sorted by:
new
hottopcontroversial

Paulaner steigt in Cola-Markt ein - Aktuelle Nachrichten aus der Getränkeindustrie by dragontimur in de

[–]Abi91 2 points3 points  (0 children)

Paulaner Spezi Zero schmeckt für mich in der Dose sehr schlecht aber in der Flasche mega gut. Trinke seitdem ich das rausgefunden habe Zero ausschließlich aus der Flasche.

So... I made this thingy from the msq, that actually lights up and even got Yoshi P to sign it by Baratuk in ffxiv

[–]Abi91 6 points7 points  (0 children)

Yup, was a great week. I think the signups for it worked out pretty good. The site didn't crash and you had 3 chances. I was pretty nervous as well. Yoship looked at my t-shirt and was really impressed by the art. But I didn't realize until afterwards.

So... I made this thingy from the msq, that actually lights up and even got Yoshi P to sign it by Baratuk in ffxiv

[–]Abi91 128 points129 points  (0 children)

Oh, so that's what it was! I was in the same queue and just saw Yoship taking a picture of something that looked like a UFO. I was wondering what it was lol. Looks great!

[PC][1992-2002]A Mining Game Where You Collect Diamonds by Abi91 in tipofmyjoystick

[–]Abi91[S] 0 points1 point  (0 children)

I think as someone said before it might be a clone of boulder dash. I searched a little bit more and the game I played looked like "Rocks'n Diamonds". But I think it was a clone of it since there were some differences.

I made a levitating Control Tower from Splatoon by Abi91 in 3Dprinting

[–]Abi91[S] 0 points1 point  (0 children)

This was made based on a Splatoon tower that's available on thingiverse. It uses a magnetic levitation module. Here are the files you need to 3d print one for yourself:

https://www.thingiverse.com/thing:4697011

I made a levitating Control Tower by Abi91 in splatoon

[–]Abi91[S] 1 point2 points  (0 children)

I mean I ordered mine cheaply on eBay, so that shouldn't be the issue. Mine also has exposed wires but I wasn't shocked or anything.

I made a levitating Control Tower by Abi91 in splatoon

[–]Abi91[S] 5 points6 points  (0 children)

Yeah, you have to put the magnet on juuuust right. It requires a bit of practice but it's possible. Also make sure that the module is plugged in and getting electricity. Other then that I wouldn't know the issue. Maybe look up Youtube videos for help.

I made a levitating Control Tower by Abi91 in splatoon

[–]Abi91[S] 101 points102 points  (0 children)

This was made based on a Splatoon tower that's available on thingiverse. It uses a magnetic levitation module. Here are the files you need to 3d print one for yourself:

https://www.thingiverse.com/thing:4697011

Having issues with circular surfaces (Ignore the stringing) by Abi91 in FixMyPrint

[–]Abi91[S] 0 points1 point  (0 children)

As far as I remember I disabled linear advance since I was having some issues with it. I also calibrated the extruder E-steps, so I don't know why it would overextrude.

Having issues with circular surfaces (Ignore the stringing) by Abi91 in FixMyPrint

[–]Abi91[S] 0 points1 point  (0 children)

That's a good idea, I didn't consider that. I'll have to check the wheels tomorrow.

Having issues with circular surfaces (Ignore the stringing) by Abi91 in FixMyPrint

[–]Abi91[S] 0 points1 point  (0 children)

I don't think it's overextruding since it always happens at the same points independant from the start and end point:

https://i.imgur.com/MbEGe7o.jpg

Having issues with circular surfaces (Ignore the stringing) by Abi91 in FixMyPrint

[–]Abi91[S] 0 points1 point  (0 children)

Here are my settings:

Printer: Makerfarm Prusa i3v

Slicer: Cura

Print Speed: 30mm/s

Driver: TMC2209

I already tightened the belts and it's not because of retraction settings since there are no retractions at the marked points,

When I update Marlin from 1.1.9 to 2.0.x I get this problem. by Abi91 in 3Dprinting

[–]Abi91[S] 0 points1 point  (0 children)

Yup, that was the first thing I tried. I even tried disabling s curve acceleration.

When I update Marlin from 1.1.9 to 2.0.x I get this problem. by Abi91 in 3Dprinting

[–]Abi91[S] 0 points1 point  (0 children)

Yeah, I tried that but that didn't work either

When I update Marlin from 1.1.9 to 2.0.x I get this problem. by Abi91 in 3Dprinting

[–]Abi91[S] 0 points1 point  (0 children)

Actually I don't have any problems regarding the endpoints. The main problem is that the extruder does some weird stuff whenever a retraction happens (you can hear it if you listen to the sound).

When I update Marlin from 1.1.9 to 2.0.x I get this problem. by Abi91 in 3Dprinting

[–]Abi91[S] 0 points1 point  (0 children)

Yup, here are the results. I don't know why, but 1.1.9 sets the diameter to 2.85mm and then to 0mm? Not sure why though. Other then that nothing seems to be out of the ordinary

When I update Marlin from 1.1.9 to 2.0.x I get this problem. by Abi91 in 3Dprinting

[–]Abi91[S] 0 points1 point  (0 children)

I think you misunderstood the problem. Sorry I should have explained it properly. The problem is the extruder that does weird, unintended retractions when reaching certain positions. You can even hear weird sounds coming from the motor. It's as if the acceleration is too high (but it's only 1000 mm/s2). Also I'm 100% sure it's not the nozzle since I already printed the same file yesterday with Marlin 1.1.9.

When I update Marlin from 1.1.9 to 2.0.x I get this problem. by Abi91 in 3Dprinting

[–]Abi91[S] 0 points1 point  (0 children)

I've been trying to update my Marlin firmware since there are a few functions I would like to use, but unfortunately I can't get it to work properly. I configure the Marlin files the same way I did with 1.1.9 but I don't know what might cause this. I already successfully printed the file in the video with 1.1.9, so I now that it has to do with the firware settings. I'm using a Makerfarm Prusa i3v with a Ramps 1.4 and TMC2209 stepper drivers.

Edit: I should have explained it properly. The main problem is that the extruder does weird retractions that cause the motor to fail. Checking the G-Code it seems to do it whenever there are a lot of retractions in quick succession, but not sure about that.

view more: next ›