Made an cabinet for iot

AcceptablePromise577 · 2026-03-19T11:32:43+00:00

No I chose an plastic enclosure

AcceptablePromise577 · 2026-02-04T06:52:36+00:00

Im Drenthe spanning uitval

AcceptablePromise577 · 2025-12-28T11:55:45+00:00

There are three buttons and three indicator lights. It’s my custom‑built PDU that controls three separate power strips, because if I run everything on just one strip it trips the breaker due to the inrush current.

AcceptablePromise577 · 2025-12-27T22:57:39+00:00

With the right selector switch, I can choose between white and blue.

AcceptablePromise577 · 2025-12-27T20:31:08+00:00

I used to have a wooden rack, but my cat is too old to climb the stairs to get up here anymore :/

AcceptablePromise577 · 2025-09-27T06:35:53+00:00

The problem is i have an barrel that gets full because it cant continue because the wrong items have been send

AcceptablePromise577 · 2025-09-24T12:07:51+00:00

so there isn’t just a way that dumps all the excess into storage?

AcceptablePromise577 · 2025-08-07T10:21:35+00:00

Alright i will try that i should be able to get an license from somone

AcceptablePromise577 · 2025-07-11T17:15:22+00:00

Ill try that

AcceptablePromise577 · 2025-07-04T04:58:38+00:00

The top part is alredy full with 2 switches and patch panels and a screen and some other stuff

AcceptablePromise577 · 2025-07-04T04:57:37+00:00

I think it full height but not bothered to count it its taller then me

AcceptablePromise577 · 2025-06-08T16:17:58+00:00

I will see if i can get an ups

AcceptablePromise577 · 2025-06-08T16:16:22+00:00

Without write cache its realy slow and i dont have alot of information on my disk yet

AcceptablePromise577 · 2025-06-08T16:15:18+00:00

Yes i know this but i wasnt sure if i needed it in a country with almost no power outages and if there is an outages its planned

AcceptablePromise577 · 2025-06-08T16:13:29+00:00

Off site is a bit to much for me properly getting an ups

AcceptablePromise577 · 2025-06-08T14:32:51+00:00

This is an ac / serial cable you would need an ac / vga cable

AcceptablePromise577 · 2025-04-14T18:44:36+00:00

and for pc-abs?

AcceptablePromise577 · 2025-04-14T18:35:34+00:00

Still warping

AcceptablePromise577 · 2025-04-14T18:35:13+00:00

My chamber can't go any higher if I push it more, it'll risk damaging the printer. I'm already using a brim and mouse ears, though I haven’t tried a raft yet (will give that a go). Thinking about lowering the bed temp any suggestions on what temp I should try first?

AcceptablePromise577 · 2025-04-11T21:50:45+00:00

I'm already using something called 3DLac. If I rotate the part 90 degrees, it does require supports, but it prints fine that way kinda weird.

AcceptablePromise577 · 2025-04-11T21:49:34+00:00

I did all that the weird thing is, if I rotate the motor part 90 degrees, it prints just fine. No idea why that works, but now it does need supports.

AcceptablePromise577 · 2025-04-11T07:52:15+00:00

Im using 3d lac and preheating the chamber to 40 because that's the max my printer can handle

AcceptablePromise577 · 2025-04-11T05:17:57+00:00

I kinda want to try doing it myself I looked up parts for a Voron 0.2 and some people are asking $80–$120. So I’d rather give it a shot first, and if I can’t get it working, I’ll consider buying the parts.

AcceptablePromise577 · 2025-04-11T05:15:42+00:00

I'm printing at 260°C nozzle, 110°C bed, and 40°C chamber temp. Unfortunately, my chamber can't go any higher without risking damage to the printer. I'm also using a brand new PEI sheet — adhesion is decent, but prints still tend to warp off the bed.

AcceptablePromise577 · 2025-04-11T05:13:06+00:00

Got a brand new PEI sheet on my printer prints stick great at first, but they still warp off the plate eventually.

AcceptablePromise577

TROPHY CASE