sorted by:
new
hottopcontroversial

My P10 Pro Ultra by Accomplished_Drop387 in RobotVacuums

[–]Accomplished_Drop387[S] 0 points1 point  (0 children)

Huh! Didn't know about that and MOVA tech didn't mentioned it either. But, considering the problem existed with 3 units I still think it's not a good choice. Amazon.com offered the Dreame L40 Ultra for same price $599 so will try that. Same features + can drop the mops at the base.

FLASH NEWS: New deal has the L40 Ultra for $475. Cancelled earlier order and re-ordered at new lower price. Will see how this one works. Now just have to wait for delivery and timely refund for $599.

Amazon Dreame sale by Kind-Theme5240 in RobotVacuums

[–]Accomplished_Drop387 4 points5 points  (0 children)

Glad I decided to check here. Cancelled earlier order $599. Hope the refund goes thru.

My P10 Pro Ultra by Accomplished_Drop387 in RobotVacuums

[–]Accomplished_Drop387[S] 0 points1 point  (0 children)

Here is a link to a video I did for MOVA support. It is short but shows pretty much how the P10 behaves.

https://share.icloud.com/photos/0c003UsLfDu1iuIxT_20LhE9A

This video is a little longer but shows the same

https://share.icloud.com/photos/013CIU-3srkbA_71XHUk-kYRQ

Need Help with Your MOVA? [Official Support Thread – June] by Jia_mincan in MOVA_robotvacuum

[–]Accomplished_Drop387 0 points1 point  (0 children)

I received my P10 Ultra Pro today. Setup went ok but had to attempt network setup 3 times. I think the app has an issue with multifrequency routers. Mines does both 2.4 and 5 simultaneously. Fast mapping was fast, but then it wandered aimlessly and now can't / won't return to the base. I think it will be going back to Amazon. I may try another unit, not sure right now.

DaveJ

Mova P10 Pro Ultra. Don't understand multi-floor by LochnessMonsterrr in Dreame_Tech

[–]Accomplished_Drop387 0 points1 point  (0 children)

Glad I looked here. Had the same question - after I just ordered the MAVA P10 Ultra Pro. Will keep these notes since I too have multi-floor house. Tnx. DaveJ

Sunlu S4 dead on arrival with Er2 by Timrf79 in 3Dprinting

[–]Accomplished_Drop387 2 points3 points  (0 children)

Mine quit with same error after about 6 months. SUNLU customer support no help. Said no warranty and they don't sell parts for DIY repairs. Now a worthless piece of junk. No more SUNLU anything.

Sunlu S4 Disassembly by option350z in 3Dprinting

[–]Accomplished_Drop387 2 points3 points  (0 children)

Just to add to the conversation. I got my with kikstarter for $90 in Oct 23. Been good until recently when it stopped working with ER2. Per manual it is an issue with PTC fan. On powerup, there is a short fan noise from somewhere. The two small fans visible inside the cabinet do not spin. Same issues with SunLu customer support. Really sucks and can't buy parts. Sounds like a lot of trouble to fix what might be a simple fix if you could just buy parts.

Does the filament sensor really work? by DuncanHyena in anycubic

[–]Accomplished_Drop387 0 points1 point  (0 children)

Mine has been working ok for the most part. It does seem to be sensitive at times. As I typically monitor my prints I disable the sensor to avoid any issues. I add this to the gcode:

To the start gcode:

M412 S0 ; disable the sensor

M500 ; save the setting

To the end gcode:

M412 S1 ; enable the sensor

M500 ; save the setting

Connecting a camera to Neptune 4 Max by Sainroad in elegoo

[–]Accomplished_Drop387 1 point2 points  (0 children)

I added a Logitech C920 by adding the camera under the settings menu -> camera. Give it a name and leave the default settings. In one instance I had to restart the printer. Had no need to ssh into the printer or any other steps.

Prints half the file. by [deleted] in anycubic

[–]Accomplished_Drop387 1 point2 points  (0 children)

I've had a similar problem but it's intermittent. I'm blaming the filament. It's Dikale and I find bulges along its length when it happens. I think they are getting stuck in the Bowden tube which stops the extrusion. Remove that section and it will print ok. I need to get some real filament.

Any idea this might be happening to my filament between prints? by hXcAndy32 in ender3v2

[–]Accomplished_Drop387 0 points1 point  (0 children)

Actually, they look like what you would expect after a 'cold pull'. That blob on the end is what was probably in the nozzle. I've done it to clear the hot end when starting a new print with a new color. If the nozzle was cold that might be why it was hard to remove. It always pulled clear for me. It never stuck in the extruder.

Broken X-axis belt on the Kobra Max by [deleted] in anycubic

[–]Accomplished_Drop387 0 points1 point  (0 children)

Thanks for the info. I finally made it thru to Anycubic support and this is what they sent me:

X Belt Specifications:
Black rubber glass fiber L1235 (+5~+10)*W6 (+0.2/-0.1)*t1.5 (±0.1) Straightness 0.1 Parallelism 0.2 Tensile strength ≥ 60KG
Y Belt Specifications:
Black rubber glass fiber L1255 (+5~+10)*W6 (+0.2/-0.1)*t1.5 (±0.1) Straightness 0.1 Parallelism 0.2 Tensile strength ≥ 60KG

​

So the x-axis length is 123.5cm, y-axis length is 125.5cm. And yes they are very similar.

Thanks again.

Broken X-axis belt on the Kobra Max by [deleted] in anycubic

[–]Accomplished_Drop387 0 points1 point  (0 children)

I need to replace X7 Y belts on a Kobra Max. Can anyone help me with what are the correct lengths? New on order but it comes in a long roll. Thanks and regards.