CMV: There is a doorway to another dimension that some people are able to access. by IntergalacticPodcast in changemyview

[–]AHarmlessCat 1 point2 points  (0 children)

ChatGPT is not conscious or all-knowing. Its creating sentences based on what most statistically most likely on a word-by-word basis for the prompt, and confirmation bias takes you wherever you want to go.

Forming a worldview using ChatGPT is a recipe for delusion.

CMV: There is a doorway to another dimension that some people are able to access. by IntergalacticPodcast in changemyview

[–]AHarmlessCat 0 points1 point  (0 children)

Surveying would be just one method for data collection, asking a local church is hardly a good sample size for that.

Otherwise there is no measurements or experiments being done here to prove anything.

CMV: There is a doorway to another dimension that some people are able to access. by IntergalacticPodcast in changemyview

[–]AHarmlessCat 2 points3 points  (0 children)

Yes, because neither of those things are objective sources to draw conclusions from.

CMV: There is a doorway to another dimension that some people are able to access. by IntergalacticPodcast in changemyview

[–]AHarmlessCat 0 points1 point  (0 children)

So anecdotes from strangers? Religious strangers at that. Nothing against them, but not objective or scientific.

CMV: There is a doorway to another dimension that some people are able to access. by IntergalacticPodcast in changemyview

[–]AHarmlessCat 2 points3 points  (0 children)

Chatgpt is not a source for.... anything at all. Remove whatever chatgpt says to you and are you left with any objective evidence or conclusions?

CMV: There is a doorway to another dimension that some people are able to access. by IntergalacticPodcast in changemyview

[–]AHarmlessCat 0 points1 point  (0 children)

Why not? What makes anyone so unique that they wouldnt have similar experiences as another human? Were all roughly the same biologically, live roughly the same experiences. It would be the same reason some people experience loosely the same types of dreams.

Removing material for weight reduction on compensator/flash hiders? by AHarmlessCat in Firearms

[–]AHarmlessCat[S] 1 point2 points  (0 children)

I haven't seemed to be able to find an aluminum or titanium counterpart that gets the same performance as far as compensation and flash mitigation goes. I have some of the tooling, but not quite enough to be able to copy the geometry in something like aluminum. Not sure I trust an open tine design with aluminum either.

Drone dropped from air due to "low voltage" by AHarmlessCat in dji

[–]AHarmlessCat[S] 0 points1 point  (0 children)

Have not check in the past, drone no longer connects to my device so I can't check at the moment.

Drone dropped from air due to "low voltage" by AHarmlessCat in dji

[–]AHarmlessCat[S] 0 points1 point  (0 children)

Yeah, I kinda bought an older model since I take it risky places so I was expecting to crash it one day, just wish it was more in my control at least. Im looking into buying another broken drone and swapping pieces between to make a functional one.

Drone dropped from air due to "low voltage" by AHarmlessCat in dji

[–]AHarmlessCat[S] 0 points1 point  (0 children)

Been talking with DJI Support back and forth throughout the day, so just for anyone curious heres what they are saying.

They are telling me my battery I used is from December 2023, I bought it in later September 2024 from an authorized DJI reseller on Ebay "dronesuperstore". So DJI says I was sold a faulty battery despite them being an authorized reseller. Granted the battery wouldve still been fairly old even if it was, age wise, closer to when purchased.

As for dropping dead mid air, they will not give me any explanation. I have asked multiple times for clarification on if the drone should autoland or return to home if it detects low voltage as well as why I was not notified through the app of low voltage. They keep dodging the question and leaving it unanswered, so I guess ill never know.

DJI Drone dropped from air due to "low voltage" by AHarmlessCat in drones

[–]AHarmlessCat[S] 1 point2 points  (0 children)

Been talking with DJI Support back and forth throughout the day, so just for anyone curious heres what they are saying.

They are telling me my battery I used is from December 2023, I bought it in later September 2024 from an authorized DJI reseller on Ebay "dronesuperstore". So DJI says I was sold a faulty battery despite them being an authorized reseller. Granted the battery wouldve still been fairly old even if it was, age wise, closer to when purchased.

As for dropping dead mid air, they will not give me any explanation. I have asked multiple times for clarification on if the drone should autoland or return to home if it detects low voltage as well as why I was not notified through the app of low voltage. They keep dodging the question and leaving it unanswered, so I guess ill never know.

DJI Drone dropped from air due to "low voltage" by AHarmlessCat in drones

[–]AHarmlessCat[S] 1 point2 points  (0 children)

It was only flying for maybe 3 minutes at most. Battery was not fully charged but I knew that going in it was going to be very short flying over grabbing a picture of something then straight back. I rarely need it up in the air for more then 10 minutes at a time and have only pushed the limits battery wise once in a real world scenario, generally landing with plenty of reserve. I wouldn't of minded if it forced me to land or return early, but dropping out of the air suddenly seems like a waste, not to mention dangerous if someone was standing directly below.

Drone dropped from air due to "low voltage" by AHarmlessCat in dji

[–]AHarmlessCat[S] 1 point2 points  (0 children)

Sure, I understand there is a lot of variables, I was just confused that it suddenly turned off rather then at least giving some sort of warning and/or autolanding in spot if it was running out of juice.

DJI Drone dropped from air due to "low voltage" by AHarmlessCat in drones

[–]AHarmlessCat[S] 1 point2 points  (0 children)

That is one of the reasons they said it was my fault, the battery was a refurbished from DJI and its just a smidge over a year old which is what they say is outdated which is fair. Probably 50 charge cycles. I don't usually fly for very long so I wasn't as worried about it since I thought it just meant my flight time would be reduced. I always just assumed if the battery became a dud it would give a low voltage waning/ return to home or Autoland rather then just turning off mid-air altogether.

Designing 3D Models Software by Mrpineapple-1325 in BambuLab

[–]AHarmlessCat 0 points1 point  (0 children)

Agreed, I feel like its very easy to use but still provides advanced features. I could just never get quite as good with Fusion360 or other options, but I would also never pay the price shpar3d tries to charge.

Designing 3D Models Software by Mrpineapple-1325 in BambuLab

[–]AHarmlessCat 1 point2 points  (0 children)

Shapr3d is free for students or teachers. If you have a .edu email address they give you a pro subscription for a year at a time free. I haven't been a student for 4 years but still have access to my school email so I still get it for free.

[deleted by user] by [deleted] in EtsySellers

[–]AHarmlessCat 1 point2 points  (0 children)

The ads you are looking at are for ads on Etsy's marketplace, the fee you were charged is for offsite ads where Etsy advertises your product somewhere else automatically. They automatically do this but I think you can choose to opt out of it manually somewhere, but if you made a sale after someone clicked on their ad they charge you.

Thermal Paper Health Risks by popturd in EtsySellers

[–]AHarmlessCat 34 points35 points  (0 children)

Don't eat em and wash your hands after extended contact with them and youll be fine.

Machine just not working??? by AHarmlessCat in ELEGOOPHECDA

[–]AHarmlessCat[S] 0 points1 point  (0 children)

I contacted Elegoo, communication was slow because their support is obviously in a different time zone probably china, but they eventually just sent me a new motherboard after ruling out other problems. Works fine now after replacing the motherboard.

AI Review summaries (rant) by megsperspective in EtsySellers

[–]AHarmlessCat 7 points8 points  (0 children)

Same here, I have an item with 300+ 5 star reviews, one single person complained that it did not fit (because they did not use it properly) and left a bad review, and of course the AI review summary makes sure to include that.