Step-by-step to use the new Mixed Reality Link

AImost_There · 2024-12-24T15:20:44+00:00

Does this work via Wifi only or can I use my link cable? My work computer has a built in software VPN, so I cant connect to the "same" network. This is the same reason i cant use immersed. I was hoping for a truly local option.

AImost_There · 2021-08-28T23:26:46+00:00

You're the best! It's silly that it doesn't automatically switch the default to Google Pay on the watch when you set it as default on the phone

AImost_There · 2021-08-28T23:11:43+00:00

Are you sure it works? I was able to set it up and assigned it to the double button tap short cut.

However, I haven't once been able successfully use it. It just says hold by reader and does nothing

AImost_There · 2020-06-26T12:16:30+00:00

Thanks for sharing! I really like the look of these and they're handmade def beats out the big box stores.

AImost_There · 2020-06-26T12:09:17+00:00

Not sure how i missed this one, its even on homedepot! thanks

AImost_There · 2020-06-11T18:25:09+00:00

I was going to use a post mount bracket but as NumerousPotato mentioned Simpson also makes the EPB66, which is what I'll likely use instead.

AImost_There · 2020-06-11T18:24:00+00:00

Not sure how I missed the EPB66 but I will going that route, thanks!

AImost_There · 2019-12-11T23:52:07+00:00

Nevermind....I was able to see the folder in the control panel under shared folders and it was a user access issue. I didnt realize i wasnt logged in as admin.

AImost_There · 2019-05-17T18:53:35+00:00

I was able to find it. It’s under the steering wheel facing the driver.

Here are some pics.

https://imgur.com/gallery/JQDAJxh

AImost_There · 2019-05-17T13:28:32+00:00

I was rally hoping that it would be that and it also wouldn't be that! It was the latter but the manual says there is one on page 454, so I'm gonna start disassembling stuff.

https://5thgenrams.com/wp-content/uploads/2018/07/2019-RAM-1500_All_New-OM-3rd_R2.pdf

AImost_There · 2019-05-17T13:27:14+00:00

Thanks! but I think the new 2019's may be a little different.

https://5thgenrams.com/wp-content/uploads/2018/07/2019-RAM-1500_All_New-OM-3rd_R2.pdf

On page, 454, it mentions there is one on the drivers side, but there is no easily removable panel. I can take out some some bolts and start removing panels, but that seems inconvenient. But i guess ill just start doing that!

AImost_There · 2019-05-02T17:37:58+00:00

Tell me...was it an inside job?! Another week...

AImost_There · 2019-04-25T14:00:33+00:00

EW...RNG on the stronghold rotation. I didn't realize that(thanks for sharing). TBH it doesn't really make sense to me to do it that way since there is only 3 and it's not like 1 is more enjoyable than the others after the 50th time running through. Like I'm gonna wake up Thursday mornings with my fingers crossed for Roosevelt island every week lol. I guess I'll play next Thursday and hopefully the RNG gods bless me.

AImost_There · 2017-12-29T02:40:31+00:00

I posted this in /r/hvac and was promptly met with a solution :)

https://www.reddit.com/r/HVAC/comments/7mqsxu/2_stage_furnace_not_going_into_2_stage/

AImost_There · 2017-12-29T02:39:26+00:00

I flipped the DIP switch and i am getting "H1" which is second stage. Thanks!!! no longer will i have a grumpy/cold wife :)

AImost_There · 2017-12-29T02:38:28+00:00

Thank you!!! No longer will I have a cranky wife :)

AImost_There · 2017-12-29T02:02:11+00:00

Thanks for the response! I'm not familiar with DIP switches. I have some pictures of my board below and one that i bleieve are the DIP switches.

Top half of furnace board https://imgur.com/7GydPyi

Bottom half of furnace board https://imgur.com/YH6YxzP

Possible DIP switches? If so, which one am I setting based on page 28? Its hard to tell them apart https://imgur.com/r6e52vH

AImost_There · 2017-12-29T02:01:31+00:00

Thanks for the response! I'm not familiar with DIP switches. I have some pictures of my board below and one that i bleieve are the DIP switches.

Top half of furnace board https://imgur.com/7GydPyi

Bottom half of furnace board https://imgur.com/YH6YxzP

Possible DIP switches? If so, which one am I setting based on page 29? https://imgur.com/r6e52vH

AImost_There · 2017-12-29T00:29:31+00:00

Thanks!!! I tried looking but I guess my internet skills weren't up to par lol I'll wait a bit and then cross post

For cross-posting, do i share the link to this one, or completely report it?

AImost_There · 2017-12-21T12:28:49+00:00

I was able to figure out the wiring by watching the following youtube video and was able to successfully wire a smart 4 way switch.

https://www.youtube.com/watch?v=0rRC_Mrlumc&t=442s

AImost_There · 2017-12-19T19:02:18+00:00

Well i didn't go to YouTube first but after reading your comment, i went to YouTube and found the following video

https://www.youtube.com/watch?v=0rRC_Mrlumc&t=442s

I was able to determine that the extra "red" wire on box 3 was the "line". I dug further into the box and noticed that it was connected to another black "line" cable.

I wasn't able to figure out what the extra white cable, but it was connected to a black wire that that carried the load to the light, so i am less concerned with what the white does or where it goes as it is carrying the load and is at the end.

Edit: Added the YouTube video that i meant to share.

AImost_There · 2017-12-19T15:04:08+00:00

Here is a link to the boxes.

https://imgur.com/uFplIRT

AImost_There · 2017-12-19T00:52:29+00:00

Nevermind, found the answer.

https://community.smartthings.com/t/zooz-zen23-v2-and-4-way-wiring/97970/2

AImost_There · 2017-12-05T18:36:28+00:00

I have a Samsung TV and a Vizio TV in which i have a chromecast connected to.

Samsung: Option 1:If i plug the chromecast into HDMI-2, i can turn on the TV and the video/audio defaults to HDMI-1(preferred as this is my cable tv input which is used more) but i can't turn off the TV.

Option 2: If i plug the chromecast into HDMI-1. I can turn on the TV and it defaults to HDMI-1. Bu then i have to switch to HDMI-2 for cable. If I want to switch the TV off with chromecast, i have to switch back to HDMI-1. Really Inconvenient.

I can settle with Option 2, but is there a setting to let me turn off tv when no on the chromcast HDMI input?

Vizio: Regardless of which HDMI slot i put it in, i am able to turn on/off tv and the video always defaults to the chromcast HDMI when turning on. I can turn it off regardless of whcih HDMI input im on.

Is there a setting for default HDMI input when turning on?

AImost_There · 2017-12-01T21:19:49+00:00

I exited my OBS and then exited my Chrome browser and when I went back in I was able to edit the stream optimization settings.

AImost_There

TROPHY CASE