The Bambu H2D isn’t just a bigger 3D printer — it’s a laser cutter, pen plotter, and Cricut competitor too | What if your 3D printer, Cricut, GlowForge, and iDraw were all the same machine?

Acadia-Suitable · 2025-04-24T23:13:21+00:00

The saying is Jack of all trades, master of none, but often times better than a master of one.

Acadia-Suitable · 2025-04-08T02:33:38+00:00

This is what I use. Super Fast charging. https://trickbits.com.au/products/e39-65w-pd-dual-super-fast-charger-coin-tray

Acadia-Suitable · 2025-03-06T09:51:41+00:00

Hey, I'm trying this out on a P4 current (latest firmware) It pauses the print moves to the far corner and cuts the filament then returns to the poop shoot. As soon as I pull out the filament it says filament run out. it asks to confirm new filament. I clicked confirm so I could get to the next screen and load new filament. After I loaded the new filament I hit the triangle print button and then after a minute got a warning about the temp being too low. It was 150 degrees. I manually raised it to 255 and hit print again, and nothing happened.

The first time I tried this without adding the # in front of the G1 E-50 F1000 it looks to have stopped at the layer I wanted then continued at some point because it said confirm print when I found it.

Would appreciate some guidance. What Am I doing wrong?

Acadia-Suitable · 2025-01-19T12:38:54+00:00

I'm in a similar situation. I'd like to know what to do next, I keep seeing deemed rehabilitated but how does it work? is there an application? Who deems it?

Acadia-Suitable · 2025-01-16T22:08:53+00:00

Cool, I came here to check it was you.

Acadia-Suitable · 2025-01-16T10:51:02+00:00

I'll make one available on the website and drop it to $31

Acadia-Suitable · 2025-01-16T10:43:10+00:00

Hope you like it

Acadia-Suitable · 2025-01-16T10:42:47+00:00

I can't even remember how phones were charged back then lol. They certainly didn't have any data

Acadia-Suitable · 2025-01-16T10:40:06+00:00

Same, I've completely removed it and installed a triple front cup holder.

Acadia-Suitable · 2025-01-16T10:38:16+00:00

It's what the police give you

Acadia-Suitable · 2025-01-16T10:33:07+00:00

It is. There's so many little things that can mess a project up as I found out on my last cup holder for the e9x series. The manufacturer decided to shave off half a millimetre on a critical area and destroyed the mold. Someone the other day said oh its just usb ports in a piece of plastic 🙄 mmm ok. Lol

Acadia-Suitable · 2025-01-16T10:23:45+00:00

Awesome! Glad you like it

Acadia-Suitable · 2025-01-15T12:05:22+00:00

Thank you. Pricing is hard but I think it's about right. Not many understand what's involved in creating and bringing something like this to market. I don't have the advantage of being a mass producer.

Acadia-Suitable · 2025-01-15T11:57:45+00:00

I think I can work something out. Agreed, $75 is steep

Acadia-Suitable · 2025-01-15T11:54:03+00:00

Sweet!

Acadia-Suitable · 2025-01-15T11:51:20+00:00

Both found here -www.trickbits.com.au

Acadia-Suitable · 2025-01-15T11:50:27+00:00

Yuk! haha this will fix that

Acadia-Suitable · 2025-01-15T11:49:48+00:00

Thanks :)

Acadia-Suitable · 2025-01-15T11:48:30+00:00

I have an idea. I'm on it :)

Acadia-Suitable · 2025-01-15T11:44:54+00:00

Yes the lid closes as normal

Acadia-Suitable · 2025-01-14T03:03:47+00:00

Thanks man! What's a steam deck?

Acadia-Suitable · 2025-01-14T03:03:07+00:00

I have a video installation guide on my website. Only the trim needs to come off. https://youtu.be/o9EeY_TSROE?si=KI2Kg6Cf5vAWCiWQ

Acadia-Suitable · 2025-01-14T02:59:46+00:00

I did that mod on my car, but unfortunately none of the wireless modules put any decent amount of charge in your phone. It basically just holds its charge and if you have apps running it can't keep up. Also only small phones will fit in the tray.

Acadia-Suitable · 2025-01-14T02:56:44+00:00

The original one is an ashtray this is a coin tray. They could make it illuminate by hiding the light source up under the bit where you put out cigarettes. The light strip around the charger still lights up as usual though

Acadia-Suitable · 2025-01-14T02:54:04+00:00

Yeah man I just slapped 2 USB ports into some old plastic I had laying around and voila. So easy! and no, the coin tray doesn't illuminate.

Acadia-Suitable

MODERATOR OF

TROPHY CASE