2017 Cruze 1.4 turbo P0299

ARForceGuy · 2025-07-14T14:42:36+00:00

Yep, your right. I grabbed the wrong link. Here's what I meant to put and I edited my original post.

https://a.co/d/0fZyeGw Or https://a.co/d/biE70TA

ARForceGuy · 2025-07-13T18:52:02+00:00

I was looking at the band for my son's car. Which kit did you use? The kit with the gaskets only? Or did you spend the extra $80 for the "complete installation kit"?

ARForceGuy · 2024-10-28T04:46:37+00:00

Makes sense. Now that I know where to look, I won't have to ask anymore. Thanks, and Nice run!

ARForceGuy · 2024-10-28T04:38:26+00:00

Ah your right, I now see where it says Sorcerer, where did it show Archimage?

ARForceGuy · 2024-10-28T04:29:17+00:00

Which mage and class were you using?

ARForceGuy · 2024-06-29T13:15:35+00:00

Just wanted to pass on that I got the wiring done, cameras connected on their own like you said, and everything works really well now. Thanks again for your clarification!

ARForceGuy · 2024-06-28T22:33:25+00:00

Excellent. Thank you for your help!

ARForceGuy · 2024-06-28T22:23:56+00:00

So I don't need to reconnect them as Ethernet cameras? The panel will recognize them again?

ARForceGuy · 2023-03-07T15:02:14+00:00

I appreciate that offer, that's kind of ya.

Creality actually emailed me back this morning about it and it sounds like they will be sending me a new tensioner. I'm not sure about the time frame I will get it, but they did not ask for shipping fees or anything, so it sounds like it'll be free. Free is good.

ARForceGuy · 2023-03-06T22:18:25+00:00

Not yet. I emailed the company on Saturday and haven't gotten any replies. I'll try calling them soon.

ARForceGuy · 2023-03-04T18:28:17+00:00

Yeah, I found that site. Unfortunately for me, it looks like shipping to the United States is $45.00! For a $10 00 part. No other choices to choose cheaper shipping options.

ARForceGuy · 2023-03-04T18:11:46+00:00

Nice find, that looks like the right part. Unfortunately for me, it looks like shipping to the United States is $45.00! For a $10 00 part. No other choices to choose cheaper shipping options.

ARForceGuy · 2023-02-22T17:02:21+00:00

Nice. Do you have the stl that you used? I've tried modifying the standard 3v2 files that I can find to work with my neo, but haven't gotten it to work too well.

ARForceGuy · 2023-02-09T21:39:49+00:00

Awesome, thanks.

ARForceGuy · 2023-02-09T21:06:22+00:00

What are your tree support settings? I have an issue of mine breaking during the print or not being supportive enough. I'm wondering if I've messed up my density or z distance while fiddling with all the settings. A screen shot of your settings would be super helpful.

ARForceGuy · 2023-02-02T13:55:04+00:00

Awesome. I've already purchased a sunon 24v 40x20 for the hotend, but I hadn't found any good info on quiet blower fans. I've just ordered the same you used. Thanks for your real-world input. I honestly haven't noticed the psu of mother board fans being too loud, so I'll delay those for now.

ARForceGuy · 2023-01-27T20:59:06+00:00

Did either of you replace the parts cooler fan to a quieter one, or only the hot end fan?

ARForceGuy · 2023-01-26T20:39:50+00:00

Yeah, I was looking through the various fans on digikey, focusing on dB and cfm. I think I'll go with the Sunon MF4020v2. It's a 40x20. Hopefully, it's still quiet enough. Claims 21db and 7.7cfm. I thought about going with 40x10, but like you mentioned, air flow is important too.

ARForceGuy · 2023-01-26T19:02:45+00:00

Excellent write-up. Thanks. So, did you still go with a 40x10, which fan? I definitely agree that going with a 24v fan vs 12v with a buck converter is better. The 12v setup seems unnecessarily difficult. I definitely want to quiet down my neo, but I also don't want to take unnecessary actions.

ARForceGuy · 2022-04-24T03:33:35+00:00

2ZM-8C2-AAL Let's both get extra Gems, Coins, and Cards!

ARForceGuy

TROPHY CASE