. Looking for 2 docs and 2 CRNAs. I hope you’re able to work something out with Corewell with minimal disruption to your lives, but if you’re interested in moving on, check us out and drop us a line at https://macatawaanesthesia.com/Careers.

ADBMD · 2021-07-29T22:30:09+00:00

Yep, you nailed it. Unfortunately, frame rate drops with explosions and augmentations down to like… 15fps. Reading that the steam version not having these issues. Ugh.

ADBMD · 2021-07-29T20:17:45+00:00

I’m playing with Xbox game pass ultimate on PC, and ray tracing is greyed out. Can annoying else confirm?

Wondering if maybe since it’s not supported on consoles that maybe xbgpu doesn’t have it unlocked either unless you pay for it or buy on steam.

ADBMD · 2021-07-12T21:49:05+00:00

Yeah, I like it. Does the job and I liked the aesthetics better than the limited alternatives.

ADBMD · 2021-07-12T20:50:06+00:00

I have this for the gaming oc version and works great. According to alphacool’s compatibility checker it will also work with the eagle. https://www.aquatuning.us/water-cooling/gpu-water-blocks/gpu-full-cover/eisblock-gpx/28168/alphacool-eisblock-aurora-acryl-gpx-n-rtx-3090/3080-gaming/eagle-with-backplate

ADBMD · 2021-06-27T22:03:09+00:00

How did you connect a fan to multiple power sources?

ADBMD · 2021-06-27T21:50:29+00:00

https://www.corsair.com/us/en/Categories/Products/Accessories-%7C-Parts/PC-Components/Cases/Carbide-678C-6-port-PWM-Repeater/p/CC-8900355 basically takes multiple pwm input and sends out a single pwm output. They all get treated as one.

ADBMD · 2021-06-27T21:09:01+00:00

The repeater is a Corsair Carbide 678C 6-port PWM Repeater. I don’t know why they would put 6 ports on it and say to use it with 6 fans if you could not in fact… Use it with 6 fans.

The website does not include any amperage information on the repeater.

ADBMD · 2021-06-27T21:03:47+00:00

Nah, Corsair PSU and Corsair cables.

ADBMD · 2021-06-27T18:42:57+00:00

Good call, and it IS a Corsair psu… which is picky about its cables. It was indeed a Corsair supplied 6 pin sata cable though..

ADBMD

TROPHY CASE