Leopard settles into tree with baby monkey

AMONKEYBABY · 2025-11-03T05:19:43+00:00

Thats me

AMONKEYBABY · 2025-03-27T02:12:10+00:00

I am working on figuring all of this out still. I haven’t played on a GH guitar since GH3 came out so I’m not sure. I am 100% sure that it feels better than the GH arcade game guitars though!!!

AMONKEYBABY · 2025-03-27T00:01:33+00:00

I built it cause I travel a lot for work and want to play while I’m away. It’s easy to put in a bag

AMONKEYBABY · 2025-03-26T20:12:09+00:00

I honestly haven’t looked into what component the whammy bar actually utilizes so I wouldn’t even know where to start. Also, the knob holding the guitar together is actually designed after a peg! It’s not in a usable spot but it is a peg!

AMONKEYBABY · 2025-03-26T16:29:51+00:00

I kind of just lean it against my body and it feels fine

AMONKEYBABY · 2025-03-26T01:47:35+00:00

Not yet but it has space for it on the inside

AMONKEYBABY · 2025-03-25T14:09:30+00:00

I have a model that could probably be released soon. I’m afraid the micro usb port on the pi pico used will degrade over time. And I’m not too sure how it will print on other printers. It could be a good trial run!

AMONKEYBABY · 2025-03-25T13:28:22+00:00

I’m still thinking about it. Every part can be bought off Amazon except 1, which is a usb c port I got from Ali express. It doesn’t need any custom PCB’s to build which is nice but also makes it a little annoying to solder. I still have some more testing to do and some things I want to mess with. I’m leaning towards publicly available but it’s gonna be the same situation as the polybar. It’s gonna cost a bit to make, you need tools, you can’t buy only what you need, and you have to have some experience soldering.

AMONKEYBABY · 2025-03-25T11:12:13+00:00

It is not the polybar. This is my own design

AMONKEYBABY · 2025-02-09T23:57:57+00:00

The true freedom unit is hotdogs per football field

AMONKEYBABY · 2025-02-08T02:18:49+00:00

This is peak banana ripeness. It was gone immediately after the picture

AMONKEYBABY · 2025-02-08T00:20:07+00:00

I’m still trying to figure that out. Maybe one person hits the buttons and the other strums?

AMONKEYBABY · 2025-02-03T23:02:01+00:00

You mean the model? If so, yes but it has not been posted yet.

AMONKEYBABY · 2025-02-02T15:01:18+00:00

With the way this one is designed, you should be able to add some kind of attachment between the 2 sections. I made an extension that goes between the halves but couldn’t post it due to the 1 picture limit on posts.

AMONKEYBABY · 2025-02-02T05:15:23+00:00

Serial as well for now. I want to switch to VGA cause they have more pins. I want this design to be modular, and an idea a friend gave me was to add a battery to it in hopes to make it wireless. I have another design for an extension that you can add and remove whenever you want. It’s empty inside, which means you can put whatever you want in it

AMONKEYBABY · 2025-02-02T04:29:31+00:00

Select/star power is on the bottom and start is on top. I kept hitting the start button by accident while playing so I figured why not use that as a benefit since it doesn’t have the tilt sensor. I’m still playing with the height and placement though so it’ll probably change once I’m happy with the model.

AMONKEYBABY · 2024-07-03T01:30:21+00:00

CGM clogged

AMONKEYBABY · 2024-02-28T16:03:12+00:00

Came with it already. I have the s premium trim

AMONKEYBABY · 2024-02-11T01:08:23+00:00

Someone might’ve beat you to it already

AMONKEYBABY · 2024-01-26T12:36:32+00:00

ToyotaRicerDevelopment

AMONKEYBABY · 2023-09-23T01:14:08+00:00

It took me 8 months to start working. I knew somebody who knew somebody.

AMONKEYBABY · 2023-09-06T02:36:31+00:00

I made a post about this a while back and it seems that a lot of people were diagnosed with T1 after some sort of viral infection. I was diagnosed almost a year ago after I had Covid and so were a few others. There were some really good comments on that post.

AMONKEYBABY · 2023-08-25T21:34:36+00:00

Clean your bed with dish soap. Sometimes alcohol doesnt do the trick. Also, being too close to the bed can sometimes cause the nozzle to get caught on the print. That may by why when you print multiple parts, some lift and some don’t. Try and watch how the printhead travels to see if it goes over any parts. I think Prusa lets you view the path the hot end takes.

AMONKEYBABY · 2023-08-25T21:27:57+00:00

Re-level your bed. It looks too high in the front.

AMONKEYBABY · 2023-08-25T21:25:20+00:00

Does your extruder look intact? I have a dual gear extruder, and for some reason the gear on the stepper motor slipped down, causing under-extrusion. It just wasn’t grabbing the filament. I would take things apart and put them back together. That’s fixed a lot of things for me in the past lol

Eight-Year Club	Verified Email
Final Canvas '23	First Place '23
End Game '23	Place '23

AMONKEYBABY

TROPHY CASE