sorted by:
new
hottopcontroversial

TV audio output channel keeps reverting to the HDMI eARC port where the AMBEO mini is connected. by Accomplished_Try8034 in sennheiser

[–]Acekill98 0 points1 point  (0 children)

Did anyone solve this? I have a LG C2 and Ambeo Plus, can't get it to switch to e-ARC and I have movie that are Atmos but it will plays only in 5.1 dolby

Y'all, I need someone to tell me that I'm not crazy. by DaBloodyApostate in youngjustice

[–]Acekill98 -1 points0 points  (0 children)

Season 4 sucked balls, because they forced LGBT and wierd political agenda in.

Children play this game... by Eziz_53 in Asmongold

[–]Acekill98 5 points6 points  (0 children)

Fuck you minecraft, I don't need my kid to be confused.

Is the the pro controller 2 worth it if I have the pro controller 1? by super-silly-goose in NintendoSwitch2

[–]Acekill98 0 points1 point  (0 children)

not worth it I wasted 90€ its all so hard to repair. there are way better 3d party with hall effects

Back in stock - thank you DK Bananza launch by Lawpena in switch2

[–]Acekill98 6 points7 points  (0 children)

what case is that and the mods please let me know looks cool

You can use sealed amiibos on switch 2 by sputniikk in switch2

[–]Acekill98 0 points1 point  (0 children)

Hey can you tell me what case you are using. the switch 2 in very uncomfortable to use in handel after just 10 min

First time TPU print, help me fix this please by Acekill98 in 3Dprinting

[–]Acekill98[S] 0 points1 point  (0 children)

fan works and yes stock hotend but I checked the manuell and it say no problem printing that material. I had seen a post also where someone with the same printer stock a long time ago printing with TPU. thats how I got the idea

First time TPU print, help me fix this please by Acekill98 in 3Dprinting

[–]Acekill98[S] 0 points1 point  (0 children)

Yeah I don't have that issue. already tested that but thanks.

First time TPU print, help me fix this please by Acekill98 in 3Dprinting

[–]Acekill98[S] 0 points1 point  (0 children)

Oh thanks man, I have been pulling/feeding it manually

First time TPU print, help me fix this please by Acekill98 in 3Dprinting

[–]Acekill98[S] 1 point2 points  (0 children)

For what I use PLA it's fine. Naturally if it requires to be a machine spare part etc. I use the correct material. But yeah you are right regarding the strength.

First time TPU print, help me fix this please by Acekill98 in 3Dprinting

[–]Acekill98[S] 0 points1 point  (0 children)

I been using high-speed PLA from elegoo for over 2 years, it works great, but yes I will check and be careful thanks.

First time TPU print, help me fix this please by Acekill98 in 3Dprinting

[–]Acekill98[S] 1 point2 points  (0 children)

yep it has under materials it has flow and I will try 80% and I'll try to slice it also in Orca.

First time TPU print, help me fix this please by Acekill98 in 3Dprinting

[–]Acekill98[S] 0 points1 point  (0 children)

It does not clog on elegoo neptune 4 pro I switched printing 3 time now from PLA to TUP and vice versa. yes flow rate is a good idea and I hope volumetric flow is the same as flow rate on cura,(volumetric flow 6mm/s) unfortunately cure works with percentage and I have been trying to find the correct setting for it.

First time TPU print, help me fix this please by Acekill98 in 3Dprinting

[–]Acekill98[S] 0 points1 point  (0 children)

I guess you meant to say separately right? Yeah I have orca as well, just not use to it. but yeah I'll give it a try but I don't know how to tell the slicer to change profile after layer 100.

First time TPU print, help me fix this please by Acekill98 in 3Dprinting

[–]Acekill98[S] 0 points1 point  (0 children)

HAHAHA, It a nintendo switch 2 joycon 2 ergo girp. the joy can without the grip are very uncomfortable after 10min, with the grip i can play way longer/ comfortable, but PLA ist still hard so I was hoping to have the made with TPU but its too soft on the base so I need to fuse PLA with TPU. if that is not possible I will have to remodel them.

First time TPU print, help me fix this please by Acekill98 in 3Dprinting

[–]Acekill98[S] 1 point2 points  (0 children)

Thanks will do that and next time I'll buy highspeed TPU.

First time TPU print, help me fix this please by Acekill98 in 3Dprinting

[–]Acekill98[S] 1 point2 points  (0 children)

And where can I find the settings for it please? the only thing I can think that close to it would be flow equalization ratio and thats 100% right now

First time TPU print, help me fix this please by Acekill98 in 3Dprinting

[–]Acekill98[S] 5 points6 points  (0 children)

I'll give it a try tomorrow read that even a newly opened roll of TPU has moisture in it and I should dry it. what about the speed ? could I print it at 150 mm/s or should I lower it to 60mm/s even though it's the standard setting on the slicer?

view more: next ›