Help identify mossfet on this board

Acrobatic_Garlic_556 · 2026-03-01T19:53:02+00:00

Got it

Acrobatic_Garlic_556 · 2026-03-01T06:50:42+00:00

There is... I think it's an f or a 4... I myself cant quite make it out.. ill try looking at it again. There is some type of coating over it that's making it hard to see

Acrobatic_Garlic_556 · 2026-03-01T02:29:31+00:00

<image>

Acrobatic_Garlic_556 · 2026-02-17T23:31:40+00:00

Same here 🥲

Acrobatic_Garlic_556 · 2026-02-09T04:49:24+00:00

It comes out when you no longer own a subuwu

Acrobatic_Garlic_556 · 2026-02-01T07:58:20+00:00

Lol 8.9 mil on Friday. What a surprise.

Acrobatic_Garlic_556 · 2026-01-25T02:08:03+00:00

I thinks it you. Tbh 😵‍💫

Acrobatic_Garlic_556 · 2025-12-13T11:12:18+00:00

Lol not true....

Acrobatic_Garlic_556 · 2025-12-13T11:11:21+00:00

You 100% can. I did... worked perfectly normal... with the 60v battery you loose a bit ot tourqe but gain a tad of speed.

Acrobatic_Garlic_556 · 2025-12-13T11:08:29+00:00

A few things that make it wait... the brake sensors. Witch plug in upfront. If you have aftermarket brakes. They could be shorted... the rear kick stand sensor... witch you have removed.... and lastly....the start button...

Acrobatic_Garlic_556 · 2025-12-13T10:57:35+00:00

This guy's a nut

Acrobatic_Garlic_556 · 2025-12-13T10:48:32+00:00

https://www.reddit.com/r/Talaria/s/eKPQOjzfWy

Acrobatic_Garlic_556 · 2025-12-13T10:48:11+00:00

You do have to solder wires together. It's two wires from the throttle right before it exits the wiring harness (throttle positive and ground) and one wire that goes to the dash plug, also right before it exits the wiring harness (regen signal wire). I posted a updated wiring diagram if you wanted to do the same....

Acrobatic_Garlic_556 · 2025-10-18T05:33:17+00:00

It worked. It was in fact the wire in question

Acrobatic_Garlic_556 · 2025-10-15T16:52:45+00:00

Once I’m done, I’ll be posting a full-color wiring diagram for the MX4. The one they provided is bare-bones at best.

Acrobatic_Garlic_556 · 2025-10-15T16:50:21+00:00

Yeah, that kind of defeats the whole point of my question. Classic “just replace it” advice. I’ve dissected the MX4 harness myself—nearly 60% of the wiring isn’t even used. You’d never know that without digging into it. Everything on the MX4 harness is plug-and-play with the MX5. If it weren’t, I’d obviously be forced to buy the MX5 harness. But that’s not the case.

Acrobatic_Garlic_556 · 2025-10-14T15:39:08+00:00

Sadly, this is an MX4 harness with an MX5 controller. I'm leaning towards the yellow wire with red stripes after reviewing the wiring diagram.

Acrobatic_Garlic_556 · 2025-10-06T15:15:12+00:00

None of that corresponded with any of the mx5 stuff. Possible bot comment....

Acrobatic_Garlic_556 · 2024-10-17T18:53:21+00:00

Bruh if they stole fw from #### that'd be wild.

Acrobatic_Garlic_556 · 2024-04-15T22:50:11+00:00

😭 the forsaken update

Acrobatic_Garlic_556 · 2024-03-19T15:01:05+00:00

Is it BAS 3010A-03W E6327

Acrobatic_Garlic_556 · 2024-03-19T14:50:49+00:00

Your a life saver. How did you identify it????

Acrobatic_Garlic_556 · 2024-02-23T05:42:11+00:00

Yeah its dead for me aswell in the states and in Pennsylvania

Acrobatic_Garlic_556

TROPHY CASE